Color Color | Show |
---|
![]() | Copper |
Color Color | Hide |
---|
Maximum Temperature Maximum Temperature |
---|
|
For Use On For Use On |
---|
Reaches Full Strength Reaches Full Strength |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Clarity Clarity |
---|
|
Consistency Consistency |
---|
|
Diameter Diameter |
---|
|
Length Length |
---|
|
Environment Environment |
---|
|
For Use Outdoors For Use Outdoors |
---|
|
For Use With For Use With |
---|
|
Maximum Thickness Maximum Thickness |
---|
|
Specifications Met Specifications Met |
---|
|
Formulation Formulation |
---|
|
Create gaskets that withstand temperatures up to 600° F. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and they make it easy to form irregular-shaped gaskets.
Loctite® 5920™ is RTV (room temperature vulcanizing).
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Model Number | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Gasket Maker Sealants | ||||||||||
5920 | 2.36 | Tube | 0.24" | 60 min. | 24 | -65° to 600° | Copper | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 00000 |
Create gaskets that withstand temperatures up to 600° F. Use cartridges with a standard caulk gun for quick and easy dispensing. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. They are RTV (room temperature vulcanizing).
Manufacturer Model Number | Container Size, oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Gasket Maker Sealants | |||||||||
---|---|---|---|---|---|---|---|---|---|
5920 | 10.1 | 0.24" | 60 | 24 | -65° to 600° | Copper | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
This gasket maker combines the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement. It is used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. It is RTV (room temperature vulcanizing).
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Manufacturer Model Number | Size, oz. | Type | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Permatex Gasket Maker Sealants | ||||||||||
81878 | 3 | Tube | 0.25" | 60 | 24 | -65° to 600° | Copper | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Glass, Wood | 00000000 | 00000 |
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Specifications Met | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||
4 oz. | Stick | 3 | 24 | Putty | 16 sq. in. @ 1/4" | -40° to 250° | Copper | NSF/ANSI 61 | Drill, Sand, Saw | Brass, Bronze, Copper | 0000000 | 00000 |