We will reply to your message within an hour.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Resistant to mold and mildew, these sealants are well suited to high-humidity environments.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Mix a small amount of water-based paint with this caulk to match the color of your surface.
Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.
Press this adhesive-backed plastic tape into place for an immediate light-duty seal.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
The strongest submersible sealants we offer, these combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.
Prevent sound from passing through gaps and joints where walls, floors, and ceilings meet using these sealants to fill them.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
Seal joints and gaps in concrete.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Prepare joints and surfaces to ensure proper sealant adhesion.
These sealants don't degrade in sunlight.
Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.
Press this pliable rope into place to hold glass in window frames and seal leaks.
Seal glass windows in metal and wood fire-rated doors.
These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Tough and long-lasting, these flexible coatings protect against rust and corrosion.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.
These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.
These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
Use these coatings on structural lumber, decking, and wood shingles.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.
Refinish porcelain sinks, tubs, and tile and give laminates a high-gloss finish.
Create a washable writing surface.
Turn any surface into a dry-erase board.
Make your surface magnetic with this paint.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
Make items stand out under emergency lighting or in low-light environments.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.
Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.
Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.
These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.
Prepare metal surfaces for powder coating. These primers create a base layer that bonds with your top coat to extend the life of your powder coating.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint.
Fill cracks with these coatings to stop leaks and deaden sound.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
These patching compounds are the most flexible and watertight we offer.
Reinforce hot- and cold-applied asphalt patching compounds and coatings with this flexible fabric.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.
Use cartridges with a standard caulk gun for quick and easy dispensing.
The thick consistency of these gasket makers creates a seal right away even before they harden. Press the nozzle to dispense a uniform bead.
Create a seal to get your machine back up and running in just two hours. These gasket makers have a thick consistency that creates a seal right away, even before they harden.
These gasket makers combine oil resistance and the flexibility to accommodate movement.
Create gaskets that can flex to accommodate movement and won’t degrade from oil.
Form dense, rigid gaskets that won’t degrade in the presence of oil.
With a standard caulk gun, quickly and easily make dense, rigid gaskets that won’t degrade from oil.
These gasket makers combine the ability to withstand temperatures up to 600° F with the flexibility to accommodate movement.
Dispense a uniform bead when you press the nozzle.
All the benefits of gasketing adhesive in a no-drip form.
Bond glass and stone to drywall, treated lumber, and subfloors.
These durable finishes are detergent resistant and dry to a clear, high-gloss shine.
Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives.