The standard for high-strength fastening.

18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these pan head screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. The extra-wide truss head distributes holding pressure to reduce the likelihood of crushing thin material.

A zinc plating provides mild corrosion resistance.

Made from brass, these screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

A zinc plating provides mild corrosion resistance.

A zinc plating provides mild corrosion resistance.

Stainless steel screws have excellent corrosion resistance in most environments.

Made from stainless steel, these screws have good chemical resistance and may be mildly magnetic. All have a washer with sharp external teeth that dig into surfaces for maximum holding power and vibration resistance. Also known as Sems screws, the washer rotates freely but is permanently attached.

These 18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant Torx drive (also known as a pin-in Torx drive) makes them difficult to remove without special tools.

About half as strong as medium-strength steel screws, these screws can be used for light duty fastening applications, such as securing access panels.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water.

These screws have a decorative, domed head that sits above the surface when installed.

A zinc plating provides mild corrosion resistance.

Made of 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic.

These steel screws have corrosion-resistant finishes.

Known for their strength, these alloy steel screws are coated to provide corrosion resistance in wet environments.

These steel screws have a head encapsulated by 18-8 stainless steel.

These steel screws cut threads in drilled holes as they’re turned, so they require less driving torque and cause less stress on your material than thread forming screws.

These steel screws are zinc plated to resist corrosion in wet environments.

These steel screws are zinc plated to resist corrosion in wet environments.

Commonly used with door hinge hardware, these screws cut threads in material such as aluminum and brass.

These binding barrels and screws have good chemical resistance.

About half the strength of medium-strength steel threaded rods, use these for light duty hanging, mounting, and fastening.

More corrosion resistant than 18-8 and 410 stainless steel threaded rods, these 316 stainless steel rods have excellent resistance to chemicals and salt water.