These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Also known as Torr Seal, this sealant forms a rigid bond that seals leaks on vacuum systems or components.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Apply these thread sealant sticks without a mess.

Apply this thread sealant stick without a mess.

Formulated to flow into small spaces, use these sealants between fine threads.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Remaining pliable over time, these high-temperature sealants protect against leaks caused by vibration and pressure—they naturally fill voids before leaks can develop.

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems.

Use color to identify water, gas, and chemical connections.

This tape contains nickel to prevent seizing and galling associated with stainless steel threaded connections. It’s also good for use with other metals.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Seal metal-to-metal joints in ductwork.

Repair equipment and vehicle windows with these sealants that are rated to withstand impact within three hours of application.

Seal glass windows in metal and wood fire-rated doors.

Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.

This thermally conductive coating keeps electrical components cool by dissipating heat.

These coatings require an ultraviolet curing lamp to reach full strength.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

Hot-melt potting compounds have excellent flexibility, good chemical and moisture resistance, and withstand a range of temperatures. They provide good electrical insulation.

Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Touch up scratches and wear on your enclosure with paint that matches its color.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

These patching compounds are the most flexible and watertight we offer.

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.

Make castings and fill voids with these two-part pourable epoxies.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

All the benefits of a gasket maker in a no-drip form.

Push the plunger to precisely dispense small amounts.

These gasket makers come in a tube.

Dispense a uniform bead when you press the nozzle.

Dispense a uniform bead when you press the nozzle.

These gasket makers come in a tube.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers come in a can.

Use cartridges with a standard caulk gun for quick and easy dispensing.

These gasket makers combine oil resistance and the flexibility to accommodate movement.

Use cartridges with a standard caulk gun for quick and easy dispensing.

All the benefits of gasketing adhesive in a no-drip form.

Form rigid seals on plumbing connections and duct.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

Prevent threaded fasteners from loosening due to shock and vibration.

Withstand demanding, high-vibration applications such as motor and pump housings with these threadlockers.

These threadlockers develop usable strength within one hour. Because they harden quickly on most metals, they don't require a primer.

These threadlockers meet NSF/ANSI 61 for drinking water.

This thick paste withstands temperatures up to 650 °F.

These threadlockers hold securely but stay flexible, so fasteners can be adjusted, removed, or reused.

Apply these threadlockers on fasteners that are already installed—their thin consistency allows them to flow into small gaps.

These threadlockers withstand temperatures up to 450° F.