Carts are made of welded steel for maximum durability.

Carts meet NSF/ANSI standards for use in food-service areas.

Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.

With shelves on one side and a pegboard on the other, these carts keep tools easily accessible.

Made of strong yet lightweight plastic, these carts have rounded corners to protect walls from damage and a storage compartment near the handle to contain small items.

These carts have easy-to-clean surfaces, lipped shelves to contain spills, and meet NSF/ANSI 2 sanitary standards for food-service applications.

Drawers on these corrosion-resistant carts provide storage for tools and supplies, while the shelves hold larger items.

Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.

The shelves on these carts have high sides to prevent items from sliding off.

The shelves are split into identical sides so you can efficiently organize two operations on one cart.

High mesh panels on three sides and an open top allow you to stack tall items while maintaining good visibility and quick access.

Built-in steps and a compartment designed for light bulbs makes light maintenance easy.

No need to lug around a ladder and a cart—these carts do the job of both.

For the most demanding applications, these trucks carry loads of 1,200 lbs. or more.

These trucks resist rust and corrosion, making them the easiest platform trucks to clean.

Wood platforms are quieter, and grip loads and absorb impact better than trucks with a metal platform.

For added strength, the platform on these trucks is reinforced with steel to handle loads of 1,000 lbs. or more.

Tall handles let you stack higher than other trucks, and a narrow platform with rigid casters in the center and swivel casters at each end let you maneuver in tight spaces. Remove the handles for easy unloading.

Made of steel for durability, these trucks have removable rails that allow you to configure them to accommodate a variety of long, flat loads.

Add wheels to a door, partition, or piece of sheet stock to make moving a one-person job.

Mesh side panels maximize air circulation and visibility of contents. The all-welded steel construction delivers strength and durability.

The top rim on these trucks is double-walled to handle the hardest knocks. They are made of lightweight plastic that resists dents, corrosion, and many chemicals.

Ribbed sidewalls add strength while a seamless interior prevents leaks in these lightweight trucks that resist dents, corrosion, and many chemicals.

These seamless trucks have a capped drain for easy cleaning and sanitizing, and are made of FDA listed materials for use with food. They resist dents, corrosion, and many chemicals and have ribbed sidewalls for added strength.

The combination of an offset handle and V-shaped cradle lets one person balance and move large, long loads.

Drive these carriers to move across your warehouse or manufacturing floor at speeds up to 9 mph—three times faster than walking. You can easily maneuver them and make sharp turns since they move forward, backward, and have the smallest turning radius we offer.

The platforms on these wagons have a 6" high lip to contain loose material.

For added security, drawers are concealed behind padlockable doors.

These workbenches are dent and rust resistant.

Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.

At 24" wide, these compact workbenches provide storage and a work surface even when space is limited.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They are often used as printer stands.

These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.

A lower shelf provides additional storage space. The durable steel top won't warp or splinter.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.

The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.

Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks.

These durable tables won't warp or splinter. They can be configured at a custom height.

These workstations have almost twice the top capacity of our standard stand-up-height workstations.

Both the wheel bearings and the swivel bearings are protected to lengthen the life of these casters.

Thicker frames, larger mounting plates, and a heavy duty swivel design make these casters more durable than other casters in their capacity range.

Popular in hospitals and laboratories, our quietest casters have a soft, cushioning rubber tread with a hard polypropylene core for strength.

Chrome or zinc plating gives these casters a bright, clean finish.

Our most popular casters for carts and dollies.

Made from a special blend of rubber, the wheels on these casters roll easily over smooth and rough surfaces.

Used on hotel bellman's carts, these casters have a compact frame for use on small appliances and furniture.

These economical casters are designed for moderately heavy loads.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

Low mount heights and small mounting plates make these a good choice where space is limited.

Forged steel construction gives these casters the strength for demanding applications.

More durable than other casters in their capacity range, these withstand the stress of sudden impact.

These are good general purpose casters for moderately heavy loads.

Withstanding temperatures up to 1600° F, these are the most heat-resistant casters we offer.

These casters match many common carts and dollies.

Often used on creeper stools, these have a smooth-rolling angled wheel that creates a low profile.

The steel frame has a black powder-coated finish to blend in with your equipment.

These are good general purpose casters for moderately heavy loads.

Offered in a variety of mounting plate sizes, these casters match many common carts and dollies.

Zinc plating gives these casters a bright, clean finish.

Mount these casters to the corners of carts, equipment, and angle iron.

Get the strength of nylon with the cushion of rubber.

The lightweight wheels on these casters are easy to get rolling.

Sealed swivel bearings lengthen the life of these casters.

Forged steel construction gives these casters the strength for demanding applications.

Also known as twin-wheel casters, these lightweight and economical casters are often used on furniture and displays.

These casters match many common carts and dollies.

These casters have some of the lowest mount heights in their capacity range.

Our most popular casters for carts and dollies.

Stable and easy to turn, these casters have the lowest mount heights in their capacity range.

With a 304 stainless steel frame for good corrosion resistance, these casters are an economical alternative to washdown casters. Wheels range from soft rubber that absorbs shock and sound while providing good traction on rough surfaces, to hard, impact-resistant rubber that rolls easily on smooth surfaces.

Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. They can be used on smooth or rough floors and in areas with debris. Their 304 stainless steel frame is corrosion resistant.

Our most corrosion-resistant casters have a 316 stainless steel frame and stainless steel wheel bearings that stand up to frequent washdowns. Their soft rubber wheels absorb shock and provide good traction on rough surfaces.

Precision steel ball bearings result in smoother rolling than other high-capacity corrosion-resistant casters. They have a stainless steel frame for good corrosion resistance. Their polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber.

A stainless steel frame and rust-resistant bearings make these casters good options for food-service equipment that's frequently washed down. The phenolic wheels are nonmarking and roll best on smooth surfaces.

The wheels on these casters are made of a special rubber that is impact and chemical resistant and absorbs shock for smooth rolling over rough surfaces. They have a stainless steel frame and sealed bearings for corrosion resistance.