Remove the pin on your door's hinge, slide it through one of these stops, and then insert it back into the hinge to set and adjust the door's opening angle. Both stops have nonmarking rubber pads, which are abrasion resistant. Use the locking screw or threaded stud to make your adjustments.

For technical drawings and 3-D models, click on a part number.

Simply screw these bumpers into baseboards with the attached self-tapping wood screw to prevent doors from damaging walls. All of these stops have a nonmarking rubber pad, which is abrasion resistant.

Style 1 stop has a flexible spring base that is more forgiving with doors.

For technical drawings and 3-D models, click on a part number.

Press these silencers into a drilled hole in the door frame. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames. Made of rubber, they are abrasion resistant. They require 1/8" of clearance between the door and the frame.

For technical drawings and 3-D models, click on a part number.

Protect large swinging doors where carts and vehicles are used to push the door open. These plastic bumpers are commonly used on two-way swinging doors. All are chemical resistant and won't dry out and become brittle when exposed to UV rays. Mount with the included screws.

For technical drawings and 3-D models, click on a part number.

Protect door knobs and other hardware from damage caused by carts, dollies, and other equipment. Mount these bumpers on doors next to, above, below, or over the item you wish to protect. Install them with screws.

Plastic bumpers are chemical resistant. They won't dry out and become brittle when exposed to UV rays.

Stainless steel bumper has excellent corrosion resistance, making it the best choice for harsh environments. It also has good chemical resistance.

For technical drawings and 3-D models, click on a part number.