Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

Nearly as strong as steel, these stainless steel screws won’t rust in outdoor, washdown, and other corrosive environments. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

The nylon patch bonded to the threads of these socket head screws adds friction to keep vibration from loosening them, while their O-ring prevents leaks and seals out contaminants.

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws.

These metric 316 stainless steel screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They may be mildly magnetic.

Made to Japanese Industrial Standards, these screws have narrower and shorter heads than standard Phillips pan head screws.

These metric PEEK screws are reliable in harsh environments up to 500° F and withstand acids, bases, and salt solutions. All are chemical and oil resistant, nonconductive, and lightweight.

Made from 18-8 stainless steel, these metric screws have good chemical resistance and may be mildly magnetic. The extra-wide truss head distributes holding pressure to reduce the likelihood of crushing thin material.

Install these metric pan head screws for a low-profile, finished look—no countersink required.

More corrosion resistant than steel, and almost as strong, these 18-8 stainless steel screws have a narrower head than pan head screws to fit into tight spaces. They’re often used in electrical panels and next to flanges and raised surfaces in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals.

With a narrower head than pan head screws, these cheese head screws fit in tight spaces, such as in electrical panels and next to flanges and raised surfaces.

The Torx or Torx-Plus drive on these metric screws have more points of contact than other drives, allowing you to tighten them without damaging the recess.

These metric screws have a Torx drive for more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

These metric screws have a nylon patch bonded to the threads that adds friction to prevent loosening from vibration. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water.

These screws meet Japanese Industrial Standards.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These metric screws have a triangular shank that presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper.

Use these screws in thin materials; they have a shorter threaded portion than our standard shoulder screws. They’re comparable in strength to Grade 8 steel.

For metric thread sizes with excellent resistance to chemicals and salt water, choose these 316 stainless steel shoulder screws.

These metric 316 stainless steel shoulder screws are more corrosion resistant than 18-8 stainless steel shoulder screws. They also have excellent resistance to chemicals and salt water.

These screws have a head height about one-third the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.

These metric set screws have good chemical resistance.

Made from alloy steel, these metric set screws have a thin edge that digs into hard surfaces for a secure hold. They have a nylon locking patch that grips threads to resist loosening.

These metric 18-8 stainless steel set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric set screws have a tip that makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Strong and durable, these alloy steel set screws hold objects tightly against flat surfaces.

Made of chemical-resistant 18-8 stainless steel, these metric screws have an extra-soft nylon tip that reduces the noise, vibration, and damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

Available in metric sizes, these 18-8 stainless steel threaded rods have good chemical resistance.

These metric brass threaded rods are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.