These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 standards. When set torque is reached, these drivers signal with an audible click.

Reach the same torque every time with factory-set screwdrivers that slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

When working in tight spaces, these short drivers fit where others can't. They're factory set to ensure you reach the same torque every time.

Rated for ISO Class 5 (Fed. Std. Class 100) clean rooms, these tools have a sealed handle to keep lubrication in and contaminants out. Factory-set screwdrivers ensure you reach the same torque every time.

A green light and a beep alert you when you've reached 90% of your set torque, and a steady tone sounds once you've hit your target. Set your torque in cNm, cm-Kg, or in.-lbs. and quickly check the LCD for real-time measurements along the way. A red light warns if you begin to overtighten.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.

Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Turn sockets from above when there's not room to swing a standard wrench handle.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.