These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

The brass tip on the end of the threaded stud prevents damage to surfaces in applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Use these handles for applications involving frequent positioning, tightening, and holding adjustments near food processing lines without the risk of contaminating the food. These handles are also known as clamping handles.

With a surface resistivity of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. Install them on a threaded stud.

These handles are often used for operating machinery.

Attach a ball knob to one of these shafts to create custom handles for operating machinery.

Also known as quill-feed handles, these handles engage and disengage with a flick of the wrist to speed machining operations—especially when drilling deep holes.

Also known as double cams, these complete cam handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Use these handles to keep holes aligned or lift several sheets of thin material. They have a plug that expands to grip the edges inside holes. They are not suitable for permanent installation—use only for temporary mounting.

Identify equipment controls and components at a glance by their color. Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Bonded to the stud is an acrylic adhesive that adds friction to resist loosening from vibration. Use these knobs to position, tighten, and hold fixtures, equipment, and machinery. They mount into a threaded hole.

Suitable for food-processing areas, these one-piece knobs have no joints to collect dirt or debris. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.

Knobs have left-hand threads; they're used in applications where counterclockwise motion can loosen common right-hand threads. Mount them into a threaded hole to position, tighten, and hold fixtures, equipment, and machinery.

Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Identify equipment controls and components at a glance by their color. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery.

Quick to install, position, and remove, these knobs have an angled hole that allows you to tilt the knob to slide it over threads, then straighten it to grip the threads and secure the knob. They provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.

Identify equipment controls and components at a glance by their color. Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Designed for sanitary environments, these knobs are commonly used in pharmaceutical and food-processing facilities. Install them on threaded studs to position, tighten, and hold equipment.

Never lose these knobs—tether them to equipment to keep them where you need them. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Install them on a threaded stud.

To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Convert screws into knobs so large you can grip them with heavy work gloves. Slip these knobs onto a hex or socket head screw and tighten the set screw to secure. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

A handle makes these knobs easy to turn. Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

A handle makes these knobs easy to turn. Tap custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.

Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Primarily used on spigot valves, slide these knobs over valves with a square stem and secure them in place with your fastener.

A rubber coating provides a comfortable grip. Good for control levers and push-pull rods, these easy-to-grip ball knobs install on a threaded stud.

Mount these oval, easy-to-grip ball knobs on a threaded stud. They're good for control levers and push-pull rods.

To build a custom precise-control knob or thumb screw, pair one of these knobs with a socket head screw. Turn the knob to move the screw 0.005" per graduation and make precise adjustments.

For monitoring the number of shaft turns on instrumentation, these knobs have easy-to-read scales or digits for quick and accurate readings. Use them on devices with round shafts.

Quickly identify equipment controls and components by their color. Use these knobs to control devices with round shafts and view settings at a glance with a pointer.

Install these knobs on a threaded stud. Insert a bar between the arms and twist. The bar provides maximum leverage to tighten knobs securely.

With a mounting hole center-to-center distance of 1" or less, these are the smallest pull handles we offer. Thread screws through holes from the back of your surface into the handles to open and close tiny doors and drawers.

Suitable for use with food-processing equipment, these handles are made of FDA listed materials.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Designed to meet DIN EN 61340-5-1, these handles reduce static electricity that can damage electronic equipment. Fasten them directly to the front of your surface to open and close a variety of doors and drawers.

For applications that require a large gripping area, these handles have a center-to-center distance of 12" or more. Fasten them directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread a screw through a hole from the back of your surface into the knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread these sanitary knobs into holes so you can open doors and drawers in hygienic environments.

With a sanitary design, these threaded-hole knobs are often used to open and close doors and drawers on furniture, machines, and other equipment in pharmaceutical and food-processing facilities.

Add or replace handles on drums and barrels. All of these handles have a curved mounting plate that sits flush against the surface and a folding grip that drops out of the way when you let go. Fasten them directly to the front of the surface.

Fasten these handles directly to the front of your surface. They fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Detents keep these handles in the extended or folded position—they won't move until you reposition them.

These handles have a folding grip that drops out of the way when you let go. Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle.

Press on the top of the handle grip and it rotates out for use. Often used on hatches and pocket doors, these handles fit into a cutout, so they are flush with the mounting surface. Fasten them directly to the front of the surface.

Insert studs into holes in your surface and fasten with locknuts from the backside to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they are flush with the mounting surface.

Round long shafts can pass through these handles for mounting versatility. Create custom threads or drill a hole in the side of the hub to secure with a set screw. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

Balanced weight distribution prevents unintentional handle movement, even in high-vibration applications. Mill specific holes or keyways in the hub to meet your specifications or weld in place. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

A combination ratchet arm and revolving-grip crank handle makes frequent machinery adjustments in tight spaces fast and easy.

These metric thumb screws have a large head that allows you to grip them with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

A knurled head allows for slip-resistant controlled adjustment.