How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Twist-Claw Hose Couplings for Air and Water
Also known as Chicago and universal couplings, these have an identical claw-style head that allows you to connect to another Chicago twist-claw hose coupling, regardless of the pipe size or barbed hose ID. To connect, push two couplings together with a quarter twist. Couplings have a safety clip and lanyard to prevent accidental disconnection.
Iron couplings are stronger and more durable than other metal couplings. Use in noncorrosive environments. Warning: There is no valve in these couplings. Stop the flow of air and water before you disconnect the line.
For technical drawings and 3-D models, click on a part number.
Cam-and-Groove Hose Couplings for Abrasive Material
Made of ductile iron, these couplings are tough enough to handle sand, cement, and other abrasive solids and slurries. They resist impact and wear better than aluminum and brass couplings. Use their cam-and-groove fittings to quickly connect and disconnect medium- to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket, forming a tight seal. To disconnect, lift both levers and pull out the plug. A complete coupling consists of a plug and a socket (both sold separately).
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -20° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, PT Coupling Cam-and-Groove
Plugs | 6" Retaining Chains | 12" Retaining Chains | ||||||
|---|---|---|---|---|---|---|---|---|
| Coupling Size | Plug OD | Max. Pressure | Each | Each | Each | |||
Ductile Iron | ||||||||
| 1 | 1 7/16" | 250 psi @ 72° F | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
| 2 | 2 1/2" | 250 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 3 | 3 5/8" | 200 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 4 | 4 3/4" | 150 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
- Maximum Pressure: See table
- Temperature Range: -20° to 250° F
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, PT Coupling Cam-and-Groove
Caps | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | 6" Retaining Chains | 12" Retaining Chains | |||||||||
| Coupling Size | Socket ID | No. of | Material | Pull Ring Material | Max. Pressure | Each | Each | Each | |||
Ductile Iron | |||||||||||
| 1 | 1 7/16" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 2 | 2 1/2" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 250 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 3 | 3 5/8" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 200 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
| 4 | 4 3/4" | 2 | 300 Series Stainless Steel | 300 Series Stainless Steel | 150 psi @ 72° F | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
Wire Tamper-Seal Tag Presses
Squeeze the handles together to seal locks on tamper-seal tags.
Presses for lead and aluminum locks have an adjustable flat die that lets you fine-tune the depth of the impression on the seal.
Replace a blank die, or switch to a new engraved message with extra dies. Only the adjustable flat die can be replaced on presses for lead and aluminum locks.
To Order: For engraved dies, please specify up to four characters including spaces for the top and bottom dies. Extra dies can have only one custom message.
Presses | Extra Dies | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Die Type | For Max. Lock Dia. | Opening Style | Overall Lg. | Material | Includes | Each | Each | ||
For Lead and Aluminum Locks | |||||||||
| Blank | 0.563" | Spring Assisted | 8" | Iron | One Flat Die, One Adjustable Flat Die | 000000 | 0000000 | 0000000 | 000000 |
| Engraved | 0.563" | Spring Assisted | 8" | Iron | One Flat Die, One Adjustable Flat Die | 000000 | 000000 | 0000000 | 00000 |
Screw Conveyors
Add on to an existing screw conveyor or keep it running like new.
Iron bearings are oil impregnated and offer longer life for abrasive materials.
For technical drawings and 3-D models, click on a part number.
