Rollers have diameters between 2" and 3 1/2".

These rollers have diameters 1 3/4" and below.

Choose the width you need from 6" to 60" in 1/16" increments.

These rollers have 0.78" diameters.

Choose the width you need from 6" to 60" in 1/16" increments.

Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.

Rubber-covered axles eliminate metal-to-metal contact to prevent frame wear and reduce noise.

Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.

Rollers have a standard 1.9" diameter to fit most roller conveyors.

" Rollers are grooved to accommodate round belts on line-shaft conveyors."

Connect to other rollers with two grooves to power a gravity conveyor or build a custom powered conveyor.

These rollers have 2 1/2" diameters.

Replace rollers on a chain-driven conveyor.

Replace worn and damaged bearings or press-fit bearings into tubing or pipe to create a roller.

Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe create a roller. All have a hex-shaped axle.

Clips clamp onto the shaft to keep spools from slipping, preventing wear on the belt.