Push down on the handle to create a seal. Also known as impulse sealers, these sealers use a timer that regulates the length of the heating cycle.

Systems include a cradle, a heat sealer, a heat gun, and a roll of film that shrinks when heated.

These sealers have a pliers-style design for sealing vacuum-formed plastic trays and blister packs.

Use the wheel to make a seal of any length or shape.

Also known as crimpers, sealers secure seals onto metal strapping.

Also known as crimpers, sealers secure seals onto plastic strapping to hold it tight.

These tools use heat to secure strapping without crimping on a seal.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Make temporary waterproof seals that peel off when no longer needed.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Make tough, flexible, oil-resistant seals.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Formulated to flow into small spaces, use these sealants between fine threads.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems.

This tape has a higher density than standard tape for a better seal between threads.

Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Seal joints and gaps in concrete.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Press this pliable rope into place to hold glass in window frames and seal leaks.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Make seals that support glass under heavy loads in equipment and buildings.

Prepare joints and surfaces to ensure proper sealant adhesion.

Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Let compressed air do the work for you when dispensing sealants from cartridges.

Power without a cord means you can take these sealant-dispensing guns wherever you need them.

Create a slippery surface that keeps sealant from smearing or widening when smoothed.

Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.

Made with flakes of 316 stainless steel, these flexible silicone coatings have excellent durability and corrosion resistance. They withstand temperatures up to 1200° F for use on boilers, stacks, piping, and similar indoor applications.

For use with steel and iron parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Use these dyes after anodizing and before sealing to add a decorative appearance.

Create your own zinc-plating system to add corrosion resistance to steel and iron parts.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

A hard waxy film protects items from abrasion. Coatings provide long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.

Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.

Able to withstand temperatures of up to 2500° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.

Also known as antifouling paint, the copper additive in these coatings prevents organic material, such as algae, barnacles, and slime from attaching to the surface. Use on boats, submerged structures, and inside tanks.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.