System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Shape Shape |
|---|
 | Rod and Disc |
Material Material |
|---|
|
Appearance Appearance |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Fabrication Fabrication |
|---|
|
Elongation Elongation |
|---|
|
Mechanical Finish Mechanical Finish |
|---|
|
Yield Strength Yield Strength |
|---|
|
Hardness Hardness |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Length Length |
|---|
|
Reamer Size Reamer Size |
|---|
|
Drill Bit Size Drill Bit Size |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
About Tool Steel
More
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 0.052" | -0.0002" to 0" | 55 | 1 7/8" | Precision Ground | 0.001" | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.052" | 0" to 0.0002" | 55 | 1 7/8" | -1/32" to 1/32" | Precision Ground | 0.001" | 00000000 | 00000 |