100 Products

Apply these thread sealant sticks without a mess. They contain PTFE, which provides a slippery surface that keeps threads from binding. These sealants never fully harden, remaining pliable enough to self-heal and stop leaks before they start, so they’re often used in high-vibration applications that could cause standard thread sealants to fail. Since they have low locking strength, these sealants can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

PTFE provides a slippery surface that keeps threads from binding. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air.

Sealants with low locking strength prevent threads from loosening due to vibration and can be adjusted without tools.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start. They have low locking strength, so they can be adjusted without tools.

To adhere to safety standards for drinking water systems, use sealants that meet NSF/ANSI 61.

Sealants that cannot be sold to the listed regions are restricted due to local VOC (Volatile Organic Compounds) regulations.

Formulated to flow into small spaces, use these sealants between fine threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads. Threads coated with these sealants can be installed multiple times without recoating. They have low locking strength, so they prevent threads from loosening due to vibration and can be adjusted without tools. They meet NSF/ANSI 61 for use with drinking water.

These sealants have high locking strength, so they work in demanding applications, such as securing mounting studs in motor housings.

Room-temperature cure sealants must be mixed with water for use; they harden as the water evaporates. Mix about five parts powdered-sealant to one part water to form a thick consistency similar to peanut butter. Hardening can be accelerated with heat; do not heat to above 200° F. They require a hand tool to unthread.

1000° F max. temp. sealants expand as they harden.

1500° F max. temp. sealants are for use on cement-lined pipe joints prior to welding. The heat from the welding torch helps them begin to harden.

Formulated for high lubricity, these sealants allow easy assembly of finely threaded hydraulic and compressed air system components. They're also free of fillers that could contaminate system media. These sealants are anaerobic, so they don’t begin to harden until coated surfaces are threaded together, blocking exposure to air. VOC (Volatile Organic Compounds) regulations restrict sales to the listed jurisdictions/areas.

Sealants with medium locking strength prevent threads from loosening due to vibration and shock. They require a hand tool to unthread.

This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

Use color to identify water, gas, and chemical connections. This tape has a higher density than standard tape for a better seal between threads. Made of PTFE, it has a slippery surface that keeps threads from binding to make parts easy to assemble.

Made of PTFE, this tape has a slippery surface that keeps threads from binding to make parts easy to assemble.

PTFE tape with graphite creates a better seal between threads than plain PTFE tape, which helps prevent fluid and gas leaks. The graphite attaches to the PTFE, so this tape does not emit harmful VOCs.