Filter by
For Use On
Manufacturer
Manufacturer Model Name
Container Type
Type
Consistency
Cure Type
Adhesive Type
Formulation
Begins to Harden
Peel Strength
Mixing Required
Maximum Temperature
Clarity
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Fitting Connection
REACH
RoHS
Viscosity
Approximate Linear Coverage @ Bead Diameter
Elongation
Minimum Temperature
Mix Ratio
Manufacturer Model Number
About Structural Adhesives
More
Toughened Acrylic Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
MA310 bonds dissimilar materials.
Plexus Adhesives
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| MA310 | 31500 | 1.58 | Cartridge | 15 min. | 24 hrs. | 3,000 | 15 | 1:1 | Thick Liquid (55,000 cP) | -65° to 250° | Light Yellow | Metal, Metal to Plastic, Plastic, Plastic to Composites, Plastic to Masonry, Composites, Masonry, Wood | 00000000 | 000000 |