Clear All
Tip Type Tip Type | Show |
|---|
 | Drilling |
Length Length |
|---|
For Use In For Use In |
|---|
|
|
Material Material |
|---|
|
Threading Threading |
|---|
 | Partially Threaded |
 | Fully Threaded |
Head Diameter Head Diameter |
|---|
|
|
|
Tapping Method Tapping Method |
|---|
 |  |
| Thread Forming | Thread Cutting |
Screw Features Screw Features |
|---|
 | Cutting Wings |
For Maximum Wood Thickness For MaximumWood Thickness |
|---|
|
|
|
Head Height Head Height |
|---|
Drill Tip Length Drill Tip Length |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Tapping Screws
More
About Hex Head Screws and Bolts
More
Steel Phillips Drilling Screws for Joining Wood to Metal
With Cutting Wings
Without Cutting Wings
These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation. Length is measured from the top of the head.
Screws with cutting wings drill a slightly larger hole in the wood to allow for expansion. The wings break off when they contact metal, so the screw can tap the remainder of the hole.
Zinc-plated steel screws resist corrosion in wet environments.
Corrosion-resistant-coated steel screws are a good choice for ACQ-treated (arsenic-free) lumber.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Screw Features | Drill Point Size | Drill Tip Lg. | For Metal Thick. | For Wood Thick. | Dia. | Ht. | Drive Size | Thread Size  | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||||
No. 10 | |||||||||||||||
| 3 1/2" | Cutting Wings | No. 4 | 3/8" | 0.11"-0.21" | 0.75"-2.5" | 0.362" | 0.116" | No. 2 | 10-24 | __ | Fully Threaded | __ | 10 | 000000000 | 00000 |
| 4" | Cutting Wings | No. 4 | 3/8" | 0.11"-0.21" | 0.75"-2.75" | 0.362" | 0.116" | No. 2 | 10-24 | __ | Fully Threaded | __ | 5 | 000000000 | 0000 |
No. 12 | |||||||||||||||
| 2" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.5"-1.25" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | __ | 10 | 000000000 | 00000 |
| 2 1/2" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.5"-1.5" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | __ | 10 | 000000000 | 00000 |
| 3 1/2" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.75"-2.5" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | __ | 5 | 000000000 | 0000 |
| 4" | Cutting Wings | No. 4 | 7/16" | 0.11"-0.25" | 0.75"-2.625" | 0.412" | 0.132" | No. 3 | 12-24 | __ | Fully Threaded | __ | 5 | 000000000 | 00000 |
1/4" | |||||||||||||||
| 2 3/4" | Cutting Wings | No. 4 | 1/2" | 0.11"-0.375" | 0.75"-1.75" | 0.472" | 0.153" | No. 3 | 1/4"-20 | __ | Fully Threaded | __ | 10 | 000000000 | 00000 |
| 3 1/4" | Cutting Wings | No. 4 | 1/2" | 0.11"-0.375" | 0.75"-2.25" | 0.472" | 0.153" | No. 3 | 1/4"-20 | __ | Fully Threaded | __ | 5 | 000000000 | 00000 |
| 3 1/2" | Cutting Wings | No. 4 | 1/2" | 0.11"-0.375" | 0.75"-2.5" | 0.472" | 0.153" | No. 3 | 1/4"-20 | __ | Fully Threaded | __ | 5 | 000000000 | 00000 |
| 3 3/4" | Cutting Wings | No. 4 | 1/2" | 0.11"-0.375" | 0.75"-2.75" | 0.472" | 0.153" | No. 3 | 1/4"-20 | __ | Fully Threaded | __ | 5 | 000000000 | 00000 |
Corrosion-Resistant-Coated Steel | |||||||||||||||
No. 10 | |||||||||||||||
| 3/4" | __ | No. 3 | 1/4" | 0.04"-0.17" | 0.25"-0.375" | 0.48" | 0.144" | No. 2 | 10-24 | __ | Fully Threaded | __ | 100 | 000000000 | 00000 |
| 1" | __ | No. 3 | 1/4" | 0.04"-0.17" | 0.25"-0.5" | 0.48" | 0.144" | No. 2 | 10-24 | __ | Fully Threaded | __ | 100 | 000000000 | 00000 |
| 1 1/4" | __ | No. 3 | 1/4" | 0.04"-0.17" | 0.25"-0.75" | 0.48" | 0.144" | No. 2 | 10-24 | __ | Fully Threaded | __ | 100 | 000000000 | 0000 |
| 1 7/16" | Cutting Wings | No. 3 | 1/4" | 0.06"-0.17" | 0.25"-0.75" | 0.41" | 0.17" | No. 2 | 10-24 | __ | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 1/2" | __ | No. 3 | 1/4" | 0.04"-0.18" | 0.25"-0.75" | 0.48" | 0.144" | No. 2 | __ | 16 | Fully Threaded | __ | 100 | 000000000 | 00000 |
| 1 13/16" | __ | No. 3 | 13/16" | 0.04"-0.15" | 0.25"-0.75" | 0.47" | 0.135" | No. 2 | __ | 16 | Fully Threaded | __ | 50 | 000000000 | 0000 |
No. 12 | |||||||||||||||
| 1 5/8" | Cutting Wings | No. 4 | 7/16" | 0.13"-0.25" | 0.75"-1.125" | 0.476" | 0.25" | No. 3 | 12-24 | __ | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 1 3/4" | Cutting Wings | No. 4 | 3/4" | 0.06"-0.31" | 0.5"-0.75" | 0.54" | 0.165" | No. 3 | 12-24 | __ | Fully Threaded | __ | 50 | 000000000 | 00000 |
| 2 1/4" | Cutting Wings | No. 4 | 1/2" | 0.13"-0.25" | 0.75"-1.375" | 0.438" | 0.16" | No. 3 | 12-24 | __ | Fully Threaded | __ | 10 | 000000000 | 00000 |
| 2 3/4" | Cutting Wings | No. 4 | 1/2" | 0.13"-0.25" | 0.75"-1.625" | 0.438" | 0.16" | No. 3 | 12-24 | __ | Fully Threaded | __ | 10 | 000000000 | 00000 |
| 3 5/8" | __ | No. 2 | 1 3/4" | 0.04"-0.15" | 0.75"-1.625" | 0.415" | 0.16" | No. 3 | __ | 14 | Fully Threaded | __ | 25 | 000000000 | 00000 |
1/4" | |||||||||||||||
| 3" | Cutting Wings | No. 4 | 1/2" | 0.13"-0.25" | 0.75"-2" | 0.507" | 0.175" | No. 3 | 1/4"-20 | __ | Fully Threaded | __ | 25 | 000000000 | 00000 |
| 4" | Cutting Wings | No. 4 | 7/8" | 0.06"-0.31" | 0.75"-2.875" | 0.485" | 0.185" | No. 3 | 1/4"-20 | __ | Partially Threaded | 2 3/16" | 10 | 000000000 | 0000 |
Stainless Steel Phillips Drilling Screws for Joining Wood to Metal
18-8 stainless steel screws have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. They speed installation by drilling, tapping, and fastening wood and metal in a single operation. Length is measured from the top of the head.
Screws with cutting wings drill a slightly larger hole in the wood to allow for expansion. The wings break off when they contact metal, so the screw can tap the remainder of the hole.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Screw Features | Drill Point Size | Drill Tip Lg. | Dia. | Ht. | Drive Size | Thread Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
Galvanic Barrier Coated 18-8 Stainless Steel | |||||||||||||
No. 10 | |||||||||||||
| 1 1/2" | Cutting Wings | No. 3 | 1/4" | 0.37" | 0.178" | No. 2 | __ | 16 | Fully Threaded | __ | 10 | 000000000 | 000000 |
No. 12 | |||||||||||||
| 1" | __ | No. 2 | 19/64" | 0.415" | 0.09" | No. 3 | __ | 14 | Fully Threaded | __ | 10 | 000000000 | 0000 |
| 2 13/16" | Cutting Wings | No. 5 | 45/64" | 0.415" | 0.2" | No. 3 | __ | 14 | Partially Threaded | 1 1/2" | 5 | 000000000 | 0000 |
1/4" | |||||||||||||
| 2 13/16" | Cutting Wings | No. 5 | 45/64" | 0.48" | 0.2" | No. 3 | 1/4"-20 | __ | Partially Threaded | 1 1/2" | 5 | 000000000 | 00000 |
| 3" | __ | No. 3 | 5/16" | 0.48" | 0.1" | No. 3 | 1/4"-20 | __ | Partially Threaded | 1 1/2" | 5 | 000000000 | 00000 |
| 4" | __ | No. 3 | 5/16" | 0.48" | 0.1" | No. 3 | 1/4"-20 | __ | Partially Threaded | 1 1/2" | 5 | 000000000 | 00000 |
Torx Drilling Screws for Joining Wood to Metal
A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess. These screws speed installation by drilling, tapping, and fastening wood and metal in a single operation. Made from zinc-plated steel, they resist corrosion in wet environments. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Screws for Hardwood
Also known as Type 17 auger point screws, these penetrate hardwood and reduce driving torque. They require a pilot hole to prevent splitting when used near an edge. They're beveled under the head for use in countersunk holes. Ribs underneath the head prevent loosening. Made from 18-8 stainless steel, they have good chemical resistance and are a good choice for ACQ-treated (arsenic-free) lumber. Screws may be mildly magnetic. Length is measured from the top of the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Approximate Threads per Inch | Threading | Min. Thread Lg. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
No. 6 | |||||||||
| 1 5/8" | 0.279" | 0.083" | No. 2 | 9 | Partially Threaded | 1.125" | 25 | 000000000 | 00000 |
No. 8 | |||||||||
| 1 1/4" | 0.311" | 0.088" | No. 2 | 8 | Partially Threaded | 0.838" | 25 | 000000000 | 0000 |
| 1 1/2" | 0.311" | 0.088" | No. 2 | 8 | Partially Threaded | 1" | 25 | 000000000 | 0000 |
| 1 5/8" | 0.311" | 0.088" | No. 2 | 15 | Partially Threaded | 1.083" | 25 | 000000000 | 0000 |
| 1 3/4" | 0.311" | 0.088" | No. 2 | 8 | Partially Threaded | 1.19" | 25 | 000000000 | 00000 |
| 2" | 0.311" | 0.088" | No. 2 | 15 | Partially Threaded | 1.333" | 25 | 000000000 | 00000 |
| 2 1/2" | 0.311" | 0.088" | No. 2 | 15 | Partially Threaded | 1.667" | 10 | 000000000 | 0000 |
| 3" | 0.311" | 0.088" | No. 2 | 8 | Partially Threaded | 2" | 10 | 000000000 | 0000 |
No. 10 | |||||||||
| 2 1/2" | 0.378" | 0.11" | No. 2 | 13 | Partially Threaded | 1.667" | 10 | 000000000 | 0000 |
| 3" | 0.378" | 0.11" | No. 2 | 13 | Partially Threaded | 2" | 10 | 000000000 | 0000 |
| 3 1/2" | 0.378" | 0.11" | No. 2 | 8 | Partially Threaded | 2.25" | 10 | 000000000 | 00000 |
| 4" | 0.378" | 0.11" | No. 2 | 8 | Partially Threaded | 2.625" | 5 | 000000000 | 0000 |
Metric Steel Phillips Rounded Head Drilling Screws for Metal
Drill a pilot hole, cut threads, and fasten in one motion with these metric-threaded screws. They're self-drilling, meaning they have a pointed tip that forms a pilot hole as they enter your material. As they turn, they also cut their own reusable threads, so you don’t need to drill and tap a hole first. Designed for fastening metal to metal, these screws are often used to install ducts and other assemblies where you can only access one side. The rounded head gives your project a finished look. Made of steel, they’re strong and wear resistant. They’re also plated with zinc to protect the steel from rust and extend the life of the screws. They meet ISO and DIN dimensional standards.
The miminum thread length may vary for screws with an overall length of 50mm or longer.
For technical drawings and 3-D models, click on a part number.
Drill Tip | Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., mm | Min. Thread Lg., mm | Type | Lg., mm | Max. Drilling Thick., mm | Dia., mm | Ht., mm | Drive Size | Approximate Thread Pitch, mm | For Use In | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||||||
M2.9 | |||||||||||||
| 9.5 | 3.3 | No. 1 | 6.25 | 1.9 | 5.6 | 2.4 | No. 1 | 1.1 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 13 | 6.6 | No. 1 | 6.4 | 1.9 | 5.6 | 2.4 | No. 1 | 1.1 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 16 | 9.6 | No. 1 | 6.4 | 1.9 | 5.6 | 2.4 | No. 1 | 1.1 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 19 | 12.5 | No. 1 | 6.5 | 1.9 | 5.6 | 2.4 | No. 1 | 1.1 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
M3.5 | |||||||||||||
| 9.5 | 2.9 | No. 2 | 6.65 | 2.25 | 7 | 2.6 | No. 2 | 1.3 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 13 | 6.2 | No. 2 | 6.8 | 2.25 | 7 | 2.6 | No. 2 | 1.3 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 16 | 9.2 | No. 2 | 6.8 | 2.25 | 7 | 2.6 | No. 2 | 1.3 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 19 | 12.1 | No. 2 | 6.9 | 2.25 | 7 | 2.6 | No. 2 | 1.3 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 22 | 15.1 | No. 2 | 6.9 | 2.25 | 7 | 2.6 | No. 2 | 1.3 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 25 | 18.1 | No. 2 | 6.9 | 2.25 | 7 | 2.6 | No. 2 | 1.3 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 32 | 25.1 | No. 2 | 6.9 | 2.25 | 7 | 2.6 | No. 2 | 1.3 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
M3.9 | |||||||||||||
| 9.5 | 2.8 | No. 2 | 6.7 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 13 | 5.8 | No. 2 | 7.2 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 16 | 8.8 | No. 2 | 7.2 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 19 | 11.7 | No. 2 | 7.3 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 22 | 14.7 | No. 2 | 7.3 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 25 | 17.7 | No. 2 | 7.3 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 32 | 24.5 | No. 2 | 7.5 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 38 | 30.5 | No. 2 | 7.5 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 45 | 37.5 | No. 2 | 7.5 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 50 | 42.5 | No. 2 | 7.5 | 2.4 | 7.5 | 2.8 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
M4.2 | |||||||||||||
| 13 | 4.3 | No. 2 | 8.7 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 16 | 7.3 | No. 2 | 8.7 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 19 | 10.3 | No. 2 | 8.7 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 22 | 13.3 | No. 2 | 8.7 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 25 | 16.3 | No. 2 | 8.7 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 32 | 23 | No. 2 | 9 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 38 | 29 | No. 2 | 9 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 45 | 36 | No. 2 | 9 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 0000 |
| 50 | 41 | No. 2 | 9 | 3 | 8.2 | 3.1 | No. 2 | 1.4 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
M4.8 | |||||||||||||
| 13 | 3.7 | No. 2 | 9.3 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 0000 |
| 16 | 5.8 | No. 2 | 10.2 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 19 | 8.7 | No. 2 | 10.3 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 22 | 11.7 | No. 2 | 10.3 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 25 | 14.7 | No. 2 | 10.3 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 100 | 000000000 | 00000 |
| 32 | 21.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 0000 |
| 38 | 27.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 0000 |
| 45 | 34.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 0000 |
| 50 | 39.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 60 | 49.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 70 | 59.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 0000 |
| 80 | 69.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 0000 |
| 90 | 79.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 00000 |
| 100 | 89.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 00000 |
| 110 | 99.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 10 | 000000000 | 0000 |
| 120 | 109.5 | No. 2 | 10.5 | 4.4 | 9.5 | 3.7 | No. 2 | 1.6 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 10 | 000000000 | 0000 |
M5.5 | |||||||||||||
| 16 | 5 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 0000 |
| 19 | 8 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 0000 |
| 22 | 11 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 0000 |
| 25 | 14 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 32 | 21 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 38 | 27 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 45 | 34 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 0000 |
| 50 | 39 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 0000 |
| 60 | 49 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 00000 |
| 70 | 59 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 00000 |
| 80 | 69 | No. 3 | 11 | 5.25 | 11 | 4 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 00000 |
M6.3 | |||||||||||||
| 16 | 4 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 19 | 7 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 22 | 10 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 25 | 13 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 50 | 000000000 | 00000 |
| 32 | 20 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 0000 |
| 38 | 26 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 0000 |
| 45 | 33 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 0000 |
| 50 | 38 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 00000 |
| 60 | 48 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 25 | 000000000 | 00000 |
| 70 | 58 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 10 | 000000000 | 0000 |
| 80 | 68 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 10 | 000000000 | 0000 |
| 90 | 78 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 10 | 000000000 | 0000 |
| 100 | 88 | No. 3 | 12 | 6 | 12.5 | 4.6 | No. 3 | 1.8 | Steel, Stainless Steel, Aluminum, Fabric, Insulation, Sheet Metal, Wood | DIN 7504 N, ISO 7049 | 10 | 000000000 | 0000 |
Drilling Screw-Style Hangers
Drill holes with the point on these hangers. Install with a special driver bit (sold separately).
Zinc-yellow-chromate-plated hangers are corrosion resistant in wet environments. Some hangers with a 7/16" head width can drill through steel as thick as 12 ga.; others can drill through sheet metal and wood.
For technical drawings and 3-D models, click on a part number.