Container Type Container Type |
---|
![]() | ![]() |
Cartridge | Tube |
![]() | ![]() |
Aerosol Can | Brush-Top Can |
![]() | ![]() |
Bottle | Brush-Top Bottle |
![]() | |
Sausage Pack |
For Use On For Use On | Show |
---|
|
For Use On For Use On | Hide |
---|
For Use With For Use With |
---|
|
Container Size Container Size |
---|
Maximum Temperature Maximum Temperature |
---|
|
For Joining For Joining |
---|
Cure Type Cure Type |
---|
|
Manufacturer Manufacturer |
---|
|
|
Formulation Formulation |
---|
|
Consistency Consistency |
---|
|
Specifications Met Specifications Met |
---|
|
Hardness Rating Hardness Rating |
---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Clarity Clarity |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Structural Adhesives
More
About Sealant Flexibility
More
Silicone Sealants

Made from silicone, these sealants are RTV (room-temperature vulcanizing). They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
When Dow Corning 700 requires a primer, for best results use PR-1200 on metal and PR-1205 on plastic.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Specifications Met | Choose a Color | Each | |
Dow Corning Silicone | |||||||||||||
700 | 10.1 | Cartridge | 15 min. | 24 hrs. | 575% | -25% to 25% | Soft (Durometer 20A) | -75° to 350° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass | FDA Compliant 21 CFR 177.2600, NSF/ANSI 51, UL Recognized Component | 000000 | 000000 |
Noncorrosive Silicone Sealants

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Color | Each | |
Permatex Silicone | |||||||||||||
81173 | 12.9 | Cartridge | 30 min. | 24 hrs. | 350% | Not Rated | Soft (Durometer 18A) | -75° to 450° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood | CA | Black | 0000000 | 000000 |
Optically Clear Sealants

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. 3M 730 UV is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Each | |
3M Hybrid Polymer | ||||||||||||
730 UV | 10.3 | Cartridge | 30 min. | 24 hrs. | 300% | Not Rated | 250 | Soft (Durometer 30A) | -40° to 190° | Metal Metal to Plastic Metal to Composites Plastic Plastic to Composites Composites Wood | 0000000 | 000000 |
Puncture-Resistant Sealants


Form seals that resist punctures, cuts, and abrasion to withstand heavy wear and tampering. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Polyurethane | ||||||||||||
10.1 | Cartridge | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 000000 |
20 | Sausage Pack | 90 min. | 48 hrs. | 225% | -12.5% to 12.5% | 250 | Medium (Durometer 55A) | 20° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | White | 0000000 | 00000 |
Optically Clear All-Weather Application Sealants

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics. Apply it in cold temperatures, on wet surfaces, and even through running water. The sealant is non-sagging, so it won't drip from vertical and overhead surfaces. It cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).
Elongation indicates flexibility—the higher the value is, the more a sealant can stretch. This sealant is good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Tensile Strength, psi | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Cannot Be Sold To | Each | |
Hybrid Polymer | ||||||||||||
10.3 | Cartridge | 45 min. | 4 days | 1,000% | 45 | Soft (Durometer 20A) | 40° to 140° | -40° to 180° | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; Northern VA; NY; PA; RI; VT; CO | 0000000 | 000000 |
Structural Sealants


These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Hybrid Polymer | ||||||||||||
760 UV | 9.8 | Cartridge | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 000000 | |
760 UV | 20.3 | Sausage Pack | 30 min. | 24 hrs. | 100% | Not Rated | Medium Hard (Durometer 55A) | -40° to 212° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | 00000000 | 00000 | |
3M Polyurethane | ||||||||||||
540 | 20.3 | Sausage Pack | 90 min. | 24 hrs. | 600% | -25% to 25% | Medium Soft (Durometer 40A) | -40° to 190° | Metal Plastic Rubber Composites Wood | 00000000 | 00000 | |
551 | 20.3 | Sausage Pack | 180 min. | 24 hrs. | 600% | Not Rated | Medium (Durometer 45A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Wood | White | 00000000 | 00000 |
Submersible Sealants


These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
3M Polyurethane | ||||||||||||
4200 FC | 3 | Tube | 2 hrs. | 24 hrs. | 400% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Composites Glass Wood Wood to Glass | White | 00000000 | 000000 |
4200 FC | 10 | Cartridge | 2 hrs. | 24 hrs. | 400% | Not Rated | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Plastic Metal to Composites Metal to Glass Plastic Plastic to Composites Plastic to Glass Composites Glass Wood Wood to Glass | 00000000 | 00000 |
Non-Hardening Thread Sealants with PTFE


PTFE provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools.
VOC (volatile organic compounds) regulations restrict sales of sealants that cannot be sold to the listed jurisdictions/areas.
Container | Max. Pressure, psi | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Each | |
Low Locking Strength | |||||||||||
Sealants | |||||||||||
0.125 | Tube | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 00000000 | 00000 |
16 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, Northern VA, NY, OH, PA, RI, UT | 00000000 | 00000 |
32 | Brush-Top Can | 10,000 | 3,000 | -100° to 600° | 2" | Paste | CSA Certified, CSA-US Certified, UL Classified | Blue | __ | 00000000 | 00000 |
Non-Hardening Thread Sealants


Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.
To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.
Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.
Container | Max. Pressure, psi | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | For Fluids | For Gases | Temp. Range, °F | For Max. Thread Dia. | Consistency | Specifications Met | Color | Cannot Be Sold To | Each | |
Low Locking Strength | |||||||||||
Sealants | |||||||||||
2 fl. oz. | Brush-Top Bottle | 10,000 | 300 | -65° to 450° | 2" | Paste | MIL-S-15204, UL Recognized Component | Gray | __ | 0000000 | 000000 |
8 fl. oz. | Brush-Top Can | 10,000 | 300 | -65° to 450° | 2" | Paste | MIL-S-15204, UL Recognized Component | Gray | __ | 0000000 | 00000 |
8 fl. oz. | Brush-Top Can | 6,000 | 3,000 | 20° to 140° | __ | Paste | NSF/ANSI 61 | Blue | CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, Northern VA | 000000 | 00000 |
High-Strength Self-Leveling Concrete Joint Sealants

Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Silicone sealant is RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Silicone | |||||||||||||
29 | Cartridge | 60 min. | 7 days | 1,000% | -50% to 100% | Soft (Durometer 20A) | 1" | 1/2" | -60° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 000000 |
High-Strength Concrete Joint Sealants


Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Silicone | |||||||||||||
20 | Sausage Pack | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 000000 |
29 | Cartridge | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
UV-Resistant Glass Sealants

These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | Each | |
Silicone | ||||||||||||
10.1 | Cartridge | 30 min. | 24 hrs. | 475% | -25% to 25% | Soft (Durometer 20A) | -75° to 400° | FDA Compliant 21 CFR 175.105, FDA Compliant 21 CFR 177.2600, Fed. Spec. TT-S-001543A Type II Class A, Fed. Spec. TT-S-00230C Type II Class A, NSF/ANSI 51 | Metal Metal to Glass Plastic Plastic to Glass Rubber Rubber to Glass Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 |
Roof Joint Sealants

Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Sealants that cannot be sold to the listed areas exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Cannot Be Sold To | Each | |
Butyl Rubber | |||||||||||||
10.1 | Cartridge | 24 hrs. | 48 hrs. | Not Rated | Not Rated | Not Rated | Not Rated | -40° to 180° | Metal, Plastic, Rubber, Masonry, Wood | White | CA, CO, CT, DE, MD, NH, RI, UT | 0000000 | 00000 |
Reusable Threadlockers



These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused. They cure at room temperature.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque | Color | Each | |
Medium Locking Strength | |||||||||||||
Vibra-Tite Threadlockers | |||||||||||||
VC-3 | 0.17 | __ | Tube | 10 sec. | 30 min. | -65° to 160° | 2" | Thin Liquid | 230 | Not Rated | Red | 00000000 | 00000 |
VC-3 | 1 | __ | Brush-Top Bottle | 10 sec. | 30 min. | -65° to 160° | 2" | Thin Liquid | 230 | Not Rated | Red | 00000000 | 00000 |
Threadlockers | |||||||||||||
__ | __ | 4.5 | Aerosol Can | 10 sec. | 5 min. | -55° to 170° | 2" | Thin Liquid | 100 | Not Rated | Red | 0000000 | 00000 |
Threadlockers for Plastic Fasteners

Specially formulated for plastics, these threadlockers secure nylon, PTFE, and other plastic threaded fasteners.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Temp. Range, °F | For Max. Thread Dia. | Consistency | Viscosity, cP | Breakaway Torque, in.-lbs. | Color | Each | |
Low Locking Strength | ||||||||||||
Loctite® Threadlockers | ||||||||||||
425 | 0.7 | Bottle | 2 min. | 24 hrs. | -65° to 180° | 1/4" | Thin Liquid | 60 | 9 | Blue | 000000000 | 000000 |