Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as Torr Seal, this sealant forms a rigid bond that seals leaks on vacuum systems or components.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

This tape has a higher density than standard tape for a better seal between threads.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.

These two-part epoxy coatings resist chemicals and other solvents.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.

For use with steel and iron parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Use these dyes at the end of your zinc-plating process to add a decorative appearance.

Protect tools, dies, and other parts during shipping and storage with these durable, removable coatings. After peeling, they leave a greasy film for continued corrosion protection. Once removed, coatings can be melted again for repeat use.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.

These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

Stick these adhesive-backed products inside electrical enclosures, tool boxes, and cabinets to coat metal components—they emit a corrosion-inhibiting vapor for up to two years.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.

Use these primers on your surface before antislip coatings to maximize longevity.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings.

These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.

Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Turn any surface into a dry-erase board.

Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.

Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Prep, paint, and seal small scratches on metal surfaces with these pens.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.