Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Also known as Ethafoam.

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

Use these flexible polyurethane foam cords and circles to cushion narrow spaces, such as channels and gaps.

The open top allows these foam U-channels to slide over and cushion an edge.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

The original mouse pad material. These natural foam rubber sheets have a crisscross-textured skin on one side for a nonslip gripping surface and a layer of polyester fabric on the other side that allows objects to smoothly slide across it.

Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.

These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.

An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.

These sheets and strips will bounce back to shape, even after extended compression.

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

Seal and cushion narrow spaces in hot environments with these silicone foam cords.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Made of Buna-N foam, these sheets offer excellent oil resistance. They also resist fuel and solvents.

Cushion electronic components from impact as you protect them from electrostatic shocks during shipping and storing.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

Know at a glance when a tool is missing from a toolbox with this dual-color foam.

Stiff yet moldable, this foam takes the shape of any object that's pressed into it and will never spring back.

Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam and have a smooth, easy-to-clean facing.

The foil facing reflects heat. Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.

Fit these gaskets over connectors that plug in to your enclosure to absorb interference and prevent signal problems.

Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

Made of solid silicone foam rubber, these seals also resist water and salts.

These seals have solid construction.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

When exposed to UV rays, these cores won’t become brittle or break down. Use them to add stiffness to composite sandwiches that may be used outdoors without adding a lot of weight.

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F.

Made of rugged PVC foam, these rigid sheets absorb impact and restrict the absorption of water, air, and gas. Use in applications with operating temperatures below 32° F.

The lowest-density insulation we offer, these sheets are made of lightweight melamine foam.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

Cut these sheets to the shape you need for a custom fit.

Mount lightweight signs and trim with this economical tape.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Remove mounted objects from most surfaces without leaving residue behind.

Create strong, permanent bonds that can replace mechanical fasteners.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

This tape can withstand temperatures up to 300° F.

Use these clear shapes for strong, invisible bonds.

Cut these sheets to create a customized, permanent bond in the shape you need.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.

Quiet squeaky floor joists and reduce vibration with this foam tape.

Mix these two-part foam casting compounds and pour into your mold—they expand to fill every hole and cavity you pour them into. Because they're foam, they're lighter weight than other casting compounds.

This trim withstands temperatures up to 450° F—more than twice as high as other foam trim. Designed to cushion during impact, it protects equipment and surfaces from damage.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

You only need one free hand to tear a sheet of wrap from the box.

Create custom-fitted packaging for products of almost any size or shape. When activated, foam packs expand to fill the space around items.

Made of vinyl foam, these grips insulate and cushion vibration.

Made of vinyl foam, these grips insulate and cushion vibration. They are grooved to conform to your fingers for a comfortable, secure grasp. Slide them onto a round tool handle and use the eye to hang them.

The adhesive backing keeps these grips in place. Made of EPDM foam, they are three times thicker than standard wrap-on grips to insulate and cushion vibration.

Use the hook-and-loop closure to secure these grips anywhere on a handle—even those where the ends are not accessible such as on carts, drawers, and machine doors.

Good for food preparation areas, these earplugs have an enclosed ball bearing that can be sensed by metal detectors.