These seals have a strong Inconel core covered with woven silica yarn that’s been treated to withstand temperatures up to 2300° F. They resist most refrigerants, salts, and grease.

A silicone-coated fiberglass cover sheds sparks and molten metal splash. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 450° F.

A ceramic cover makes these seals more chemical resistant than the seals with a silica cover. They resist acids (except hydrofluoric and phosphoric), diluted alkalies, most refrigerants, salts, and grease. Seals can withstand temperatures up to 1700° F.

These loosely-knitted fiberglass seals are more flexible and conformable than High-Temperature Slotted Edge Seals. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

These wool felt washers can be soaked with oil to lubricate joints.

Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.

This synthetic felt is an economical alternative to wool felt.

Similar to plaster, these adhesive-impregnated sheets and strips become moldable when water is added and harden as they dry. They can be used in sealing, insulating, and covering applications.

This temperature-resistant fabric is more cut resistant than Nomex.

Use these strips for high-temperature seals and heat insulation.

Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.

When seams and joints begin to show wear, this super-strong reinforcing tape provides support. It is flexible yet nonelastic and stays in place even in damp conditions.

This uncoated tape is thinner and more conformable than our other repair tape to reinforce irregular shapes.

For quick repairs, these small rolls of tape don't have a spool so they easily fit into a pocket.

It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.

This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.

Our thinnest duct tape, this tape is easy to unwind and tear by hand.

This tape discharges minor amounts of surface static electricity and resists static buildup.

Also known as roller tape, this tape is coated with silicone to grip smooth surfaces and resist sticky substances, such as ink. It adheres to itself without adhesive.

This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.

Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive.

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

This sleeving withstands temperatures over 1000°F, such as in refineries.

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.