Combine these shafts with a machine key (not included) to transmit torque to gears, sprockets, and other power transmission components. All have an ANSI standard keyway (keys not included; see our selection of key stock). Their edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.

Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. 1045 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use.

For technical drawings and 3-D models, click on a part number.

Smooth, hard, and wear resistant, linear motion shafts work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. The smooth surface reduces friction and wear on the bearing—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. All are turned, ground, and polished to tight diameter and straightness tolerances.

Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. 1055 and 1060 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. Shafts with chamfered edges have their edges ground to reduce damage to bearings, housings, and other components during installation.

Case-hardened shafts are hardened only on the surface of the shaft, which increases wear resistance while allowing the center to remain soft for absorbing stresses caused by shifting loads.

For technical drawings and 3-D models, click on a part number.