Electric Stationary Lift Tables




An electric motor and a hydraulic pump perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Material | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Hand-Operated with 120V AC External Motor | |||||||||||||||||
550 | 32" | 19 1/2" | 6"-28" | 2 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
660 | 40" | 20" | 9 1/2"-54" | 3 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
1,100 | 25 1/2" | 18" | 8 1/2"-33 1/2" | 1 3/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
1,100 | 40" | 20" | 6"-31 1/2" | 2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
1,650 | 40" | 20" | 6"-31 1/2" | 1 1/2 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Hand-Operated with 120V AC Internal Motor | |||||||||||||||||
2,000 | 48" | 28" | 8 1/2"-38 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 12 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
2,000 | 48" | 36" | 8 1/2"-38 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 15A | Three Prong | 8 | 10 | NEMA 12 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Hand-Operated with 480V AC Internal Motor | |||||||||||||||||
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Foot-Operated with 120V AC Internal Motor | |||||||||||||||||
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Single | 18A | Three Prong | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Foot-Operated with 480V AC Internal Motor | |||||||||||||||||
3,000 | 48" | 28" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
3,000 | 48" | 36" | 8 1/2"-42 1/2" | 1 1/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 56" | 32" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
5,000 | 72" | 48" | 9"-48" | 3/4 | Steel | 9 cycles per hour | Three | 2.2A | __ | 8 | 10 | NEMA 1 | ANSI MH 29.1 | 00000000 | 00000000 | 0000000 | 00000000 |
Turntable-Top Electric Stationary Lift Tables



The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Turntable Dia. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
Round with 115V AC Motor | |||||||||||||||||
2,000 | __ | __ | 11 1/2"-41 1/2" | 2 1/2 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 000000000 |
4,000 | __ | __ | 11 1/2"-41 1/2" | 1 | 10 | 43" | Steel | 25 cycles per hour | 20A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Square with 120V AC Motor | |||||||||||||||||
3,500 | 48" | 48" | 8"-44" | 3/4 | 7 | 43" | Steel | 20 cycles per hour | 17A | Three Prong | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
Floor-Load Electric Stationary Lift Tables

The tabletop can go as low as 3", making loading and unloading from the floor and pallets easier. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control. A toe guard at the base of the table provides safety for the operator.
Warning: Never use to lift people.
Floor-Load Electric Stationary Lift Tables | Optional Loading Ramp | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Duty Cycle | Motor Phase | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Includes | Each | Each | ||
With 120V AC Motor | ||||||||||||||||||
550 | 40" | 23 1/2" | 3"-29 1/2" | 2 1/2 | 10 | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 6-ft. Long Hydraulic Hose | 0000000 | 000000000 | 0000000 | 0000000 |
1,100 | 40" | 23 1/2" | 3"-30" | 1 1/4 | 10 | 9 cycles per hour | Single | 8.4A | Three Prong | 8 | 10 | NEMA 4 | ANSI MH 29.1 | 6-ft. Long Hydraulic Hose | 0000000 | 00000000 | 0000000 | 000000 |
Long-Tabletop Electric Stationary Lift Tables


An extra-large tabletop provides plenty of room for oversized loads. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Power Cord Lg., ft. | Control Cord Lg., ft. | Environmental Rating | Specifications Met | Each | Each | ||
With 120V AC Motor | |||||||||||||||||
2,000 | 96" | 48" | 6 1/2"-42 1/2" | 3/4 | 7 | Steel | 12 cycles per hour | 8.4A | Three Prong | 10 | 10 | NEMA 1 | ANSI MH 29.1 | 0000000 | 0000000000 | 0000000 | 000000000 |
Foot-Operated Stationary Lift Tables


Make repetitive lifting and positioning less of a chore. These tables have a foot lever and hydraulic pump to raise the load. A hand knob provides controlled lowering. All have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Material | Specifications Met | Each | Each | ||
440 | 25 1/2" | 19 1/2" | 5"-21" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
550 | 32" | 19 1/2" | 5"-28" | 1/2" | 13 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
660 | 40" | 20" | 9 1/2"-54" | 3/4" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
1,100 | 40" | 20" | 6"-31 1/2" | 1/2" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
1,650 | 40" | 20" | 6"-31 1/2" | 3/8" | 10 | Steel | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Stationary Air-Lift Tables


Tables come ready to operate with no hydraulics, motors, or pumps to maintain and no electrical connection required. These tables connect to your compressed air system. Durable air bags provide consistent and smooth lifting. A relief valve prevents pressure build-up to provide overload protection.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Flow Rate | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Each | Each | ||
2,000 | 48" | 48" | 8"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/4 | NPT | Female | 00000000 | 000000000 | 0000000 | 000000000 |
4,000 | 48" | 48" | 8"-32" | 3 | Steel | 80 | 15 cfm @ 80 psi | 1/4 | NPT | Female | 00000000 | 00000000 | 0000000 | 00000000 |
Air-Powered Stationary Lift Tables


Connect these tables to your compressed air system; a hydraulic pump and an air-driven motor make repetitive lifting and positioning less of a chore. Tables have a compact design, so they fit in confined spaces.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Tabletop Ga. | Material | Air Pressure, psi | Air Inlet Pipe Size | Air Inlet Thread Type | Air Inlet Gender | Elevation Speed, in./sec. | Hose Lg., ft. | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
550 | 32" | 19 1/2" | 6"-28" | 13 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 000000000 | 0000000 | 0000000 |
660 | 40" | 20" | 9 1/2"-54" | 10 | Steel | 40 | 1/4 | NPT | Female | 3/4 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 00000000 |
1,100 | 40" | 20" | 6"-31 1/2" | 10 | Steel | 40 | 1/4 | NPT | Female | 1/2 | 6 | 6 | ANSI MH 29.1 | 0000000 | 00000000 | 0000000 | 000000 |
Foot-Operated Mobile Lift Tables
Use the foot lever and hydraulic pump on these tables to raise loads to your ideal height. They have either a hand valve or lever for controlled lowering. A floor lock or wheel brakes keep these tables in place as you load and unload.
Stainless steel lift tables are made entirely of 304 stainless steel, including the foot pedal and hydraulic pump. They resist corrosion and withstand cleaners and chemicals, so they’re ideal for washdown applications. These tables are often found in food, medical, and pharmaceutical settings.
Tables with relief valve prevent pressure build-up and provide overload protection.
Warning: Never use to lift people.

Lift Tables | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wheel | Replacement Hydraulic Jack Assemblies | Replacement Seal Kits | Replacement Floor Lock Pads | |||||||||||||||||
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Handle Ht. | Brake Type | Configuration | Material | Dia. | Specifications Met | Features | Each | Each | Each | Each | ||||
Steel | ||||||||||||||||||||
330 | 27 1/2" | 18" | 8 1/2"-28 1/2" | 1 1/4" | 14 | 31 1/2" | Wheel Brake | Two Swivel and Two Rigid Casters | Rubber | 4" | __ | Relief Valve | 0000000 | 0000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
550 | 31 1/2" | 20" | 9 1/2"-31 1/2" | 1" | 14 | 36 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | Rubber | 4" | __ | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 0000000 | 000000 |
600 | 32" | 20" | 10"-33" | 1" | 7 | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
650 | 40" | 20" | 17"-62" | 3/4" | 8 | 38" | Wheel Brake | Two Swivel and Two Rigid Casters | Rubber | 6" | __ | __ | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
770 | 36" | 24" | 14"-49 1/2" | 3/4" | 14 | 38" | Floor Lock | Two Swivel and Two Rigid Casters | Rubber | 5" | __ | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
1,000 | 36" | 24" | 9 1/2"-33" | 5/8" | 7 | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
1,000 | 48" | 24" | 9 1/2"-45" | 3/4" | 7 | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
1,000 | 48" | 36" | 9 1/2"-45" | 3/4" | 7 | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
1,100 | 36" | 24" | 12"-36 1/2" | 1/2" | 14 | 38" | Floor Lock | Two Swivel and Two Rigid Casters | Rubber | 5" | __ | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
1,500 | 48" | 24" | 9 1/2"-45" | 1/2" | 7 | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | Phenolic Plastic | 5" | ANSI MH 29.1 | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
1,760 | 39 1/2" | 24" | 12"-40" | 3/8" | 14 | 39" | Floor Lock | Two Swivel and Two Rigid Casters | Plastic | 6" | __ | __ | 0000000 | 00000000 | 000000 | 00 | 000000 | 00 | 0000000 | 00000 |
2,000 | 35 1/2" | 24" | 16"-39 1/2" | 3/8" | __ | 36" | Wheel Brake | Two Swivel and Two Rigid Casters | Rubber | 8" | __ | __ | 00000000 | 00000000 | 000000 | 00 | 000000 | 00 | 000000 | 00 |
Stainless Steel | ||||||||||||||||||||
1,000 | 40" | 20" | 17"-40" | 5/8" | 12 | 43" | Wheel Brake | Two Swivel and Two Rigid Casters | Rubber | 6" | __ | __ | 00000000 | 00000000 | 00000000 | 000000000 | 00000000 | 0000000 | 000000 | 00 |
Battery-Powered Mobile Lift Tables
Push the button and a hydraulic pump adjusts the load. Tables run on a motor that is powered by a sealed, maintenance-free battery and built-in charger. To keep from moving while you load or unload, these tables come with either a floor lock or wheel brakes.
Warning: Never use to lift people.

Lift Tables | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wheel | Replacement Batteries | Replacement Hand Pendants | Replacement Starter Solenoids | ||||||||||||||||||||
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Duty Cycle | Batteries Included | Tabletop Ga. | Material | Handle Ht. | Brake Type | Configuration | No. of Brakes | Material | Dia. | Environmental Rating | Each | Each | Each | Each | ||||
1,000 | 36" | 24" | 9 1/2"-33" | 2 1/4 | 15 cycles per hour | Yes | 7 | Steel | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | __ | Phenolic Plastic | 5" | NEMA 1 | 0000000 | 000000000 | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
1,000 | 39 1/2" | 20 1/2" | 17 1/2"-37 1/2" | 4 | 12 cycles per hour | Yes | 11 | Steel | 56 1/2" | Wheel Brake | Two Swivel and Two Rigid Casters | 2 | Polyurethane Rubber | 6" | __ | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 | 000000 | 00 |
1,000 | 39 1/2" | 20 1/2" | 19 1/2"-63 1/2" | 3 1/2 | 12 cycles per hour | Yes | 11 | Steel | 46 1/2" | Wheel Brake | Two Swivel and Two Rigid Casters | 2 | Polyurethane Rubber | 6" | __ | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 | 000000 | 00 |
1,500 | 48" | 24" | 9 1/2"-45" | 1 3/4 | 15 cycles per hour | Yes | 7 | Steel | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | __ | Phenolic Plastic | 5" | NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
1,500 | 48" | 36" | 9 1/2"-45" | 1 3/4 | 15 cycles per hour | Yes | 7 | Steel | 35 1/2" | Floor Lock | Two Swivel and Two Rigid Casters | __ | Phenolic Plastic | 5" | NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
2,000 | 40" | 20" | 19"-38" | 2 3/4 | 12 cycles per hour | Yes | 11 | Steel | 46 1/2" | Wheel Brake | Two Swivel and Two Rigid Casters | 2 | Polyurethane Rubber | 6" | __ | 00000000 | 00000000 | 00000000 | 000000 | 00000000 | 000000 | 000000 | 00 |
Hand-Crank Mobile Lift Tables

Move these tables where you need them, then use the hand crank to adjust your work to a comfortable height. They are entirely mechanical, so they're ideal for precise positioning—as you crank, the tabletop moves in consistent increments. These tables also hold their exact height for as long as you need, unlike hydraulic lift tables, which sag over time under heavy loads. Remove the handle when you’re done cranking.
Scissor-style tables are easier to store than four-post tables because they lower to a shorter height. Polyurethane wheels are nonmarking, abrasion resistant, and shock absorbing. Use them on all floor types, including areas with debris.
Warning: Never use to lift people.
Wheel | Polyurethane Rubber Wheels | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Elevation per Stroke | Tabletop Ga. | Top Thick. | Material | Brake Type | Configuration | No. of Brakes | Dia. | Each | |
Scissor-Style Tables | |||||||||||||
330 | 28" | 18" | 14"-28" | 1/4" | 12 | 1.25" | Steel | Wheel Brake | Two Swivel and Two Rigid Casters | 2 | 4" | 00000000 | 0000000 |
660 | 37" | 24" | 18"-39" | 1/4" | 12 | 1.25" | Steel | Wheel Brake | Two Swivel and Two Rigid Casters | 2 | 5" | 00000000 | 000000 |
1,000 | 40" | 26" | 21"-40" | 1/4" | 12 | 1.25" | Steel | Wheel Brake | Two Swivel and Two Rigid Casters | 2 | 5" | 00000000 | 000000 |
Spring-Actuated Auto-Leveling Pallet Stands—Not for Lifting

Use one to three springs (included) to automatically maintain a convenient ergonomic working height based on the load. A built-in damper provides smooth and gradual raising and lowering without bounce. The turntable rotates 360° to reduce reaching. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.
Warning: Not for lifting. Never use to support people.
Capacity, lbs. | Turntable Dia. | Lg. | Wd. | Ht. | Material | No. of Springs | Forklift Entry | Each | |
400-4,500 | 43 5/8" | 36 1/4" | 36 5/8" | 9 1/2"-27 1/2" | Steel | 3 | Yes | 0000000 | 000000000 |
Air-Actuated Auto-Leveling Pallet Stands—Not for Lifting

These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.
Warning: Not for lifting. Never use to support people.
Air Inlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Turntable Dia. | Lg. | Wd. | Ht. | Material | Actuator Material | Pipe Size | Thread Type | Gender | Forklift Entry | Specifications Met | Each | |
250-4,000 | 43" | 49" | 24 3/8" | 10 1/2"-30 1/2" | Steel | Rubber | 1/4 | NPT | Female | Yes | ANSI MH 29.1 | 000000 | 000000000 |
Adjustable Pallet Stands—Not for Lifting


Reduce back strain and fatigue while loading and unloading materials—these pallet stands raise pallets to a comfortable working height. They hold standard-sized pallets on a stable platform that’s accessible from all sides.
Post stands can be raised or lowered in 2" increments. To secure them at your desired height, loosen the included bolts, reposition the platform, and put the bolts back into the slots. These stands are not as easy to adjust as scissor pallet stands.
Scissor stands can be adjusted quickly and easily by one person. A handle and pin lock the platform securely into place. Height is manually adjustable from the folded storage height of 8 3/4" up to 24", 30 1/2", and 34". Use an optional turntable to rotate your load. Note: Do not exceed the capacity of the pallet stand.
Warning: Not for lifting. Never use to hold people.
Pallet Stands | Turntables | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, lbs. | Lg. | Wd. | Ht. | Material | Color | Frame Material | Frame Color | Forklift Entry | Features | Each | Each | ||
Post | |||||||||||||
4,000 | 48" | 40" | 27 1/2"-43 1/2" | Powder-Coated Steel | Gray | Powder-Coated Steel | Gray | No | __ | 000000000 | 0000000 | 000000 | 00 |
4,000 | 48" | 48" | 27 1/2"-43 1/2" | Powder-Coated Steel | Gray | Powder-Coated Steel | Gray | No | __ | 000000000 | 000000 | 000000 | 00 |
Scissor | |||||||||||||
4,000 | 40" | 40" | 8 3/4", 24", 30 1/2", 34" | Steel | __ | Steel | __ | No | Handle | 0000000 | 000000 | 0000000 | 0000000 |