0.033" Shafts | McMaster-Carr

Also known as music wire. This wire is coated with phosphate for corrosion resistance and lubricity. Use it for bundling and as tag wire. It will spring back after bending.

1/4 lbs. Coil
Dia.	Dia. Tolerance	Heat Treatment	Temperature Range	Lg., ft.		Each
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	86	0000000	00000
1 lbs. Coil
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	340	0000000	00000
5 lbs. Coil
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	1,720	0000000	00000

					1 ft. Lg.
Dia.	Dia. Tolerance	Heat Treatment	Temperature Range	Pkg. Qty.		Pkg.
0.033"	-0.0005" to 0.0005"	Hardened	Not Rated	100	0000000	000000

Hardened Undersized High-Speed M2 Tool Steel Rods

Yield Strength: See table
Hardness: Rockwell C60 (Very Hard)

These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

Dia.	Dia. Tolerance	Drill Bit Size	Lg.	Yield Strength	Mechanical Finish	Straightness Tolerance		Each
0.033"	-0.0002" to 0"	66	1 3/8"	Not Rated	Precision Ground	0.012" per ft.	00000000	00000

Hardened Oversized High-Speed M2 Tool Steel Rods

Yield Strength: Not Rated
Hardness: Rockwell C60 (Very Hard)

Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia.	Dia. Tolerance	Reamer Size	Lg.	Lg. Tolerance	Mechanical Finish	Straightness Tolerance		Each
0.033"	0" to 0.0002"	66	1 3/8"	-1/32" to 1/32"	Precision Ground	0.012" per ft.	00000000	00000

Spring-Back Multipurpose 304 Stainless Steel Wire

This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.

PTFE-coated wire has a slippery surface, so it’s especially useful as a fish wire when navigating through confined spaces.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Coils

Coil

Heat Treatment: Hardened
Tensile Strength: 205,000 psi
Specifications Met: ASTM A313, ASTM A555

				1/4 lbs. Coil			1 lbs. Coil
Dia.	Dia. Tolerance	Fabrication	Max. Temperature, °F	Lg., ft.		Each	Lg., ft.		Each
Matte
0.033"	-0.0008" to 0.0008"	Cold Drawn	570°	86	0000000	00000	340	0000000	000000

1-ft. Lengths

1-ft. Length

Heat Treatment: Hardened
Tensile Strength: 205,000 psi
Specifications Met: ASTM A313, ASTM A555

					1 ft. Lg.
Dia.	Dia. Tolerance	Fabrication	Max. Temperature, °F	Pkg. Qty.		Pkg.
Matte
0.033"	-0.001" to 0.001"	Cold Drawn	570°	100	0000000	000000

PTFE-Coated Wire

PTFE-Coated Wire (68" Length)

Heat Treatment: Hardened
Tensile Strength: Not Rated
Specifications Met: ASTM A313

				68" Lg.
Dia.	Dia. Tolerance	Finish Color	Max. Temperature, °F		Each
0.033"	-0.0005" to 0.0005"	Gray	500°	0000000	000000