Also known as tap-end and fixture studs, these rods have friction-fit threads on one end to resist loosening and standard threads on the other side for attaching a nut.

Mount through the counterbored hole with a socket head cap screw to support and position workpieces and fixtures from the bottom or side.

The swiveling tip supports uneven and angled surfaces.

Screw the shank into a threaded hole for quick installation and removal.

The shoulder provides a consistent height reference point and keeps the pin from being pressed through the fixture.

Encase these pins while molding plastic or composite parts. Once set, the knurls resist movement, letting you align the workpiece with precision on a plate or table.

The head on these pins slides side-to-side in one direction. Use one of these pins and one standard round-head pin to prevent jamming when loading and unloading workpieces with inconsistent hole spacing.

When locating a workpiece using through-hole alignment pins, use one of these bushings and one standard bushing to prevent the pins from binding in your fixture.

A good choice for automated clamping, these retractors use compressed air to extend and retract a locating pin, protecting the pin from damage in applications where fixtures move through a process, such as along a conveyor belt.

To align two parts with more precision than standard spring plungers, these index plungers have a mating bushing that improves alignment and repeatability.

Install tooling balls in a workpiece or fixture to create a precise measurement reference point. Push the shank further into the hole to adjust the height of the ball.

As the workpiece pushes against the pin head in one direction, the internal spring pushes back to hold it in place for clamping.

Thread in a screw, handle, or other part to create the right size and shape guide pin for your application.

Get everything needed for basic workholding on a machine table.