The matte plating on these rods increases corrosion resistance and wear resistance.

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

While the low carbon content makes 8620 alloy steel easy-to-weld, it's the nickel, chromium, and molybdenum content that provides wear resistance.

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

When compared to standard 304 stainless steel, this material can be machined faster with less wear on cutting tools. It's also called Prodec and Project 70+.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

A traceable lot number and test report is furnished with each piece.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

These precision-ground rods are ready for turning in a lathe. They're furnished with a traceable lot number and test report.

One of the most machinable types of stainless steel available, 416 contains sulfur for fast machining without clogging cutting tools. It's used for gears, screws, and shafts.

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

These rods come with a traceable lot number and test report.

Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance.

These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.

Ready for turning in a lathe, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance.

Ground and held to strict diameter and straightness tolerances, these rods are ready to be turned in a lathe.

Hardened for increased abrasion and impact resistance, these rods are precision ground with a tight diameter tolerance.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

A lead-free alternative to 485 brass, 464 brass offers good weldability, strength, and wear resistance. It’s widely used for marine hardware, pump and propeller shafts, and rivets.

353 brass is more formable than 385 brass while maintaining good machinability. Commonly called engraver’s brass, it’s well suited for fabrication processes such as knurling and threading. Use it to make nuts, gears, drawer pulls, and hinges.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.

Use these metal dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.