Eliminate the need for multiple bulky tools with these bit adapters. At less than 3 inches long, these compact adapters convert 1/4" bit screwdriver handles and 1/4" bits into torque scredrivers so you can fasten to a specific torque. Insert your drive handle and turn clockwise until the hash marks line up with the torque value you need. Not for use with power tools.

For technical drawings and 3-D models, click on a part number.

Keep these caddies in your tool drawer or take them with you.

Lock your bit into the chuck to prevent accidental disengagement. Pull back on the chuck to insert a bit in the magnetic holder; push it forward to lock it in place.

Bits are held in place with a retaining ring or included set screw rather than a magnet, so the tool won't attract loose metal parts and shavings. Bits are not included.

T-handle drivers have a longer reach than standard and make it easier to turn fasteners from above. The cushion grip provides comfort.

Insert a bit into the shaft and a magnet holds it in place.

Tamper-resistant hex are also known as pin-in-hex.

Tamper-resistant Torx are also known as pin-in-Torx.

Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque.

The offset head can access fasteners in tight spots where there isn't clearance to turn a standard bit driver. A magnet holds bits in place. These tools have a multicomponent ultra-grip handle that provides comfort and the best possible grip for achieving maximum torque. The head can be removed from the handle and used with power drills that accept a 1/4” hex shank.

A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.

Style A have an offset head to access screws in obstructed areas. A retaining ring holds the bit, and the plastic handle provides comfort and a secure grip.

Style B accept two shank sizes, held in place by magnets.

Style C accept two shank sizes and have offset heads to access screws in obstructed areas. Magnets hold the bits.

Style D have a knurled handle you turn with your fingertips. A magnet holds the bit.

Style E have seven interchangeable bits—all of which are compatible with power tools. Store them inside the handle so they don’t get lost or misplaced when you’re not using them. Bits are held in place by magnets. To use these screwdrivers as a nutdriver, remove the bit and turn fasteners with the shaft.

A ratchet mechanism turns fasteners more quickly than a standard driver. Insert a bit into the shaft and a magnet holds it in place.

T-handle drivers have a longer reach and make it easier to turn fasteners from above.

Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. These tools have a magnet at the end of the shaft that holds bits in place. The contoured ultra-grip handle provides comfort and the best possible grip for achieving maximum torque.

Also known as ESD-safe bit screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. A quick-change chuck holds bits in place. Place the bit in the chuck to automatically secure the bit and then push the chuck forward to remove the bit. Bits are not included. These tools have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.

Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and EN 60900. A magnet holds the bit in place.

LEDs light the tip so you can use these tools dark areas. Bits have a different tip at each end and snap into the shaft.

Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.

Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque. For those without a voltage detector, bits turn four screw sizes and the shaft two external hex sizes. Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft three external hex sizes.

Cushion-grip drivers offer comfort and some slip resistance. Bits turn eight screw sizes and the shaft three external hex sizes.

When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible and turns two external hex sizes. Drivers have a cushion grip for comfort and some slip resistance.

Drill, countersink, and drive screws without switching three separate bits in and out of your power tool. With a single hand, flip between drilling countersunk holes and driving screws. The countersinking drill and screwdriver bit are secured with set screws, so you can switch them out for any bits with a 1/4” hex shank.

The countersinking drill has an 82° angle, allowing inch-sized flat- and oval-head screws to sit flush with the surface.

For technical drawings and 3-D models, click on a part number.