Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Choose these metric screws for fastening most machinery and equipment. They are twice as strong as low-strength steel screws.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Designed for construction and exterior building applications, these metric screws are often used to join I-beams and scaffolding. Their partial threading leaves an unthreaded portion that is strong enough to stand up to the sideways forces of joints.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These screws have metric thread sizes. They are 18-8 stainless steel for good chemical resistance.

For metric thread sizes with excellent resistance to chemicals and salt water, choose these 316 stainless steel shoulder screws.

These metric set screws have good chemical resistance.

These metric set screws have a tip that makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric screws have a square head, so you can turn them by hand or use a wrench for more torque. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

These metric Grade B7 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

These metric threaded rods are about half the strength of medium-strength steel threaded rods for light duty hanging, mounting, and fastening.

These metric threaded rods tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. About half the strength of medium-strength steel threaded rods, use them for light duty hanging, mounting, and fastening.

Class 12.9 rods are about 20% stronger than Class 10.9 threaded rods and are for use in heavy machinery.

These metric 316 stainless steel threaded rods are more corrosion resistant than 18-8 and 410 stainless steel threaded rods and have excellent resistance to chemicals and salt water.

These spring plungers have a nose that is about three-times longer than standard long hex-nose spring plungers.

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Install these threaded collars on a metric lead screw to separate and position components, or use them as an end stop to limit travel.

Designed for use with right-hand, internally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.

Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension.

For mounting items to your machine table, these kits contain the full system of necessary components.

Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.

Create your own lifting eye by adding an eye nut to a stud or bolt.