Choose these screws for their adherence to strict military standards for material and construction.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Bronze screws are about 40% stronger than brass screws and provide more corrosion resistance to salt water, gases, and sewage. They are nonmagnetic and electrically conductive.

Nearly as strong as steel, these stainless steel screws won’t rust in outdoor, washdown, and other corrosive environments. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

With a head one and a half times taller than a standard socket head, these screws are easier to install in deep counterbored holes and other hard-to-reach places.

For use where sideways forces are a concern, these screws have a precisely measured unthreaded portion (grip) for a strong hold. Their flanged head distributes pressure where the screw meets the surface, so you don't need a washer.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are nearly two and a half times stronger than stainless steel thread-locking screws. They have a thread locker to prevent loosening from vibration.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are more than twice as strong as stainless steel wire-lockable screws. These resist vibration better than any other socket head screw.

Seal out contaminants and prevent leaks—a rubber O-ring under the head prevents leaks and seals out contaminants.

The nylon patch bonded to the threads of these socket head screws adds friction to keep vibration from loosening them, while their O-ring prevents leaks and seals out contaminants.

The nonmarring brass tip is electrically conductive and harder than nylon, but soft enough to conform to most surfaces and reduce damage from metal-on-metal contact.

More corrosion resistant than 18-8 stainless steel screws, these button head screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Brass button head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

More corrosion resistant than 18-8 stainless steel screws, these pan head screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Nylon pan head screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Stainless steel screws have excellent corrosion resistance in most environments.

These pan head screws are zinc plated for corrosion resistance in wet environments.

These screws have good chemical resistance.

These screws have good chemical resistance.

Stainless steel screws have excellent corrosion resistance in most environments.

Made from alloy steel, these screws are three times stronger than standard steel button head Torx screws. A Torx-Plus drive has more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer. Screws may be mildly magnetic.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

The extra-wide head distributes holding pressure to reduce the likelihood of crushing thin materials.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

These screws come with a traceable lot number and a physical and chemical test report. Use them for high-strength fastening.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening. For use in high-strength fastening applications.

Choose these screws for their adherence to strict military standards for material and construction. Use them to fasten most machinery and equipment.

About half as strong as medium-strength steel screws, these screws can be used for light duty fastening applications, such as securing access panels.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Tighten these screws by turning them to the left; once fastened, they prevent counterclockwise-moving parts from loosening. Made from 18-8 stainless steel, these screws have good chemical resistance.

Choose these screws for their excellent corrosion resistance—comparable to 316 stainless steel—and the strength of steel. Use them for high-strength fastening in chemical and marine applications.

Plastic screws are chemical and oil resistant, nonconductive, and lightweight.

Aluminum screws are one-third the weight of steel and have good corrosion resistance.

Bronze screws are 30% stronger than brass screws and provide more corrosion resistance to salt water, gases, and sewage. They are nonmagnetic and electrically conductive.

More corrosion resistant than 316 stainless steel, nickel alloy screws have excellent resistance to salt water and some acids.

Made from 316 stainless steel, these Grade B8M screws are more corrosion resistant than 18-8 stainless steel screws and have excellent resistance to chemicals and salt water. Screws meet ASTM A193 regulations, so they can be used in high-pressure and high-temperature applications. Also known as pressure bolts.

Made from Grade 5 steel, these screws are suitable for fastening most machinery and equipment. The flange distributes pressure where the screw meets the surface, eliminating the need for a washer.

Made from 18-8 stainless steel, these screws have good chemical resistance. A flange under the head distributes pressure over the surface, eliminating the need for a washer.

These screws are chemical and oil resistant, nonconductive, and lightweight. The flange eliminates the need for a washer, distributing pressure where the screw meets the surface.

About 20% stronger than medium-strength steel screws, these Grade 8 steel screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. Serrations under the flange provide mild vibration resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. A serrated flange provides mild vibration resistance.

Made from 18-8 stainless steel, these screws have the best chemical and corrosion resistance of our wire-lockable screws. Wire these screws together for more vibration resistance than other types of hex head screws.

Made from 18-8 stainless steel, these screws have good chemical resistance. They have a thread locker to prevent loosening from vibration.

Choose these screws for their adherence to strict military standards for material and construction.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water.

These steel screws have a zinc plating for mild corrosion resistance.

These screws have a decorative, domed head that sits above the surface when installed.

Lower strength than alloy steel, use these screws for light duty fastening.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Polycarbonate screws resist breaking in high impact applications better than other plastic screws. All are chemical and oil resistant, nonconductive, and lightweight.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Prevent unwanted removal, leaks, and contamination with these sealing Torx screws.

Stainless steel screws have excellent corrosion resistance in most environments.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

These steel screws are zinc plated to resist corrosion in wet environments.

Also known as Tap-Flex screws, these are made from hardened steel to penetrate hard material. They have a five-edged shank that presses tightly against the material to form threads and resist loosening.

With threads the same diameter as the shoulder, these inch-sized screws can handle heavy loads. They’re comparable to Grade 8 steel.

Made from 18-8 stainless steel, these inch-sized shoulder screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water. These screws have inch thread sizes.

These shoulder screws are chemical resistant, nonconductive, and lightweight.

These have a head height about one-third the head height of a standard shoulder screw.

Stainless steel shoulder screws have excellent corrosion resistance in most environments.

These shoulder screws have good chemical resistance.

These shoulder screws are angled under the head to sit flush in countersunk holes.