Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. 3M 730 UV is good for use between dissimilar materials and in environments with wide temperature fluctuation.

Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Sealants with 1,000% elongation can be applied through running water.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics. Apply it in cold temperatures, on wet surfaces, and even through running water. The sealant is non-sagging, so it won't drip from vertical and overhead surfaces. It cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).

Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. This sealant is good for use between dissimilar materials and in environments with wide temperature fluctuation.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Caulk is non-sagging, so it won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement a sealant can sustain. Caulk is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.

Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater. They're non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.

Elongation indicates flexibility—the higher the value is, the more joint movement a sealant can sustain.

Seal roof openings around pipes, vents, and chimneys. Use the plastic form to enclose the area around the opening and secure it with the self-tapping screws and bonding sealant. Then fill the form with the self-leveling sealant.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts. Dispense adhesives in 10.1 fl. oz. cartridges with a standard caulk gun.

5570 is also known as silane modified polymer.

Bond stone and glass to drywall, treated lumber, and subfloors with these adhesives.

Non-sag adhesives won't drip from vertical and overhead surfaces.

Adhesives that cannot be sold to the regions listed are restricted by labeling and reporting requirements in Canada, and by local regulatory limits on VOCs (volatile organic compounds) in the states listed.

Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.