For Lifting Shackles | McMaster-Carr

Filter by

Pin Diameter

Pin Type

Weight Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

100,000 lb. or greater

Opening Width

Application

Material

Shackle Type

Thickness

Finish

Inside Length

Inside Width

Safety Factor

Attachment Type

Pin Material

Specifications Met

Straight-Link Chain Trade Size

Color

Applied Load Direction

For Web Width

For Use With

RoHS

REACH

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Performance

Corrosion Resistant

Dual Connect

Heavy Vibration Resistant

Body Thickness

191 Products

Shackle Type

Anchor

Handle vertical and side loads without warping

102 products

D-Type

The best choice for lifting and towing with chain

58 products

Shackle Type

Flat

Keep web slings from folding or bunching

17 products

Flexible

Wrap around a variety of lifting or anchor points

8 products

Anchor Shackles for Lifting

Screw Pin

Safety Cotter Pin

Flush

Hammer-Set-Dowel

Your go-to choice for connecting hooks, slings, and other rigging and lifting equipment. The rounded body on these shackles supports vertical or side loads without fatiguing or warping the shape. They meet ASME specifications for rigging and lifting, so they can hoist everything from steel beams to bulldozers. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as bow shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

Flush Hammer-Set-Dowel Pin—Hammer in two dowel pins to hold the pin in place. These shackles stay put even under heavy, shifting loads and in long-term rigging setups. They also won't snag on clothing or other nearby material.

Black-Oxide Steel—The dark finish on these shackles resists occasional moisture.

Galvanized Steel—A thick coating protects these shackles in wet and outdoor environments better than black-oxide steel. However, they corrode when exposed to salt water and chemicals.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

High-Strength Powder-Coated Alloy Steel—The powder-coating won't chip off as easily as paint. These shackles combine the strength of alloy steel with corrosion resistance in wet and outdoor environments.

Highly-Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met		Each
Screw Pin







				Black-Oxide Steel

				3/16"	3/8"	1/4"	7/8"	9/16"	665	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000


				1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	0000
				5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	0000
				3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	0000
				7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				5/8"	1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				3/4"	1 1/4"	7/8"	3"	2"	9,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				7/8"	1 7/16"	1"	3 1/4"	2 5/8"	13,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				1"	1 11/16"	1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000




						Galvanized Steel

						3/16"	13/32"	1/4"	29/32"	19/32"	600	ASME B30.26	0000000	0000


						1/4"	1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26, Fed. Spec. RR-C-271	0000000	0000
						5/16"	17/32"	13/32"	1 1/4"	13/16"	1,500	ASME B30.26	0000000	00000
						7/16"	3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
						1/2"	13/16"	5/8"	1 29/32"	1 5/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
						5/8"	1 1/16"	3/4"	2 13/32"	1 23/32"	7,100	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
						3/4"	1 1/4"	7/8"	2 13/16"	2"	10,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
						7/8"	1 15/32"	1"	3 5/16"	2 9/32"	14,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
						1"	1 11/16"	1 1/8"	3 3/4"	2 11/16"	18,700	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
						1 1/8"	1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
						1 1/4"	2 1/32"	1 3/8"	4 23/32"	3 1/4"	26,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000


						1 3/8"	2 1/4"	1 17/32"	5 7/32"	3 5/8"	29,700	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
						1 1/2"	2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	0000000	000000
						1 3/4"	2 31/32"	2"	7"	4 3/4"	50,000	ASME B30.26	0000000	000000
						2"	3 9/32"	2 1/4"	7 15/32"	5 1/2"	70,000	ASME B30.26	0000000	000000
						2 1/2"	4 1/8"	2 3/4"	10 1/2"	7 1/4"	110,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000000




								High-Strength Galvanized Alloy Steel

								3/8"	11/16"	15/32"	1 13/32"	1"	4,000	ASME B30.26	0000000	00000


								7/16"	23/32"	1/2"	1 11/16"	1 3/16"	5,200	ASME B30.26	0000000	00000
								1/2"	27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	0000000	00000
								5/8"	1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	0000000	00000
								3/4"	1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	0000000	00000
								7/8"	1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	0000000	00000
								1"	1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	0000000	00000
								1 1/8"	1 27/32"	1 1/4"	4 1/32"	2 11/16"	30,000	ASME B30.26	0000000	000000
								1 1/4"	2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	0000000	000000
1 1/2"								2 7/16"	1 21/32"	5 21/32"	3 1/2"	50,000	ASME B30.26	0000000	000000
1 5/8"	2 21/32"							1 3/4"	6 1/8"	4 1/8"	58,000	ASME B30.26	0000000	000000


1 3/4"	2 31/32"							2"	7"	4 3/4"	68,000	ASME B30.26	0000000	000000
2"	3 9/32"	2 1/4"						7 15/32"	5 1/2"	86,000	ASME B30.26	0000000	000000




		Highly-Corrosion-Resistant 316 Stainless Steel

		3/16"	13/32"					1/4"	27/32"	19/32"	650	ASME B30.26, Fed. Spec. RR-C-271	0000000	0000


		1/4"	15/32"					5/16"	1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		5/16"	17/32"					3/8"	1 7/32"	13/16"	1,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		3/8"	21/32"					7/16"	1 7/16"	31/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		7/16"	23/32"					1/2"	1 25/32"	1 1/16"	2,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		1/2"	13/16"					5/8"	1 27/32"	1 7/32"	3,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		5/8"	1 1/32"					3/4"	2 7/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		3/4"	1 1/4"					7/8"	2 27/32"	1 29/32"	6,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		7/8"	1 15/32"					1"	3 5/16"	2 7/32"	8,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
		1"	1 11/16"					1 1/8"	3 13/16"	2 5/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
		1 1/4"	2 1/32"	1 3/8"				4 11/16"	3 5/16"	14,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000


		Safety Cotter Pin







								Black-Oxide Steel

								1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000


								5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
								3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
								7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
								1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
								5/8"	1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
								3/4"	1 1/4"	7/8"	3"	2"	9,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
								7/8"	1 7/16"	1"	3 1/4"	2 5/8"	13,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
								1"	1 11/16"	1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000




							Galvanized Steel

							3/16"		3/8"	1/4"	29/32"	5/8"	700	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000


							1/4"		1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
							5/16"		17/32"	13/32"	1 1/4"	27/32"	1,600	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
							3/8"		11/16"	15/32"	1 15/32"	1 1/32"	2,200	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
							7/16"		3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
							1/2"		13/16"	21/32"	1 29/32"	1 5/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
							5/8"		1 1/16"	25/32"	2 13/32"	1 23/32"	7,100	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
							3/4"		1 1/4"	29/32"	2 13/16"	2"	10,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
							7/8"		1 15/32"	1 1/32"	3 5/16"	2 9/32"	14,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
							1"		1 23/32"	1 5/32"	3 3/4"	2 23/32"	18,700	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
							1 1/8"		1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000


							1 1/4"		2 1/32"	1 13/32"	4 21/32"	2 29/32"	24,000	ASME B30.26	0000000	000000
							1 3/8"		2 1/4"	1 1/2"	5 7/32"	3 1/4"	27,000	ASME B30.26	0000000	000000
							1 1/2"		2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	0000000	000000
1 3/4"							2 31/32"		2"	7"	4 3/4"	50,000	ASME B30.26	0000000	000000
2"	3 9/32"						2 1/4"		7 15/32"	5 1/2"	70,000	ASME B30.26	0000000	000000




							High-Strength Galvanized Alloy Steel

							1/2"		27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	0000000	00000


							5/8"		1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	0000000	00000
							3/4"		1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	0000000	000000
							7/8"		1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	0000000	000000
							1"		1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	0000000	000000
							1 1/8"		1 27/32"	1 1/4"	4"	2 11/16"	30,000	ASME B30.26	00000000	000000
							1 1/4"		2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	0000000	000000
							1 1/2"		2 7/16"	1 21/32"	5 21/32"	3 1/2"	60,000	ASME B30.26	0000000	000000
							1 5/8"		2 21/32"	1 3/4"	6 1/8"	4 1/8"	70,000	ASME B30.26	0000000	000000
							1 3/4"		2 31/32"	2"	7"	4 3/4"	80,000	ASME B30.26	0000000	000000
		2"					3 9/32"		2 1/4"	7 15/32"	5 1/2"	100,000	ASME B30.26	0000000	00000000




				Highly-Corrosion-Resistant 316 Stainless Steel

				1/4"	1/2"		5/16"		1 1/8"	3/4"	1,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000


				5/16"	17/32"		3/8"		1 7/32"	13/16"	1,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				3/8"	11/16"		7/16"		1 7/16"	31/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				7/16"	3/4"		1/2"		1 25/32"	1 1/16"	2,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				1/2"	27/32"		5/8"		1 27/32"	1 7/32"	3,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				5/8"	1 1/32"		3/4"		2 7/16"	1 1/2"	4,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				3/4"	1 1/4"		7/8"		2 27/32"	1 3/4"	6,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
				7/8"	1 1/2"		1"		3 5/16"	2"	8,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
				1"	1 23/32"		1 1/8"		3 13/16"	2 5/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
				1 1/4"	2 1/32"		1 3/8"		4 11/16"	3 5/16"	14,000	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000


				Flush Hammer-Set-Dowel Pin







								High-Strength Powder-Coated Alloy Steel

								7/16"	7/8"	9/16"	1 13/16"	1 3/32"	7,100	ASME B30.26	0000000	00000


								9/16"	1 3/32"	3/4"	2 9/16"	1 11/32"	12,000	ASME B30.26	0000000	00000
								11/16"	1 11/32"	15/16"	3"	1 5/8"	18,100	ASME B30.26	0000000	00000
								13/16"	1 19/32"	1 7/32"	3 13/32"	1 15/16"	28,300	ASME B30.26	0000000	000000
								1 1/16"	2"	1 7/32"	4 1/4"	2 11/16"	35,900	ASME B30.26	0000000	000000
								1 5/16"	1 27/32"	1 7/16"	4 3/8"	1 27/32"	34,200	ASME B30.26	0000000	000000

D-Type Shackles for Lifting

The best choice for lifting with chain. The bow and pin are equally wide to keep chain links from sliding or moving and support heavier vertical loads than anchor shackles. However, they're rated for vertical lifting only, as side loading might deform the bow. All meet ASME specifications for use with rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as chain shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Galvanized Steel—A thick coating protects these shackles in wet and outdoor environments better than black-oxide steel. However, they corrode when exposed to salt water and chemicals.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

Highly-Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met		Each
Screw Pin







				Galvanized Steel

				1/4"	1/2"	5/16"	29/32"	1/2"	1,500	ASME B30.26	0000000	000000


				5/16"	9/16"	13/32"	1 1/32"	9/16"	2,000	ASME B30.26	0000000	00000
				3/8"	11/16"	15/32"	1 1/4"	11/16"	3,000	ASME B30.26	0000000	00000
				7/16"	3/4"	1/2"	1 1/2"	3/4"	3,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				1/2"	13/16"	21/32"	1 11/16"	13/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				5/8"	1 1/16"	3/4"	2 1/16"	1 1/16"	7,100	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				3/4"	1 1/4"	29/32"	2 13/32"	1 1/4"	10,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				7/8"	1 15/32"	1"	2 7/8"	1 7/16"	14,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
				1"	1 23/32"	1 5/32"	3 1/4"	1 11/16"	18,700	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
				1 1/8"	1 13/16"	1 1/4"	3 9/16"	1 13/16"	24,000	ASME B30.26	0000000	000000
				1 1/4"	2 1/32"	1 13/32"	4"	2"	26,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000


				1 3/8"	2 1/4"	1 1/2"	4 15/32"	2 1/4"	34,000	ASME B30.26	0000000	000000
				1 1/2"	2 13/32"	1 21/32"	4 29/32"	2 13/32"	40,000	ASME B30.26	0000000	000000
				1 3/4"	2 29/32"	2"	5 3/4"	2 29/32"	60,000	ASME B30.26	0000000	000000
				2"	3 9/32"	2 1/4"	6 3/4"	3 9/32"	70,000	ASME B30.26	0000000	000000




						Highly-Corrosion-Resistant 316 Stainless Steel

						1/4"	15/32"	5/16"	7/8"	15/32"	1,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	0000


						5/16"	17/32"	13/32"	1 1/32"	17/32"	1,300	ASME B30.26, Fed. Spec. RR-C-271	000000000	0000
						3/8"	21/32"	15/32"	1 1/4"	21/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000
						7/16"	3/4"	1/2"	1 7/16"	3/4"	2,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000
						1/2"	13/16"	21/32"	1 19/32"	13/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000
						5/8"	1 1/16"	3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000
						3/4"	1 7/32"	29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000
						7/8"	1 15/32"	1"	2 29/32"	1 15/32"	8,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	000000
						1"	1 11/16"	1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	000000


						Safety Cotter Pin







										Galvanized Steel

										1/4"	1/2"	5/16"	15/16"	7/16"	1,100	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000


										5/16"	17/32"	13/32"	1 3/32"	1/2"	1,600	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
										3/8"	11/16"	15/32"	1 9/32"	5/8"	2,200	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
										7/16"	3/4"	1/2"	1 1/2"	3/4"	3,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
										1/2"	13/16"	21/32"	1 11/16"	13/16"	4,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
5/8"										1 1/16"	25/32"	2 1/16"	1 1/16"	7,100	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
3/4"	1 1/4"									29/32"	2 13/32"	1 1/4"	10,400	ASME B30.26, Fed. Spec. RR-C-271	0000000	00000
7/8"	1 15/32"									1 1/32"	2 7/8"	1 7/16"	14,300	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000
1"	1 23/32"									1 5/32"	3 1/4"	1 11/16"	18,700	ASME B30.26, Fed. Spec. RR-C-271	0000000	000000




		High-Strength Galvanized Alloy Steel

		1/4"	15/32"							5/16"	7/8"	15/32"	1,500	ASME B30.26	0000000	00000


		5/16"	17/32"							13/32"	1"	17/32"	2,000	ASME B30.26	0000000	00000
		3/8"	21/32"							15/32"	1 1/4"	21/32"	3,000	ASME B30.26	0000000	00000
		1/2"	13/16"							21/32"	1 11/16"	13/16"	6,000	ASME B30.26	0000000	00000
		5/8"	1 1/16"							3/4"	2"	1 1/16"	9,000	ASME B30.26	0000000	00000
		3/4"	1 1/4"							29/32"	2 3/8"	1 1/4"	13,000	ASME B30.26	0000000	00000
		7/8"	1 7/16"							1"	2 7/8"	1 7/16"	17,000	ASME B30.26	0000000	000000
		1 1/8"	1 13/16"							1 1/4"	3 9/16"	1 13/16"	24,000	ASME B30.26	0000000	000000
		1 1/4"	2 1/32"							1 13/32"	3 31/32"	2 1/32"	28,000	ASME B30.26	0000000	000000
		1 3/8"	2 1/4"							1 1/2"	4 15/32"	2 1/4"	34,000	ASME B30.26	0000000	000000
		1 1/2"	2 13/32"							1 21/32"	4 29/32"	2 13/32"	40,000	ASME B30.26	0000000	000000


		1 3/4"	2 29/32"							2"	5 3/4"	2 29/32"	60,000	ASME B30.26	0000000	000000
		2"	3 9/32"							2 1/4"	6 3/4"	3 9/32"	70,000	ASME B30.26	0000000	000000




				Highly-Corrosion-Resistant 316 Stainless Steel

				3/8"	21/32"					15/32"	1 1/4"	21/32"	1,500	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000


				1/2"	13/16"					21/32"	1 19/32"	13/16"	3,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000
				5/8"	1 1/16"					3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	00000
				3/4"	1 7/32"					29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	000000
				7/8"	1 15/32"					1"	2 29/32"	1 15/32"	8,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	000000
				1"	1 11/16"					1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26, Fed. Spec. RR-C-271	000000000	000000

Flat Shackles for Lifting

Screw Pin

Safety Cotter Pin

Lift with web slings. The wide, flat bow on these shackles prevents your sling from folding or bunching to keep loads distributed equally. All meet ASME specifications for rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as webbing shackles. Optional spools fit on the pin to center attachments and keep rope from sliding across the pin.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

High-Strength Painted Alloy Steel—The paint provides some corrosion resistance, but can chip or wear away over time.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

	Shackles										Optional Spools
	For Web Wd.	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met		Each		Each
Screw Pin







				High-Strength Painted Alloy Steel

				1"	3/4"	29/32"	3/4"	1 1/2"	1 13/32"	6,500	ASME B30.26	0000000	000000	00000000	000000


				1 1/2"	1"	1 1/4"	29/32"	1 29/32"	1 3/4"	13,000	ASME B30.26	0000000	00000	00000000	00000
				2"	1 1/8"	1 13/32"	1"	2 13/16"	2 1/4"	17,500	ASME B30.26	0000000	00000	00000000	00000
				3"	1 3/8"	1 5/8"	1 1/4"	3 1/16"	3 1/4"	25,000	ASME B30.26	0000000	000000	00000000	00000
				4"	1 3/4"	2 1/8"	1 1/2"	5 1/4"	4 1/2"	41,000	ASME B30.26	0000000	000000	00000000	00000
				5"	2 1/4"	2 1/2"	2"	6 11/32"	5 1/2"	70,000	ASME B30.26	0000000	000000	00000000	00000
				6"	2 3/4"	3"	2 1/4"	7 23/32"	6 1/2"	100,000	ASME B30.26	0000000	00000000	00000000	000000


				Safety Cotter Pin







								High-Strength Painted Alloy Steel

								1"	9/16"	1 1/16"	3/4"	1 1/2"	1 13/32"	6,500	ASME B30.26	00000000	00000	00000000	00000


								1 1/2"	3/4"	1 1/4"	29/32"	1 29/32"	1 3/4"	13,000	ASME B30.26	00000000	00000	00000000	00000
								2"	7/8"	1 13/32"	1"	2 13/16"	2 1/4"	17,500	ASME B30.26	00000000	000000	00000000	00000
								3"	1 5/16"	1 5/8"	1 1/4"	3 1/16"	3 1/4"	25,000	ASME B30.26	00000000	000000	00000000	00000
								4"	1 3/8"	2 1/8"	1 1/2"	5 1/4"	4 1/2"	41,000	ASME B30.26	00000000	000000	00000000	00000
								5"	1 3/4"	2 1/2"	2"	6 11/32"	5 1/2"	70,000	ASME B30.26	00000000	000000	00000000	00000




										High-Strength Galvanized Alloy Steel

										2"	11/16"	1 1/4"	29/32"	3 17/32"	2 1/2"	15,400	ASME B30.26	0000000	000000	———	0


										3"	15/16"	1 11/16"	1 5/32"	4 5/8"	3 1/4"	27,500	ASME B30.26	0000000	000000	———	0
										3 1/2"	1 7/32"	2 1/32"	1 13/32"	5 13/16"	4"	39,600	ASME B30.26	0000000	000000	———	0

Dual-Connect Shackles for Lifting

Flush

Hammer-Set-Dowel

Flush

Hammer-Set-Dowel

Pin/Safety Cotter

Attach chain to pins on both ends of these shackles—no extra hardware needed. Connect them to two lengths of chain or use them as a stable, inline connection in a lifting system. All meet ASME specifications for use with rigging and lifting equipment.

Note: Capacity limits are based on loads applied in line with a straight length of rope or chain. Test all assemblies for required strength before use.

Hammer-Set-Dowel Pin—Hammer in two dowel pins to hold the pin in place. These shackles stay put even under heavy, shifting loads and in long-term rigging setups. They also won't snag on clothing or other nearby material.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, they won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

	Top Opening			Bottom Opening
	Opening Wd.	Pin Dia.	Inside Lg.	Opening Wd.	Pin Dia.	Inside Lg,	Wt. Cap., lb.	Specs. Met		Each
Flush Hammer-Set-Dowel Pin







				High-Strength Powder-Coated Alloy Steel

				15/32"	15/32"	1/2"	27/32"	5/8"	1 7/16"	7,100	ASME B30.26	0000000	0000000


				5/8"	5/8"	19/32"	1 3/32"	25/32"	1 15/16"	12,000	ASME B30.26	0000000	000000
				11/16"	3/4"	27/32"	1 5/16"	15/16"	2 7/32"	18,100	ASME B30.26	0000000	000000


				Flush Hammer-Set-Dowel Pin/Safety Cotter Pin







								High-Strength Powder-Coated Alloy Steel

								15/32"	15/32"	1/2"	27/32"	5/8"	1 7/16"	7,100	ASME B30.26	0000000	000000


								5/8"	5/8"	19/32"	1 3/32"	25/32"	1 15/16"	12,000	ASME B30.26	0000000	000000
								11/16"	3/4"	27/32"	1 5/16"	15/16"	2 7/32"	18,100	ASME B30.26	0000000	000000

Flexible Shackles for Lifting

A flexible and lightweight option for lifting. Made of polyethylene rope with a nylon cover, these shackles wrap around a variety of lifting points without marring surfaces. All meet ASME specifications for rigging and lifting equipment. To close them, pull the bar through the loop and slide the rubber lock over each end of the bar. Keep these shackles away from sharp edges, which could cause them to break and fail.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Specs. Met		Each







Polyethylene Rope with Nylon Fabric Cover

9/16"	4"	3,300	ASME B30.26	0000000	000000


9/16"	8"	3,300	ASME B30.26	0000000	00000
21/32"	5"	5,200	ASME B30.26	0000000	00000
21/32"	10"	5,200	ASME B30.26	0000000	00000
3/4"	5"	6,700	ASME B30.26	0000000	00000
3/4"	10"	6,700	ASME B30.26	0000000	00000
15/16"	5"	8,600	ASME B30.26	0000000	00000
15/16"	10"	8,600	ASME B30.26	0000000	00000