The slim body reaches into tight spots to grip and turn screws that are hard to reach or too small to hold by hand.

Sets include an assortment of screw starters for gripping and turning screws that are too small to hold by hand or located in hard-to-reach spots.

An insulated handle and body protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900. They grip and turn screws that are too small to hold by hand or located in hard-to-reach spots.

Keep bits from slipping. Insert a bit into the adapter, place a screw on the end of the bit, and slide the adapter sleeve over the screw. The sleeve retracts as the screw is driven. These adapters hold hex-shank bits (also known as insert bits) in powered tools.

The head is angled 90° to drive fasteners in tight spaces. Use these adapters to hold hex-shank bits (also known as insert bits) in powered tools.

Bend these adapters up to 90° to access hard-to-reach fasteners. Use them to hold hex-shank bits (also known as insert bits) in powered tools.

Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.

Eliminate the need for multiple bulky tools with these bit adapters. At less than 3 inches long, these compact adapters convert ¼” bit screwdriver handles and ¼” bits into torque screwdrivers so you can fasten to a specific torque.

Designed to withstand high torque and force, these adapters fit the square drive on impact wrenches. Use with hex-shank bits (also known as insert bits).

A magnet or retaining ring holds the nut in place.

A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

The slightly tapered tip wedges into the screw recess for a secure hold. Also known as Torx-Align bits.

A magnet holds the nut in place.

The assorted drivers in these sets have a holding mechanism at the tip that ensures the screw won’t slip off.

The shaft and handle are drilled all the way through for turning nuts on any length of threaded rod. These drivers have a magnet in the tip to hold nuts in place.

A magnet in the tip holds nuts in place.

A magnetized tip holds the screw in place. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

A retaining ring on the tip grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.

These assorted keys have a ball-end tip with a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.

These assorted keys have a detent that grips inside the recess to ensure screws won’t fall off. The ball end allows angled entry to drive fasteners in hard-to-reach areas.

These assorted keys have a retaining ring at the tip that grips inside the recess to ensure screws won’t fall off.

A magnet holds the fastener securely enough to drive self-tapping screws.

These boxes have a coating on the dividers that protects metal parts from rust and corrosion.

Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.

Adjust the dividers to create the size and number of compartments that you need.

Handy on forklifts and scaffolding, these trays hang on square and rounded rails to keep tools and supplies waist height.

Use a box as is, or snap on additional boxes to create a mobile storage system that fits your needs.

A rubber seal in the lid keeps water out.

Add pockets to a traffic cone for easy access to flashlights, hand tools, and small parts.

Protect sensitive parts from electrostatic discharge.

These bins dissipate static charges to protect sensitive contents from damage.

Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A raised front and back prevents spills.

Attach these bin boxes to any steel surface, such as machinery and cabinets, to keep small tools and parts nearby.

Grab the handle to pull the bin box forward. It has a tab on the back to catch the underside of a shelf when tilted. A high front and back prevents spills.

These bins are very strong, with a capacity of 250 lbs. They're also chemical, solvent, and oil resistant.

Stack bin boxes up to four high without removing the casters.

The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.

These bins ship flat so you can keep plenty of extras on hand. They easily assemble without tape, glue, or fasteners.

Protect sensitive parts from electrostatic discharge.

An aluminized finish makes these pans corrosion resistant.

Made of silicone, these trays bend to hug curves and cling to highly polished surfaces—keeping your tools right where you need them.

Racks can be used individually or stacked up to nine high.

Pull out the bin boxes for easy access to contents.

Store multiple tools and parts in these bins, which spin so you can easily access the item you need.

Roll these bins near benches or other work areas, and turn each storage level to access the items you need.

When loosened, you can spin the body of this clamp around its mounting point for better access to the workpiece.

Combine fast-threading components to build a clamping assembly.

Protect your sensitive components from electrostatic damage.

Carry multiple compartmented boxes at once using the built-in handle.

Plastic cabinets and boxes won't dent, chip, or rust.

Keep tools and small parts in place and protected from damage.

These cabinets have the thickest steel construction that we offer and come with removable bin boxes that hang from panels.

Keep an eye on inventory without opening the doors.

Turn a tight space into an efficient storage center with these shallow-depth cabinets.

Use with any type of sheet metal or wood screw.

Also known as lag shields, these anchors are designed for use with large-diameter wood screws.

These 18-8 stainless steel anchors have good chemical resistance.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

A zinc plating provides corrosion resistance in wet environments.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

The fastest way to install shallow-hole female-threaded anchors. Just push the tip of the tool into the anchor and turn the tool with a power drill.

Drive these tools with a hammer to expand anchors.

For narrow holes and small cavities where toggle anchors won't fit.