The standard for high-strength fastening.

A Torx-Plus drive has more points of contact than a hex drive, allowing you to tighten these screws with less slippage or damage to the recess.

Choose these screws for their adherence to strict military standards for material and construction. Screws are 18-8 stainless steel for good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Our most corrosion-resistant metal screws, titanium screws withstand salt water, acids, and chemicals. They have a high strength-to-weight ratio and are about 40% lighter than steel screws.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

These screws have good chemical resistance. A thread locker bonded to the threads prevents loosening from vibration.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are nearly two and a half times stronger than stainless steel thread-locking screws. They have a thread locker to prevent loosening from vibration.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are more than twice as strong as stainless steel wire-lockable screws. These resist vibration better than any other socket head screw.

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic.

18-8 stainless steel pan head screws have good chemical resistance and may be mildly magnetic.

Choose these screws for their adherence to strict military standards for material and construction.

Choose these screws for their adherence to strict military standards for material and construction.

Reliable in harsh environments up to 500° F, PEEK screws withstand acids, bases, and salt solutions. They are chemical and oil resistant, nonconductive, and lightweight.

Brass pan head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. The extra-wide truss head distributes holding pressure to reduce the likelihood of crushing thin material.

Stainless steel screws have excellent corrosion resistance in most environments.

18-8 stainless steel pan head screws have good chemical resistance and may be mildly magnetic.

These pan head screws are zinc plated for corrosion resistance in wet environments.

PTFE screws withstand harsh chemicals and temperatures from -100° F to 500° F. They are nonconductive, lightweight, and resist wear due to their slippery surface.

Made from brass, these screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water.

Nylon screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

These screws have good chemical resistance.

A zinc plating provides mild corrosion resistance.

Stainless steel screws have excellent corrosion resistance in most environments.

Brass screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. Torx and Torx-Plus drives have more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

A286 stainless steel screws have comparable strength to alloy steel with the corrosion and chemical resistance of 18-8 stainless steel. They have a Torx drive that has more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

These screws have a Torx or Torx-Plus drive for more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

Made from stainless steel, these screws are chemical resistant and may be mildly magnetic.

18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. The flange distributes pressure across a wide surface, eliminating the need for a separate washer.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. The flange is wider and thicker than our other flanged screws, so they distribute pressure the best.

These stainless steel screws have good chemical resistance and may be mildly magnetic. The washer has sharp internal teeth that dig into surfaces to resist large amounts of vibration while the smooth outside edge provides a finished look. Also known as Sems screws, the washer rotates freely but is permanently attached.

Made from stainless steel, these screws have good chemical resistance and may be mildly magnetic. All have a washer with sharp external teeth that dig into surfaces for maximum holding power and vibration resistance. Also known as Sems screws, the washer rotates freely but is permanently attached.

Made from stainless steel, these screws have good chemical resistance and may be mildly magnetic. A curved washer protects delicate surfaces while providing constant tension. Also known as Square Cone Sems screws, the washer rotates freely but is permanently attached.

When compressed, the split lock washer flattens to add tension and prevent loosening from small amounts of vibration. Also known as Sems screws, the washer rotates freely but is permanently attached.

The flat washer distributes holding pressure and protects delicate surfaces from damage while the split lock washer adds tension to prevent loosening from small amounts of vibration.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

The epoxy adhesive on the threads provides twice the holding power of standard thread-locking screws, but requires time to harden.

These 18-8 stainless steel button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant Torx drive (also known as a pin-in Torx drive) makes them difficult to remove without special tools.

A tamper-resistant drilled spanner drive makes these screws difficult to remove without special tools. They're 18-8 stainless steel for good chemical resistance and may be mildly magnetic.

Made from alloy steel, these screws are nearly twice as strong as stainless steel button head screws.

A rubber O-ring prevents leaks and seals out contaminants. Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Ceramic screws won't melt, rust, seize, or become brittle—even at extreme temperatures. They are nonconductive and highly resistant to corrosive gases.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Choose these screws for their adherence to strict military standards for material and construction.

These screws have good chemical resistance and may be mildly magnetic.

Choose these screws for their adherence to strict military standards for material and construction.

Choose these screws for their adherence to strict military standards for material and construction.

Aluminum screws are lightweight and have good corrosion resistance.

Made from alloy steel, these screws are twice as strong as standard steel Torx flat head screws.

A286 stainless steel screws have comparable strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

A zinc plating provides mild corrosion resistance.

Made of 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic.