The toughest bits available, these withstand the shock and twisting force of impact drivers.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

An exterior stop collar prevents fasteners from being driven too deep. Use with soft material such as drywall, wood, and fiberboard.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Thread these bits directly into your driving tool for minimal wobble in assembly applications.

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

Bits have a different size at each end.

Strong and durable, these multipurpose bits are for use with bit screwdrivers.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

When you don't have exact alignment between the fastener and the bit, the ball end allows angled entry to turn screws in hard-to-reach areas. A retaining ring grips inside the recess to hold screws in place.

Strong and durable, these multipurpose bits are often used with power tools to install sheet metal screws.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

The slightly tapered tip wedges into the screw recess for a secure hold. Also known as Torx-Align bits.

Bits have a different size at each end.

The toughest bits available, these withstand the shock and twisting force of impact drivers. Designed for screws with a square recess in the head, they are also known as Robertson bits.

Bits have a different size at each end.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

Use with screws that have two drilled holes.

Ribs forged into the wings of these offset-cross-shaped bits grip the screw recess to reduce stripping. They are also known as ACR® bits.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

These bits provide a secure grip on the Phillips/slotted combination-drive screws in electrical equipment.

These are also known as TP3® bits.

These are also known as known as butterfly and Type G bits.

These bits have a 4 mm HIOS shank. To fit in a 1/4" hex shank driver, use an adapter.

An opening at the tip accommodates the pin in the recess of tamper-resistant Phillips screws. These are also known as pin-in-head Phillips bits.

Grip the indentations on the head of tri-groove fasteners.

While screws with a square/Phillips combination drive can be turned with either a square or Phillips bit, these make the best contact so you can apply high torque without slipping and stripping the recess. They are also known as Quadrex bits.

Also known as Polydrive bits.

The toughest bits available, these withstand the shock and twisting force of impact drivers. A magnet holds the nut in place.

Turn hex nuts and cap screws.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

A retaining ring grips inside the recess to hold screws in place. These bits have a ball end that allows angled entry to drive screws in hard-to-reach areas.

The slightly tapered tip wedges into the screw recess for a secure hold. These are also known as Torx-Align bits.

Also known as Robertson bits these are designed for screws with a square recess in the head.

A magnet holds the nut in place.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

Also known as Bristol bits, these have a knurled-end shank that allows finger tightening. They can also be used with the included screwdriver.

These bits have an offset cross shape.

The six rounded points fit the star-shaped recess of Torx-Plus screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.

Lock your bit into the adapter to prevent accidental disengagement. These adapters hold hex-shank bits (also known as insert bits) in powered tools.

A magnetic ring at the end of the adapter holds flat-head screws in place to ensure good contact between the bit and screw. Use these adapters to hold hex-shank bits (also known as insert bits) in powered tools.

The head is angled 90° to drive fasteners in tight spaces. Use these adapters to hold hex-shank bits (also known as insert bits) in powered tools.

These adapters are designed to withstand the high torque of impact drivers. They hold hex-shank bits (also known as insert bits).

Insert these adapters into your SDS-drive rotary hammer to use it with hex-shank bits (also known as insert bits).

Designed to withstand high torque and force, these adapters fit the square drive on impact wrenches. Use with hex-shank bits (also known as insert bits).

Keep these caddies in your tool drawer or take them with you.

Mount the magnetic base to walls, cabinets, and other steel surfaces.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.

Operate these tools like a standard bit driver and access hard-reach fasteners with the offset head. Insert a bit and a magnet holds it in place.

Insert a bit into the shaft and a magnet holds it in place.

LEDs light the tip so you can use these tools in dark areas.

Also known as ESD-safe bit screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.

Remove and replace the reversible shaft to change the tip of the tool. Sets include a handle and multiple shafts.

A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

Choose a handle based on torque and change shafts to use a different size or drive style. Factory-set screwdrivers ensure you reach the same torque every time.

Use these tools with 1/4" hex shank screwdriver bits. The rotating end cap on the handle allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.

These assorted shafts attach to a handle or can be used with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

The six lobes of the External Torx-Plus drive are flattened at the top to maximize their grip on fasteners, which keeps these sockets from slipping off during high-torque installations.

Use bit sockets as an alternative to a screwdriver or L-key.

These sockets are also known as pin-in-Torx bits.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

With sizes from EP10 to EP24, these sets have the sockets you need to install and remove a wide range of External Torx-Plus fasteners. Pair them with a square drive tool, such as a socket wrench, to deliver high levels of torque without slipping.

These sockets are made to withstand the high torque and force of impact tools.