System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Length Length |
|---|
Shape Shape |
|---|
 |  |
| Rod and Disc | Wire |
Appearance Appearance |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
|
Specifications Met Specifications Met |
|---|
|
|
Hardness Hardness |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
|
Certificate Certificate |
|---|
 | |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Temper Rating Temper Rating |
|---|
|
Fabrication Fabrication |
|---|
|
|
Yield Strength Yield Strength |
|---|
|
About Copper, Brass, and Bronze
More
About Tool Steel
More
About Stainless Steel
More
About Aluminum
More
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
View a wire gauge conversion chart.
Lubricated 1080 Spring Steel Wire
- Heat Treatment: Hardened
- Tensile Strength: 261,000 psi
- Specifications Met: ASTM A228
Also known as music wire. This wire is coated with phosphate for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Heat Treatment | Temperature Range | Pkg. Qty. | Pkg. | |
| 0.02" | -0.0005" to 0.0005" | Hardened | Not Rated | 100 | 0000000 | 00000 |
Spring-Back Multipurpose 304 Stainless Steel Wire
This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.
PTFE-coated wire has a slippery surface, so it’s especially useful as a fish wire when navigating through confined spaces.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
- Heat Treatment: Hardened
- Tensile Strength: 205,000 psi
- Specifications Met: ASTM A313, ASTM A555
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Mirror-Like | ||||||
| 0.02" | -0.001" to 0.001" | Cold Drawn | 570° | 100 | 0000000 | 000000 |
- Heat Treatment: Hardened
- Tensile Strength: Not Rated
- Specifications Met: ASTM A313
68" Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Finish Color | Max. Temperature, °F | Each | |
| 0.02" | -0.001" to 0.001" | Gray | 500° | 0000000 | 000000 |
Bend-and-Stay Multipurpose 304 Stainless Steel Wire
Bend this wire and it will stay put. Frequently used as tying wire and locking wire, 304 stainless steel is a good all-around choice for a wide range of applications.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580
| Dia. | Dia. Tolerance | Lg., ft. | Fabrication | Max. Temperature, °F | Weight, lb. | Container Type | Each | |
Matte | ||||||||
|---|---|---|---|---|---|---|---|---|
| 0.02" | -0.0005" to 0.0005" | 230 | Cold Drawn | 550° | 1/4 | Spool | 0000000 | 00000 |
| 0.02" | -0.0005" to 0.0005" | 930 | Cold Drawn | 550° | 1 | Can | 0000000 | 00000 |
| 0.02" | -0.0005" to 0.0005" | 4,655 | Cold Drawn | 550° | 5 | Spool | 0000000 | 00000 |
| 0.02" | -0.0005" to 0.0005" | 9,310 | Cold Drawn | 550° | 10 | Spool | 0000000 | 000000 |
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580
1 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Matte | ||||||
| 0.02" | -0.0005" to 0.0005" | Cold Drawn | 550° | 50 | 0000000 | 00000 |
Bend-and-Stay Corrosion-Resistant 316 Stainless Steel Wire
Bend this wire and it will stay in place. It's widely used as tying and locking wire. Made of 316/316L stainless steel, it has less carbon than standard 316 for better weldability. The addition of molybdenum gives this material excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580
30 ft. Lg. | ||||
|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Each | |
Mirror-Like | ||||
| 0.02" | -0.001" to 0.001" | 400° | 000000000 | 000000 |
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Tensile Strength: 75,000 psi
- Specifications Met: ASTM A580
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Max. Temperature, °F | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
| 0.02" | -0.001" to 0.001" | 400° | 25 | 000000000 | 00000 |
Spring-Back Corrosion-Resistant 316 Stainless Steel Wire
- Heat Treatable: No
- Tensile Strength: 222,000 psi
- Specifications Met: ASTM A313
This wire will spring back after bending. It's often used to make springs and wire rope. The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 0.02" | -0.0002" to 0" | 76 | 7/8" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.02" | 0" to 0.0002" | 76 | 7/8" | -1/32" to 1/32" | Precision Ground | 0.012" per ft. | 00000000 | 00000 |
Easy-to-Form 1100 Aluminum Wire
- Yield Strength: 3,500 psi
- Hardness: Not Rated (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Drawn
- Specifications Met: ASTM B211
This wire has a soft temper and will stay in place when bent. Use it as tie wire and for bundling. Because 1100 aluminum is 99% pure, it offers superior formability, corrosion resistance, and electrical conductivity.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | Lg., ft. | Heat Treatment | Max. Temperature, °F | Tensile Strength, psi | Weight, lb. | Container Type | Each | |
| 0.020" | -0.001" to 0.001" | 680 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 000000 |
| 0.020" | -0.001" to 0.001" | 2,725 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.020" | -0.001" to 0.001" | 13,635 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
1 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Heat Treatment | Max. Temperature, °F | Tensile Strength, psi | Pkg. Qty. | Pkg. | |
| 0.020" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 000000 |
Ultra-Formable 260 Brass Rods
- Yield Strength:
Inch sizes: Not Rated
Metric sizes: 9,000 psi - Hardness: Not Rated
- Temper:
Inch sizes: H02 (1/2 Hard) to H03 (3/4 Hard)
Metric sizes: H01 (1/4 Hard) to H02 (1/2 Hard) - Heat Treatable: No
- Specifications Met: ASTM B134
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | ||||
|---|---|---|---|---|
| Dia. | Dia. Tolerance Range | Pkg. Qty. | Pkg. | |
| 0.02" | -0.002" to 0.002" | 5 | 00000000 | 00000 |
Ultra-Formable 260 Brass Wire
- Temper Rating: Softened (Annealed)
- Heat Treatable: No
- Tensile Strength: 50,000 psi
- Specifications Met: ASTM B134
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. 260 brass is sometimes called cartridge brass. This wire has a soft temper and stays in place when bent.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Mirror-Like Multipurpose 110 Copper Wire
- Temper Rating: Softened (Annealed)
- Heat Treatable: No
- Tensile Strength: 29,000 psi
- Specifications Met: ASTM B3
This wire is polished to a mirror-like finish. Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used as grounding wire. It has a soft temper and will stay in place when bent.
Tin-Coated Multipurpose 110 Copper Wire
- Temper Rating: Softened (Annealed)
- Heat Treatable: No
- Tensile Strength: 29,000 psi
- Specifications Met: ASTM B3
The tin coating provides a higher level of corrosion resistance and makes it easier to solder than Mirror-Like Multipurpose 110 Copper Wire. Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used as grounding wire. This wire has a soft temper and will stay in place when bent.
High-Temperature Nickel-Clad Copper
- Temper Rating: Softened (Annealed)
- Tensile Strength: 80,000 psi
- Specifications Met: ASTM B355
This copper wire is clad in nickel to provide excellent corrosion resistance at temperatures up to 1200° F while maintaining high electrical conductivity. It has a soft temper and will stay in place when bent.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
High-Temperature Ultra-Dense Tungsten Rods
- Maximum Temperature: 2,300° F
- Yield Strength: Not Rated
- Hardness: Rockwell C35 (Hard)
- Temper Rating: Not Rated
Ultra dense for use as electrodes, furnace support pillars, and screws and bolts, these chemically pure tungsten rods withstand greater heat than other high-temperature metal, such as molybdenum. You can also use them in applications where voltage increases may cause temperature spikes that other metal can’t handle. These rods won’t deform in high heat, so they last longer than other metal. However, they’re harder to machine than more ductile tungsten alloys. These rods won’t corrode from chemicals or weather.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Corrosion-Resistant Tungsten Wire
- Temper: Spring (Hardened)
- Tensile Strength: Not Rated
- Specifications Met: ASTM F288
This wire will spring back after bending. It's often used in heating and electrical applications. The addition of copper and nickel makes this tungsten more corrosion resistant than tungsten carbide.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Super-Elastic Nitinol Wire
- Temper: Spring (Hardened)
- Tensile Strength: 181,000 psi
Commonly used for eyeglass frames and antennas, this wire bounces back to its original shape after bending, stretching, and twisting. Nitinol is a nickel-titanium alloy.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | Finish | Specifications Met | Pkg. Qty. | Pkg. | |
| 0.02" | -0.0004" to 0.0004" | Black Oxide | ASTM F2063 | 5 | 0000000 | 000000 |
Shape-Memory Nitinol Wire
- Temper Rating: Softened
- Tensile Strength: 157,500 psi
- Specifications Met: ASTM F2063
Bend this wire and it will hold its shape until you heat it. It is commonly used in automotive switches and latches. Nitinol is a nickel-titanium alloy.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Multipurpose 400 Nickel Wire
- Temper Rating: Softened (Annealed)
- Tensile Strength: 70,000 psi
- Specifications Met: ASTM B164
Bend this wire and it will stay in place. It is often used as safety lock wire. From marine hardware to chemical-processing equipment, 400 nickel is widely used for its strength, weldability, and formability. Comparable to Monel, this nickel-copper alloy will stand up to highly corrosive environments, such as those involving salt water, sulfuric acid, and alkalies.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Easy-to-Form Nickel Chromium Alloy
- Temper Rating: Softened
- Tensile Strength: 100,000 psi
- Specifications Met: ASTM B267, ASTM B344
Bend this wire and it will stay in place. This nickel-chromium, often called Chromel C, provides effortless formability. Use it for heating elements, resistance windings, and hot-wire cutters.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Electrical Resistivity | Lg., ft. | Each | |
1/8 lb. Spool | |||||||
|---|---|---|---|---|---|---|---|
Mirror-Like | |||||||
| 0.02" | -0.001" to 0.001" | Cold Worked | 1800° | 1.671 ohms/ft | 110 | 0000000 | 000000 |
1/4 lb. Spool | |||||||
Mirror-Like | |||||||
| 0.02" | -0.001" to 0.001" | Cold Worked | 1800° | 1.671 ohms/ft | 220 | 0000000 | 00000 |
1 lb. Spool | |||||||
Mirror-Like | |||||||
| 0.02" | -0.001" to 0.001" | Cold Worked | 1800° | 1.671 ohms/ft | 890 | 0000000 | 00000 |
High-Temperature 600 Nickel
- Temper Rating: Softened (Annealed)
- Tensile Strength: 80,000 psi
- Specifications Met: ASTM B166
Bend this wire and it will stay in place. Able to withstand temperatures up to 1000° F, 600 nickel is often used as safety lock wire in high-temperature applications. It is comparable to Inconel.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Platinum Wire
- Hardness: Rockwell B97 (Medium)
Use this 99.95% pure platinum wire to create thermocouple probes and other parts that maintain high accuracy in extreme conditions. It won’t oxidize, won’t corrode in most settings, and has low thermal and electrical resistance. Platinum is often used to make O-rings, even for high-vacuum applications, because it’s soft enough to form a good seal when pressed between two flanges, yet won’t damage the flanges so you can reuse them. It’s also useful with high temperatures since it has a higher melting point than other sealing materials, such as gold.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Tantalum Wire
- Hardness: Rockwell C69 (Ultra Hard)
Harder than platinum and able to withstand higher temperatures than gold, this 99.98% pure tantalum wire also resists corrosion and conducts heat. It’s often used in heating elements for furnaces.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.