System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Shape Shape |
|---|
 | Rod and Disc |
Tolerance Rating Tolerance Rating |
|---|
|
|
Hardness Rating Hardness Rating |
|---|
|
Fabrication Fabrication |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Performance Properties Performance Properties |
|---|
|
Friction Rating Friction Rating |
|---|
|
Comparable To Comparable To |
|---|
|
Electrical Insulation Rating Electrical Insulation Rating |
|---|
|
Flexural Modulus Flexural Modulus |
|---|
|
For Use Outdoors For Use Outdoors |
|---|
|
Impact Strength Impact Strength |
|---|
|
Impact Strength Rating Impact Strength Rating |
|---|
|
Tensile Strength Rating Tensile Strength Rating |
|---|
|
Texture Texture |
|---|
 | Smooth |
Thermal Stability Thermal Stability |
|---|
|
Water Absorption Rating Water Absorption Rating |
|---|
|
Yield Strength Yield Strength |
|---|
|
Appearance Appearance |
|---|
|
Elongation Elongation |
|---|
|
About Plastic
More
About Tool Steel
More
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 0.07" | -0.0002" to 0" | 50 | 2" | Precision Ground | 0.001" | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.07" | 0" to 0.0002" | 50 | 2" | -1/32" to 1/32" | Precision Ground | 0.001" | 00000000 | 00000 |
Chemical-Resistant Slippery PTFE Rods and Discs
- Color: White
- Temperature Range: See table
- Tensile Strength: See table (Poor)
- Impact Strength: 3.5 ft.-lbs./in. (Good)
- Hardness: See table (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: See table
These rods and discs are made of PTFE, a material that surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures. In addition to resisting most solvents, they are an excellent electrical insulator. They are easy to machine and have a naturally slippery surface that makes them a good choice for bearings, gears, and parts that slide and roll.