For Drill Bit Shank Type For Drill Bit Shank Type |
---|
![]() | SDS Plus |
![]() | Tapered Round |
System of Measurement System of Measurement |
---|
|
Size Size |
---|

|
|
|
Maximum Drilling Depth Maximum Drilling Depth |
---|
Overall Length Overall Length |
---|
Point Style Point Style |
---|
![]() |
Standard |
![]() |
Multi-Point |
Bit Style Bit Style |
---|
![]() | ![]() |
Spiral Flute | Straight Flute |
![]() | |
Hollow |
For Drilling Type For Drilling Type |
---|
|
Material Material |
---|
|
Individual/Set Individual/Set |
---|
|
Flute Direction Flute Direction |
---|
![]() |
Right Hand |
Decimal Size Equivalent Decimal Size Equivalent |
---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Finish Finish |
---|
|
Specifications Met Specifications Met |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
For Use With For Use With |
---|
|
Drill Bit Decimal Size Equivalents
More
About Drill Bits
More
About Masonry Drill Bits
More
SDS-Plus-Shank Masonry Drill Bits for Rotary Hammers



The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These bits cannot be used with SDS-Max-drive rotary hammers. Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also called percussion or impact bits.
Multi-point drill bits have five carbide points on the tip, which provide longer life and reduce vibration for drilling smoother, rounder holes than standard-point masonry drill bits.
For technical drawings and 3-D models, click on a part number.
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Specifications Met | For Use On | Each | |
Inch—Standard Point | ||||||||
---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | ||||||||
5/32" | 0.1563" | 4 5/8" | 2" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/32" | 0.1563" | 8 5/8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/16" | 0.1875" | 4 3/8" | 2" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
3/16" | 0.1875" | 6 3/8" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
3/16" | 0.1875" | 8 5/8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/16" | 0.1875" | 10 5/8" | 8" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/16" | 0.1875" | 12 5/8" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/16" | 0.1875" | 14 5/8" | 12" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/32" | 0.2188" | 4 3/4" | 2.5" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
7/32" | 0.2188" | 6 5/8" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
7/32" | 0.2188" | 8 5/8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/32" | 0.2188" | 10 1/4" | 8" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/32" | 0.2188" | 14 5/8" | 12" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/4" | 0.25" | 4 3/8" | 2" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
1/4" | 0.25" | 6 3/8" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
1/4" | 0.25" | 8 5/8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
1/4" | 0.25" | 11 5/8" | 9" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/4" | 0.25" | 12 1/4" | 9.63" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/4" | 0.25" | 14 5/8" | 12" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/4" | 0.25" | 20 5/8" | 18" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/4" | 0.25" | 26" | 24" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
9/32" | 0.2813" | 8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
5/16" | 0.3125" | 6 5/8" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
5/16" | 0.3125" | 9 3/4" | 7.5" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/16" | 0.3125" | 12 5/8" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/8" | 0.375" | 6 5/8" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
3/8" | 0.375" | 10 5/8" | 8" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/8" | 0.375" | 12 5/8" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/8" | 0.375" | 20 5/8" | 18" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/8" | 0.375" | 24" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/8" | 0.375" | 36" | 34" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/16" | 0.4375" | 6 5/8" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/16" | 0.4375" | 12 5/8" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/16" | 0.4375" | 18 5/8" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/2" | 0.5" | 6 5/8" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 0000 |
1/2" | 0.5" | 10 5/8" | 8" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/2" | 0.5" | 12 5/8" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/2" | 0.5" | 18 5/8" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/2" | 0.5" | 24" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1/2" | 0.5" | 38" | 36" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
9/16" | 0.5625" | 6 3/4" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
9/16" | 0.5625" | 10 1/8" | 7.88" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
9/16" | 0.5625" | 12 3/4" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
9/16" | 0.5625" | 18 3/4" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 6 3/4" | 4" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 9 3/4" | 7" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 12 3/4" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 18 3/4" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 24" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 36" | 34" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
11/16" | 0.6875" | 12 3/4" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/4" | 0.75" | 9 3/4" | 7" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/4" | 0.75" | 12 3/4" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/4" | 0.75" | 18 3/4" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/4" | 0.75" | 24" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
13/16" | 0.8125" | 12 3/4" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
27/32" | 0.8438" | 8 3/4" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/8" | 0.875" | 9 3/4" | 7" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/8" | 0.875" | 12 3/4" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/8" | 0.875" | 18 3/4" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 10 3/4" | 8" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 13 1/8" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 18 3/4" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 25" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 30" | 28" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1 1/8" | 1.125" | 12 3/4" | 10" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1 1/8" | 1.125" | 18 3/4" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
Inch—Multi-Point | ||||||||
Uncoated Carbide-Tipped Steel | ||||||||
5/8" | 0.625" | 8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 14" | 12" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 18" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 25" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
5/8" | 0.625" | 38" | 36" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
3/4" | 0.75" | 8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/4" | 0.75" | 14" | 12" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/4" | 0.75" | 18" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
3/4" | 0.75" | 25" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
3/4" | 0.75" | 38" | 36" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
7/8" | 0.875" | 8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/8" | 0.875" | 14" | 12" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/8" | 0.875" | 18" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
7/8" | 0.875" | 38" | 36" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
1" | 1" | 8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 18" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 25" | 22" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
1" | 1" | 38" | 36" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
1 1/8" | 1.125" | 8" | 6" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
1 1/8" | 1.125" | 18" | 16" | SDS Plus | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
SDS-Plus-Shank Masonry Drill Bits for Tapping Screw Installation


Each bit is precisely sized to match the tolerances necessary to achieve maximum holding strength from tapping screws. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These bits cannot be used with SDS-Max-drive rotary hammers.
For technical drawings and 3-D models, click on a part number.
For Screw Size | Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | For Use On | Each | |
Inch | |||||||||
---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | |||||||||
3/16" | 5/32" | 0.1563" | 7" | 4" | SDS Plus | Standard | Masonry, Concrete | 000000 | 000000 |
3/16" | 3/16" | 0.1875" | 4" | 2" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
3/16" | 3/16" | 0.1875" | 8 1/2" | 6 1/2" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/16" | 3/16" | 0.1875" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/16" | 3/16" | 0.1875" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/16" | 3/16" | 0.1875" | 14" | 12" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
7/32" | 7/32" | 0.2188" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
7/32" | 7/32" | 0.2188" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1/4" | 3/16" | 0.1875" | 6 1/2" | 3 1/2" | SDS Plus | Standard | Masonry, Concrete | 000000000 | 0000 |
1/4" | 1/4" | 0.25" | 4" | 2" | SDS Plus | Standard | Masonry, Concrete | 000000000 | 0000 |
1/4" | 1/4" | 0.25" | 8 1/2" | 6 1/2" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
1/4" | 1/4" | 0.25" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1/4" | 1/4" | 0.25" | 14" | 12" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
5/16" | 1/4" | 0.25" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 000000000 | 00000 |
5/16" | 5/16" | 0.3125" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
5/16" | 5/16" | 0.3125" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/8" | 3/8" | 0.375" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 0000 |
3/8" | 3/8" | 0.375" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/8" | 3/8" | 0.375" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/8" | 3/8" | 0.375" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/8" | 3/8" | 0.375" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
7/16" | 7/16" | 0.4375" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
7/16" | 7/16" | 0.4375" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
7/16" | 7/16" | 0.4375" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1/2" | 1/2" | 0.5" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1/2" | 1/2" | 0.5" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1/2" | 1/2" | 0.5" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1/2" | 1/2" | 0.5" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1/2" | 1/2" | 0.5" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
9/16" | 9/16" | 0.5625" | 6" | 4" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
9/16" | 9/16" | 0.5625" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
9/16" | 9/16" | 0.5625" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
5/8" | 5/8" | 0.625" | 8" | 6" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
5/8" | 5/8" | 0.625" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
5/8" | 5/8" | 0.625" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
5/8" | 5/8" | 0.625" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/4" | 3/4" | 0.75" | 8" | 6" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/4" | 3/4" | 0.75" | 12" | 10" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/4" | 3/4" | 0.75" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
3/4" | 3/4" | 0.75" | 24" | 22" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
7/8" | 7/8" | 0.875" | 8" | 6" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
7/8" | 7/8" | 0.875" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 1" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1" | 1" | 1" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1 1/8" | 1 1/8" | 1.125" | 10" | 8" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
1 1/8" | 1 1/8" | 1.125" | 18" | 16" | SDS Plus | Standard | Masonry, Concrete | 0000000 | 00000 |
SDS-Plus-Shank Masonry Drill Bits for Rebar-Cutting


When you encounter rebar, stop drilling and mount one of these bits in your tool. Drill through the rebar, and then resume drilling with your masonry drill bit. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers set to rotary-only mode. These bits cannot be used with SDS-Max-drive rotary hammers. Do not use in hammering applications.
For technical drawings and 3-D models, click on a part number.
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | Specifications Met | For Use On | Each | |
Inch | |||||||||
---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | |||||||||
3/8" | 0.375" | 8" | 6" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 000000 |
3/8" | 0.375" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
7/16" | 0.4375" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
1/2" | 0.5" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
1/2" | 0.5" | 18" | 16" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
9/16" | 0.5625" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
5/8" | 0.625" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
5/8" | 0.625" | 18" | 16" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
11/16" | 0.6875" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 18" | 16" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
3/4" | 0.75" | 24" | 22" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 000000 |
13/16" | 0.8125" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
7/8" | 0.875" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
1" | 1" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 00000 |
1 1/8" | 1.125" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 000000 |
1 1/4" | 1.25" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 000000 |
1 3/8" | 1.375" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 000000 |
1 1/2" | 1.5" | 12" | 10" | SDS Plus | Standard | ANSI B212.15 | Rebar | 00000000 | 000000 |
SDS-Plus-Shank Hollow Masonry Drill Bits for Dust Containment


When connected to a vacuum, these hollow bits can suck up concrete dust while drilling to help meet OSHA standards for silica dust exposure. They can also be used to clean out holes for installing adhesive anchors. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. They cannot be used with SDS-Max-drive rotary hammers.
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | For Vacuum Hose ID | For Use On | Each | |
Inch | |||||||||
---|---|---|---|---|---|---|---|---|---|
Titanium-Nitride (TiN) Coated Carbide-Tipped Steel | |||||||||
7/16" | 0.4375" | 13" | 7 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
1/2" | 0.5" | 13" | 7 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 00000 |
9/16" | 0.5625" | 15" | 10" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
5/8" | 0.625" | 15" | 10" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
11/16" | 0.6875" | 18" | 12 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
3/4" | 0.75" | 18" | 12 1/2" | SDS Plus | Standard | 1 3/8" | Masonry, Concrete | 000000 | 000000 |
Masonry Drill Bits for Anchor Installation


A built-in stop ensures repeatable drilling depths for installing drop-in anchors. The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These bits cannot be used with SDS-Max-drive rotary hammers.
For technical drawings and 3-D models, click on a part number.
Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Shank Type | Point Style | Specifications Met | For Use On | Each | |
Inch | |||||||||
---|---|---|---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | |||||||||
1/4" | 0.25" | 4 7/8" | 13/16" | SDS Plus | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 000000 |
3/8" | 0.375" | 4 3/4" | 11/16" | SDS Plus | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
3/8" | 0.375" | 5 1/8" | 1 1/16" | SDS Plus | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
1/2" | 0.5" | 4 7/8" | 13/16" | SDS Plus | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
1/2" | 0.5" | 5 3/4" | 1 11/16" | SDS Plus | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
5/8" | 0.625" | 5 1/4" | 1 3/16" | SDS Plus | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
5/8" | 0.625" | 6 1/8" | 2 1/16" | SDS Plus | Standard | ANSI B212.15 | Masonry, Concrete | 000000 | 00000 |
SDS-Plus-Shank Masonry Drill Bit Sets for Rotary Hammers


Drill holes using simultaneous rotary and hammering action to break masonry material into tiny granules. These bits cannot be used with SDS-Max-drive rotary hammers. Drill holes using simultaneous rotary and hammering action. This type of bit drills faster and penetrates material with less pressure than rotary-only bits. Also called percussion or impact bits.
For technical drawings and 3-D models, click on a part number.
Number of Pieces | Drill Bit Sizes Included | Point Style | Specifications Met | For Use On | Each | |
Inch | ||||||
---|---|---|---|---|---|---|
Uncoated Carbide-Tipped Steel | ||||||
5 | 3/16"; 1/4"; 5/16"; 3/8"; 1/2" | Standard | ANSI B212.15 | Masonry, Concrete | 0000000 | 000000 |
6 | 3/16"; 1/4"; 5/16"; 3/8"; 1/2" (6 5/8" Lg.); 1/2" (10 5/8" Lg.) | Standard | ANSI B212.15 | Masonry, Concrete | 0000000 | 00000 |
Extensions for SDS-Plus-Shank Drill Bits


SDS-Plus shanks have two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These extensions have a quick-change mechanism for fast bit changes. Attach to the shank of a drill bit to extend its reach.
For technical drawings and 3-D models, click on a part number.
Bit Adapters for Rotary Hammers

Insert these adapters into your SDS-drive rotary hammer to use it with hex-shank bits (also known as insert bits).
For technical drawings and 3-D models, click on a part number.
For Bit Shank Type | For Bit Hex Shank Size | Overall Lg. | Shank Dia. | Material | Each | |
With Magnet | ||||||
---|---|---|---|---|---|---|
Hex | 1/4" | 2 7/8" | 0.393" | Stainless Steel | 0000000 | 000000 |
Drill Bit Shank Adapters for Rotary Hammers



Bit and SDS-Plus-Drive
Rotary Hammer




Adapt your rotary hammer to fit a variety of masonry drill bit shank types.