Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Make tough, flexible, oil-resistant seals.

The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Remaining pliable over time, these high-temperature sealants protect against leaks caused by vibration and pressure—they naturally fill voids before leaks can develop.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media.

This tape has a higher density than standard tape for a better seal between threads.

Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

The textured finish matches concrete surfaces.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Make seals that support glass under heavy loads in equipment and buildings.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

No mixing required—these potting compounds come ready to apply.

This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.

Extend the life of your paint and coatings on damage-prone metal surfaces. When scratched or worn, these primers release small capsules of uncured primer to provide continued corrosion resistance.

Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Stop leaks in metal tanks and equipment without draining the contents.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

These gasket makers come in a tube.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

Use cartridges with a standard caulk gun for quick and easy dispensing.

Form bonds that will not degrade in the presence of oils and fuels.

In or out of water, these sealants maintain their strength.

Bond glass and stone to drywall, treated lumber, and subfloors.

These low-friction threadlockers harden slowly, allowing ample time to smoothly adjust multiple large bolts for even clamping.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

Secure threaded fasteners at temperature extremes—from -300° F to 2100° F.

Paste threadlockers are easy to apply and won't drip, even from overhead fasteners.

This gel clings to fasteners to prevent drips.

Wrap this no-mess tape around threaded fasteners up to 30 days before installation.

Use these threadlockers for threaded fasteners that require occasional fine-tuning, such as set screws.

Even on oily surfaces, these retaining compounds keep their hold.

Even on oily surfaces, these retaining compounds keep their hold.