Tip Style Tip Style |
|---|
|
For Use On For Use On |
|---|
Handle Material Handle Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Tip Material Tip Material | Show |
|---|
|
Stroke Speed Control Stroke Speed Control |
|---|
|
Plug Type Plug Type |
|---|
|
Specifications Met Specifications Met |
|---|
Electric Engravers with Carbide Tip
Use the knob on the side to adjust speed and control the depth of your marks.
| Strokes per Minute | Current | Voltage | Weight, lbs. | Tip Style | For Use On | Plug Type | Cord Lg., ft. | Specifications Met | Includes | Each | |
| 7,200 | 0.2A | 120V AC | 0.8 | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Two Prong | 5 | UL Listed | Letter and Number Stencil Set: One each of 0-9, A-Z, Forward Slash (/), and Dash (-) | 000000 | 000000 |
High-Strength Electric Engravers with Carbide Tip
This engraver has a wider range of depth settings and produces less vibration for smoother writing. Use the wheel on the side to adjust speed and control the depth of your marks.
| Strokes per Minute | Current | Voltage | Weight, lbs. | Tip Style | For Use On | Plug Type | Cord Lg., ft. | Each | |
| 7,200 | 1A | 120V AC | 0.9 | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Three Prong | 7 | 000000 | 000000 |
Lightweight Electric Engravers with
Steel, Carbide, and Diamond Tips
Made of aluminum, this pen-shaped engraver is lightweight to reduce writing strain. It has two speed settings for controlling the depth of your marks.
Carbide tip is for general purpose engraving.
Steel tip is for engraving plastic.
Diamond tip allows you to engrave extra-hard materials such as stone, ceramic, and hard metal.
| Strokes per Minute | Current | Voltage | Weight, lbs. | Tip Style | Carbide For Use On | Steel For Use On | Diamond For Use On | Plug Type | Cord Lg., ft. | Each | |
| 7,200 | 0.1A | 120V AC | 0.6 | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Acrylic Plastic, Rubber | Ceramic, Glass, Phenolic Plastic, Steel, Stone | Two Prong | 6 | 0000000 | 000000 |
Electric Engravers with Carbide and Diamond Tips
Use the knob on the side to adjust speed and control the depth of your marks.
Carbide tip is for general purpose engraving.
Diamond tip allows you to engrave extra-hard materials such as stone, ceramic, and hard metal.
| Strokes per Minute | Current | Voltage | Weight, lbs. | Tip Style | Carbide For Use On | Diamond For Use On | Plug Type | Cord Lg., ft. | Specifications Met | Includes | Each | |
| 7,200 | 0.2A | 120V AC | 0.8 | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Ceramic, Glass, Phenolic Plastic, Steel, Stone | Two Prong | 5 | UL Listed | Letter and Number Stencil Set: One each of 0-9, A-Z, Forward Slash (/), and Dash (-) | 000000 | 000000 |
High-Strength Electric Engravers
with Carbide and Diamond Tips
This engraver has a wider range of depth settings and produces less vibration for smoother writing. Use the wheel on the side to adjust speed and control the depth of your marks.
Carbide tip is for general purpose engraving.
Diamond tip allows you to engrave extra-hard materials such as stone, ceramic, and hard metal.
| Strokes per Minute | Current | Voltage | Weight, lbs. | Tip Style | Carbide For Use On | Diamond For Use On | Plug Type | Cord Lg., ft. | Each | |
| 7,200 | 1A | 120V AC | 0.9 | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Ceramic, Glass, Phenolic Plastic, Steel, Stone | Three Prong | 7 | 0000000 | 0000000 |
Air-Powered Engravers with Carbide Tip
Connect these engravers to a compressed air line. Higher strokes per minute means they cut more smoothly than electric engravers.
Engraver with adjustable speed allows you to modify the airflow so you can select the power to best suit your application.
Engravers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hose | Replacement Cutting Tips | |||||||||||||
| Stroke Speed Control | Strokes per Minute | Flow Rate | ID | Lg. | Gender | Pipe Size | Thread Type | Weight, lbs. | Tip Style | For Use On | Each | Each | ||
| Fixed | 30,000 | 1.1 cfm @ 90 psi | 1/8" | 6 ft. | Female | 1/4 | NPT | 0.3 | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 0000000 | 0000000 | 000000 |
| Adjustable | 13,500 | 1.1 cfm @ 90 psi | 3/16" | 8 ft. | Male | 1/4 | NPT | 0.3 | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 000000 | 000000 | 00 |
Tip | ||||
|---|---|---|---|---|
| Material | Style | For Use On | Each | |
| Carbide | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 000000 |
| Steel | Flat | Acrylic Plastic, Rubber | 0000000 | 00000 |
| Steel | Angled Chisel | Acrylic Plastic, Rubber | 0000000 | 00000 |
| Steel | Flat Chisel | Acrylic Plastic, Rubber | 0000000 | 00000 |
Air-Powered Engraver Kits with Steel and Carbide Tips
Includes an engraver, four interchangeable tips, a tip holder, an air filter, and a portable case. Connect these engravers to a compressed air line. Higher strokes per minute means they cut more smoothly than electric engravers.
Angled chisel tip is used for cleaning weld beads. Requires tip holder for operation.
Flat tip can be ground to a shape that suits your application. Requires tip holder for operation.
Flat chisel tip works well for scaling and deburring. Requires tip holder for operation.
Hose | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Speed Control | Strokes per Minute | Flow Rate | ID | Lg., ft. | Gender | Thread Type | Pipe Size | Weight, lbs. | Carbide Tip Style | Steel Tip Style | Carbide For Use On | Steel For Use On | Includes | Each | |
| Adjustable | 13,500 | 1.1 cfm @ 90 psi | 3/16" | 8 | Male | NPT | 1/4 | 0.3 | Point | Angled Chisel, Flat, Flat Chisel | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | Acrylic Plastic, Rubber | Air Filter, Carrying Case, Tip Holder | 0000000 | 0000000 |
Tip | ||||
|---|---|---|---|---|
| Material | Style | For Use On | Each | |
| Carbide | Point | Acrylic Plastic, Aluminum, Black Oxide, Brass, Bronze, Copper, Iron, Lead, Nickel, Rubber, Stainless Steel, Tin, Wood | 0000000 | 000000 |
| Steel | Flat | Acrylic Plastic, Rubber | 0000000 | 00000 |
| Steel | Angled Chisel | Acrylic Plastic, Rubber | 0000000 | 00000 |
| Steel | Flat Chisel | Acrylic Plastic, Rubber | 0000000 | 00000 |
Reducing Engravers
Make quick, precise marks of varying sizes. As you trace stencils with one end of the engraving arm, the other end engraves them into your surface. Also known as pantographs, these engravers create reduced and one-to-one character sizes to fit your workpiece. The rotating cutter spindle allows for detailed work and smooth lines.
Use the carbide tip to rout plastic so the core color is revealed.
Engraver comes with a brass letter and number stencil set that can be used to create 25 different character heights. Includes 0-9, A-Z, 30 spacers, and a punctuation set of &, period, comma, dash, apostrophe, quotation marks, colon, and semicolon.
Max. Engraving | Tracing Platform | Overall | Tip | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Speed Control | Strokes per Minute | Voltage | Wd. | Lg. | Wd. | Lg. | For Max. Material Thick. | Engraving Ratio | Ht. | Wd. | Dp. | Wd. (Material) | Style | Carbide For Use On | Diamond For Use On | Plug Type | Each | |
| Fixed | 18,000 | 120V AC | 5" | 9 1/2" | 6" | 16" | 1 3/4" | 1:1 to 7:1 | 13" | 16" | 18" | 0.02" (Carbide) 0.03" (Carbide) 0.02" (Diamond) | Point | Acrylic Plastic, Rubber, Wood | Ceramic, Glass, Phenolic Plastic, Steel, Stone | Three Prong | 00000000 | 000000000 |
| Material | Includes | Each | |
| Brass | 30 each of Blank ( );One each of 0-9 and A-Z;One each of Ampersand (&), Apostrophe ('), Colon (:), Comma (,), Dash (-), Period (.), Quotation Marks ("), and Semicolon (;) | 00000000 | 0000000 |
Arc Engravers
Melt surface material and create marks without vibration. Write with the metal tip like a pencil. A knob allows you to control the depth and width of the marks. Welding goggles are recommended for use with these machines.
Carbide tips resist wear better than the copper tip.
Engravers | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Output | Overall | Replacement Stylus Cords | |||||||||||||||||
| No. of Heat Levels | Power | Voltage | Input Voltage | Ht. | Wd. | Dp. | Tip Style | Carbide Tip Size | Copper Tip Size | For Use On | Stylus Cord Lg., ft. | Handle Material | Plug Type | Cord Lg., ft. | Includes | Each | Each | ||
| 12 | 1,500W | 2.7V | 120V AC | 8" | 6" | 8" | Point | Fine, Medium, Bold | Medium | Black Oxide, Iron, Stainless Steel, Steel | 3 1/2 | Cork | Three Prong | 6 | Grounding Cord with Clips, Transformer | 000000 | 0000000 | 0000000 | 0000000 |
| 15 | 1,500W | 2.7V | 120V AC | 8" | 6" | 8" | Point | Fine, Medium, Bold | Medium | Black Oxide, Iron, Stainless Steel, Steel | 3 1/2 | Cork | Three Prong | 6 | Grounding Cord with Clips, Transformer | 000000 | 000000 | 0000000 | 000000 |
| Replacement Handle | 0000000 | Each | 000000 |
Tip | ||||
|---|---|---|---|---|
| Size | Style | For Use On | Each | |
Carbide | ||||
| Fine | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 000000 |
| Medium | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |
| Bold | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |
Copper | ||||
| Medium | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |
| Bold | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |
High-Strength Arc Engravers
More voltage allows you to engrave on heavy scale and rusted metal. Melt surface material and create marks without vibration. Write with the metal tip like a pencil. A knob allows you to control the depth and width of the marks. Welding goggles are recommended for use with this machine.
Carbide tips resist wear better than the copper tip.
Output | Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Heat Levels | Power | Voltage | Input Voltage | Ht. | Wd. | Dp. | Tip Style | Carbide Tip Size | Copper Tip Size | For Use On | Stylus Cord Lg., ft. | Handle Material | Plug Type | Cord Lg., ft. | Includes | Each | |
| 30 | 2,500W | 4.3V | 120V AC | 10" | 8" | 10" | Point | Fine, Medium, Bold | Medium, Bold | Black Oxide, Iron, Stainless Steel, Steel | 5 | Cork | Three Prong | 6 | Grounding Cord with Clips, Transformer | 0000000 | 000000000 |
Tip | ||||
|---|---|---|---|---|
| Size | Style | For Use On | Each | |
Carbide | ||||
| Fine | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 000000 |
| Medium | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |
| Bold | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |
Copper | ||||
| Medium | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |
| Bold | Point | Black Oxide, Iron, Stainless Steel, Steel | 0000000 | 00000 |