More durable than plastic caps, these provide the most protection from abrasion and impact.

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Slide these caps over a tool handle or other round object and use the eye to hang it.

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Guard the corners of fragile materials such as glass and mirrors.

Slide these flexible vinyl caps on and they conform for a snug fit.

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

Stretch these caps over flared edges such as flanged tubing and valve handles.

Give open-ended standoffs a finished look and protect them from dirt and debris.

A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.

These fiberglass bellows withstand temperatures up to 450° F—about twice as much as standard breathable round bellows with flange ends. They also protect against flames and sparks.

No need to disassemble equipment—these bellows wrap around moving parts. Sewn seams let them breathe, so they retract quickly in fast-cycling applications.

Thinner than other round bellows with cuff ends, these flexible bellows are meant for light duty applications.

These thick, rigid bellows provide excellent durability.

Sewn seams let these bellows breathe, so they retract quickly in fast-cycling applications.

Attach the cuff end with a hose clamp and screw mount the flange end.

Attach the cuff end with a hose clamp, and screw mount the flange end.

Secure the cuff ends with hose clamps.

Slide these bellows over flat moving surfaces on machinery, such as guideways.

These bellows withstand temperatures up to 500° F—more than twice as much as standard flat bellows.

Slip these bellows over hydraulic cylinder rods to keep them free from debris for a long service life.

Also known as linear way covers, these bellows install on guide rails to protect the rails as carriages move across them.

Install these bellows over gas springs to protect their piston rods.

Slide these protectors over gas springs to keep debris out of their seals.

Protect U-joints to keep lubricants in and contaminants out.

These sleeves contain a corrosion inhibitor to shield metal parts from corrosion.

These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart.

These tubes have one sealed end and one end that closes with a cap.

Because of their square shape, these tubes won't roll away. They can be stacked, and the flat surface is easier to label than a round surface.

Slide the 6" long cap onto one end; the other end has a permanent steel cap.

Shield couplings and bearings from dirt and debris while protecting fingers and tools from moving parts.

Use these retaining caps to secure the ends of quick-release pins in holes that are oversized or out of round.