System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
Shape Shape |
|---|
 |  |
| Rod and Disc | Wire |
Container Type Container Type |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Material Material |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Elongation Elongation |
|---|
|
Hardness Hardness |
|---|
|
Fabrication Fabrication |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Weight Weight |
|---|
|
Temper Temper |
|---|
|
Yield Strength Yield Strength |
|---|
|
Mechanical Finish Mechanical Finish |
|---|
|
Drill Bit Size Drill Bit Size |
|---|
|
Reamer Size Reamer Size |
|---|
|
About Stainless Steel
More
About Tool Steel
More
View a wire gauge conversion chart.
Spring-Back Multipurpose 304 Stainless Steel Wire
This wire bounces back after bending. Often used to construct springs and wire rope, 304 stainless steel is a good all-around choice for a wide range of applications.
- Heat Treatment: Hardened
- Tensile Strength: 205,000 psi
- Specifications Met: ASTM A313, ASTM A555
1 lb. Coil | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Fabrication | Max. Temperature, °F | Lg., ft. | Each | |
Matte | ||||||
| 0.086" | -0.001" to 0.001" | Cold Drawn | 570° | 50 | 0000000 | 000000 |
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 0.086" | -0.0002" to 0" | 44 | 2 1/8" | Precision Ground | 0.001" | 00000000 | 00000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.086" | 0" to 0.0002" | 44 | 2 1/8" | -1/32" to 1/32" | Precision Ground | 0.001" | 00000000 | 00000 |