Cleanout Plug OD/Fitting ID Cleanout Plug OD/Fitting ID |
|---|
|
|
|
Maximum Water Back Pressure Maximum WaterBack Pressure |
|---|
|
Cleanout Plugs
Close off your drain cleanout pipe with these threaded plugs. Note: If you do not know your pipe size, measure the OD of your existing cleanout plug or the ID of your cleanout fitting and match to the value listed.
Recessed | Raised | |||||
|---|---|---|---|---|---|---|
| For Pipe Size | Thread Type | Cleanout Plug OD/Fitting ID | Each | Each | ||
Brass | ||||||
| 1 1/2 | NPT | 1 7/8" | 0000000 | 00000 | 0000000 | 00000 |
| 2 | NPT | 2 3/8" | 0000000 | 00000 | 0000000 | 0000 |
| 2 1/2 | NPT | 2 27/32" | 000000 | 00 | 0000000 | 00000 |
| 3 | NPT | 3 15/32" | 0000000 | 00000 | 0000000 | 00000 |
| 3 1/2 | NPT | 3 31/32" | 0000000 | 00000 | 0000000 | 00000 |
| 4 | NPT | 4 15/32" | 0000000 | 00000 | 0000000 | 00000 |
| 4 1/2 | NPT | 4 31/32" | 0000000 | 00000 | 0000000 | 00000 |
| 5 | NPT | 5 17/32" | 0000000 | 00000 | 0000000 | 00000 |
| 5 1/2 | NPT | 6" | 0000000 | 00000 | 0000000 | 00000 |
| 6 | NPT | 6 19/32" | 0000000 | 00000 | 0000000 | 00000 |
Black ABS Plastic | ||||||
| 1 1/2 | NPT | 1 7/8" | 0000000 | 0000 | 000000 | 00 |
| 2 | NPT | 2 3/8" | 0000000 | 0000 | 000000 | 00 |
| 2 1/2 | NPT | 2 27/32" | 0000000 | 0000 | 000000 | 00 |
| 3 | NPT | 3 15/32" | 0000000 | 0000 | 000000 | 00 |
| 3 1/2 | NPT | 3 31/32" | 0000000 | 0000 | 000000 | 00 |
| 4 | NPT | 4 15/32" | 0000000 | 0000 | 000000 | 00 |
| 4 1/2 | NPT | 4 31/32" | 0000000 | 0000 | 000000 | 00 |
| 6 | UNC | 6 19/32" | 0000000 | 00000 | 000000 | 00 |
| Driver for Recessed Plugs | 000000 | Each | 000000 |
Drain Pipe Plugs
Seal unthreaded pipe ends with these plugs. They come with a band that clamps over the outside wall of your pipe and tightens with a screwdriver.
For Pipe | Max. Back Pressure | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | OD | Water, ft. of head | Air | Temp. Range | Material | Clamp Material | Each | |
| 1 1/2 | 1.78"-1.90" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 00000 |
| 2 | 2.25"-2.38" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 0000 |
| 3 | 3.34"-3.50" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 0000 |
| 4 | 4.31"-4.50" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 0000 |
| 5 | 5.30"-5.62" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 00000 |
| 6 | 6.30"-6.62" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 00000 |
| 8 | 8.38"-8.62" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 00000 |
| 10 | 10.20"-10.80" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 00000 |
| 12 | 12.20"-12.80" | 10 | Not Rated | Not Rated | Neoprene Rubber | Stainless Steel | 0000000 | 00000 |
Floor Drain Backflow Preventers
Put an end to water damage from backed-up sewers. To install, place a preventer into your floor drain pipe and tighten the screws—the rubber collar will expand for proper fit. When water backs up, the rubber float will rise to seal off the drain. When water recedes, the float will drop for normal drainage.
Square-Head Expansion Plugs
Turn the square head of the plug into the sealing ring to close off pipe openings. Maximum air back pressure is the amount of pressure a plug can withstand without moving. Maximum water back pressure refers to the pressure resulting from the height of the water above the plug.
For Pipe | Max. Back Pressure | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | ID | Air, psi | Water, ft. of head | O'all Ht. | Temp. Range, °F | Seal Material | Each | |
Plastic Head | ||||||||
| 1 1/2 | 1.61"-1.71" | 21 | 50 | 2" | 35° to 210° | PVC | 00000000 | 00000 |
| 2 | 2.07"-2.16" | 21 | 50 | 2" | 35° to 210° | PVC | 00000000 | 0000 |
| 3 | 3.07"-3.16" | 21 | 50 | 2" | 35° to 210° | PVC | 00000000 | 0000 |
| 4 | 4.03"-4.12" | 21 | 50 | 2" | 35° to 210° | Polyurethane Rubber | 00000000 | 00000 |
| 6 | 6.07"-6.16" | 13 | 30 | 2" | 35° to 210° | Polyurethane Rubber | 00000000 | 00000 |