These switches electrically activate automated controls or alarms when a set pressure is reached.

Use in high-temperature applications up to 225° F.

These medium-pressure switches electrically activate automated controls or alarms when a set pressure is reached.

A clear cover allows you to see if the switch is on or off.

With a digital output, these switches connect to your PLC to activate automated controls or alarms when a set pressure is reached, up to 5,800 psi. Twist the outer rings by hand to easily adjust the setpoint.

These switches come set at your desired setpoint to prevent unintentional changes.

Switches have a digital display for easy monitoring at the source of your application.

Use in high-pressure applications up to 6,000 psi.

Often used with ovens, dryers, and HVAC systems, these switches detect small differences in pressure.

These switches operate based on the difference in pressure between two process lines. When the differential pressure exceeds your setpoint, the switch is activated.

Change your setpoint with a twist of the outer ring.

A clear cover allows you to see if the switch is on or off.

Also known as an air-to-electric switch, this relay converts an air signal to an electric signal.

Combine a push-button actuator with a switching mechanism to build a complete switch.

These switches have a low-profile design to fit in water pipelines with limited clearance.

Designed for applications with consistent flow, these switches have a fixed set point.

These switches have a fixed set point for applications with consistent flow.

For protection from dirt, washdowns, and corrosion, these switches have an enclosure that meets NEMA 4X.

At half the height of standard insertion flow switches, these are often used in low-clearance areas.

Use this switch to sense changes in airflow velocity.