Screwdrivers
These standard screwdrivers can be found in every tool box.
For technical drawings and 3-D models, click on a part number.
Ultra-Grip Screwdrivers
These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
Square drivers are also known as Robertson screwdrivers.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Screwdrivers for Chiseling and Demolition
A shaft that extends through the handle and a steel end cap gives these drivers the strength to absorb hammer blows. The ultra-grip handle is contoured to provide comfort and the best possible grip.
Shaft | |||||||
---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Each | |
Phillips | |||||||
No. 4 | 12 1/2" | 8" | 3/8" | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
Screwdrivers with Tether Ring
When working at heights, secure a lanyard to the ring on these tools and prevent drops. The ring rotates around the shaft so the driver turns freely. Use with Tool Lanyards that have a 1/4" minimum tool opening (not included).
Shaft | ||||||||
---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Ring ID | Each | |
Phillips | ||||||||
No. 4 | 10 3/4" | 6" | 3/8" | Chrome-Plated Steel | Plastic | 1/4" | 0000000 | 000000 |
Electrical-Insulating Screwdrivers
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN, IEC, or ASTM standards.
Ultra-grip drivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
Shaft | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Lg. | O'all Wd. | Shaft Type | Material | Handle Material | Grip Style | Specifications Met | Each | |
No. 4 | 12 1/4" | 8" | 15/32" | Standard | Plastic-Coated Steel | Plastic | Ultra Grip | EN 60900 | 0000000 | 000000 |
Electrical-Insulating Screwdriver Sets
The assorted screwdrivers in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards. Drivers have a contoured ultra-grip handle that provides comfort and the best possible grip for achieving maximum torque.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Includes | Shaft Type | Material | Handle Material | Specifications Met | Each | |
5 | No. 0 Phillips Screwdriver—6 3/8" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8 1/4" O'all Lg. No. 3 Phillips Screwdriver—10 1/4" O'all Lg. No. 4 Phillips Screwdriver—12 1/4" O'all Lg. | Standard | Plastic-Coated Steel | Plastic | EN 60900 | 0000000 | 000000 |
Nonsparking Screwdrivers
Made of beryllium copper that is FM approved, these nonmagnetic screwdrivers help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Warning: Do not use these tools in direct contact with acetylene.
Shaft | ||||||||
---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Lg. | O'all Wd. | Material | Handle Material | Specifications Met | Each | |
Phillips | ||||||||
No. 4 | 13" | 8" | 3/8" | Beryllium Copper | Plastic | FM Approved | 000000 | 000000 |
Bit Screwdrivers
Insert a bit into the shaft and a magnet holds it in place.
Shaft | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
No. of Sizes | Sizes Included | O'all Lg. | Lg. | O'all Wd. | Shaft | Bit | Handle | Grip Style | Features | Each | |
For 1/4" Bit Hex Shank Size | |||||||||||
26 | Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2mm, 2.5mm, 3mm, 5mm Drilled Spanner: No. 4, No. 6, No. 8, No. 10 Tamper-Reistant Torx: T7, T8, T10, T15, T20, T25, T27, T30, T40 Torq Set®: No. 6, No. 8, No. 10 | 8 1/2" | 3 3/8" | 5/16" | Stainless Steel | Steel | Plastic | Plain | Bit storage inside tool | 0000000 | 000000 |
Phillips Bits
Strong and durable, these multipurpose bits are often used with power tools to install sheet metal screws.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
Drive Size | For Screw Size | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
No. 4 | 5/16", 3/8", 7/16", 1/2" | 1 1/4" | Steel | 0000000 | 00000 |
1/4" Hex Shank Size for Power Tools | |||||
No. 4 | 5/16", 3/8", 7/16", 1/2" | 2" | Steel | 0000000 | 0000 |
No. 4 | 5/16", 3/8", 7/16", 1/2" | 12" | Steel | 0000000 | 0000 |
5/16" Hex Shank Size | |||||
No. 4 | 5/16", 3/8", 7/16", 1/2" | 1 1/4" | Steel | 0000000 | 0000 |
High-Torque Phillips Bits
Less likely to crack or break apart under high torque than standard bits, these are often used with power tools to install machine screws.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
Slip-Resistant Phillips Bits
Ribs forged into the wings of these bits grip the screw recess to reduce slipping and stripping. They're also known as ACR® bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Drive Size | For Screw Size | Overall Lg. | Material | Each | |
5/16" Hex Shank Size | |||||
---|---|---|---|---|---|
No. 4 | 5/16", 3/8", 7/16", 1/2" | 1 1/4" | Steel | 0000000 | 00000 |
Square Bits
Designed for screws with a square recess in the head, these are also known as Robertson bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
Drive Size | For Screw Size | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
No. 4 | 5/16", 3/8", 7/16", 1/2" | 1" | Steel | 0000000 | 00000 |
1/4" Hex Shank Size for Power Tools | |||||
No. 4 | 5/16", 3/8", 7/16", 1/2" | 2" | Steel | 0000000 | 0000 |
No. 4 | 5/16", 3/8", 7/16", 1/2" | 2 7/8" | Steel | 0000000 | 0000 |
No. 4 | 5/16", 3/8", 7/16", 1/2" | 3 1/2" | Steel | 0000000 | 0000 |
No. 4 | 5/16", 3/8", 7/16", 1/2" | 6" | Steel | 0000000 | 0000 |
No. 4 | 5/16", 3/8", 7/16", 1/2" | 12" | Steel | 0000000 | 00000 |
Square Bits for Stainless Steel Screws
Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk. Designed for screws with a square recess in the head, they are also known as Robertson bits. Also called insert bits, use in hand drivers or with a bit adapter in power tools.
Drive Size | For Screw Size | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
No. 4 | 5/16", 3/8", 7/16", 1/2" | 1" | Stainless Steel | 0000000 | 00000 |
Pozidriv® Bits
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Drive Size | For Screw Size | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
No. 4 | 1/4" | 1 1/4" | Steel | 0000000 | 00000 |
Tri-Wing® Bits
A three-winged tip fits triangular slotted screw recesses.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
Hi-Torque Bits
Also known as insert bits, these are used in hand drivers or with a bit adapter in power tools.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Material | Each | |
1/4" Hex Shank Size | ||||
---|---|---|---|---|
No. 4 | 1 1/4" | Steel | 0000000 | 000000 |
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
Hex | Tamper-Resistant Hex | Phillips | Slotted | Torx | Square | |
Drilled Spanner | Pozidriv® | Tamper-Resistant Torx | Torq-Set® | Tri-Wing® |
No. of Pieces | Components Included | Bits Included | Adapters Included | Drive Tools Included | Each | |
1/4" Hex Shank Size—Steel | ||||||
---|---|---|---|---|---|---|
30 | 26 Bits 3 Adapters 1 Drive Tool | Drilled Spanner: No. 6, No. 8 No. 10 (1" O'all Lg.) Pozidriv®: No. 2 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64" T25, T27, T30, T40 (1" O'all Lg.) 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Tamper-Resistant Torx: T9, T10, T15, T20 Torq-Set®: No. 5, No. 8 (1" O'all Lg.) Tri-Wing®: No. 4, No. 5 (1" O'all Lg.) | 1/8" Male Square Drive × 1/8" Hex Shank Adapter 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 8 3/4" Lg. Bit Screwdriver | 000000 | 000000 |
39 | 36 Bits 2 Adapters 1 Drive Tool | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.) Phillips: No. 1, No. 2 (1" O'all Lg.) Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 1/4", 5/16" (1" O'all Lg.) Square: No. 1, No. 2, No. 3 (1" O'all Lg.) T25, T27, T30, T40 (1" O'all Lg.) Tamper-Resistant Hex: 5/64", 3/32", 7/64" 1/8", 9/64", 5/32" (1" O'all Lg.) Tamper-Resistant Torx: T8, T10, T15, T20 Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.) Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.) | 1/4" Female Square Drive × 1/4" Female Hex Adapter 2 1/4" Lg. Bit Adapter for Power Tools | Screwdriver Handle | 0000000 | 00000 |
100 | 96 Bits 4 Adapters | Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | __ | 000000 | 00000 |
1/4" Hex Shank Size for Power Tools—Steel | ||||||
50 | 50 Bits | Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. | __ | __ | 000000 | 000000 |
Tri-Wing® Bit Sets
A three-winged tip fits triangular slotted screw recesses. Also known as insert bits, use these in hand drivers or with a bit adapter in power tools.
Components Included | Bits Included | Material | Container Type | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
6 Bits | Tri-Wing®: No. 0, No. 1, No. 2, No. 3, No. 4, No. 5 (1" O'all Lg.) | Steel | Plastic Caddy | 0000000 | 000000 |
Torq-Set® Bit Sets
These bits have an offset cross shape.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
For technical drawings and 3-D models, click on a part number.
Components Included | Bits Included | Material | Container Type | Each | |
1/4" Hex Shank Size | |||||
---|---|---|---|---|---|
10 Bits | Torq-Set®: No. 4, No. 6, No. 8, No. 10, 1/4" (1" O'all Lg.)—2 ea. | Steel | __ | 00000000 | 000000 |
1/4" Hex Shank Size for Power Tools | |||||
10 Bits | Torq-Set®: No. 4, No. 6, No. 8, No. 10, 1/4" (1 1/4" O'all Lg.)—2 ea. | Steel | Plastic Caddy | 00000000 | 00000 |
Impact Screwdrivers
Phillips | |
Slotted |
Break stuck screws free using screwdriver bits. Strike the end of the handle with a hammer to turn the bit and tighten or loosen fasteners. Use these tools as an impact wrench without the bit adapter.
Number of Sizes | Sizes Included | Drive Size | For Bit Hex Shank Size | Overall Lg. | Material | Finish | Bit Material | Each | |
3/8" Square Drive Size | |||||||||
---|---|---|---|---|---|---|---|---|---|
5 | Phillips: No. 1, No. 2, No. 3, No. 4 Slotted: 3/8" | No. 1, No. 2, No. 3, No. 4, 3/8" | 5/16" | 5 1/4" | Steel | Black Oxide | Steel | 000000 | 000000 |
1/2" Square Drive Size | |||||||||
5 | Phillips: No. 1, No. 2, No. 3, No. 4 Slotted: 3/8" | No. 1, No. 2, No. 3, No. 4, 3/8" | 5/16" | 5 1/4" | Steel | Black Oxide | Steel | 0000000 | 00000 |
Phillips Bit Sockets
For technical drawings and 3-D models, click on a part number.
Pozidriv® Bit Sockets
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Material | Bit Replaceable | Specifications Met | Each | |
1/2" Square Drive | ||||||
---|---|---|---|---|---|---|
No. 4 | 2 3/8" | Chrome-Plated Steel | No | ISO 1174, ISO 8764-1 | 00000000 | 000000 |
Tri-Groove Sockets
Grip the indentations around the outside of tri-groove fasteners. These sockets are for hand-driven use only.
Drive Size | Overall Lg. | OD | For Fastener Type | For Screw Size (Head Dia.) | Material | Each | |
1/4" Square Drive | |||||||
---|---|---|---|---|---|---|---|
No. 4 | 1" | 31/64" | Screws | No. 4 Standard (0.13") No. 6 Countersunk (0.268") | Black-Oxide Steel | 0000000 | 000000 |
Tri-Groove Socket Sets
Grip the indentations around the outside of tri-groove fasteners.
No. of Pieces | Components Included | Includes | Finish | Each | |
1/4" Square Drive—Steel | |||||
---|---|---|---|---|---|
4 | 3 Sockets 1 Drive Tool | Standard Socket: No. 4 (For No. 4 Standard Screws and No. 6 Countersunk Screws) Standard Socket: No. 6 (For Nos. 6 and 8 Standard Screws and Nos. 8 and 10 Countersunk Screws) Standard Socket: No. 10 (For Nos. 10, 12, and 1/4" Standard Screws; 1/4" Countersunk Screws; and Nos. 6 and 8 Nuts) 8" Long Socket Screwdiver Handle | Black Oxide | 0000000 | 000000 |