System of Measurement System of Measurement |
---|
|
Diameter Diameter | Show |
---|
|
Diameter Diameter | Hide |
---|
Thread Size Thread Size |
---|
|
Thread Pitch Thread Pitch |
---|
|
Thread Type Thread Type |
---|
|
Component Component |
---|
![]() | Ball Nut |
Nut Type Nut Type |
---|
![]() | Flange |
Travel Distance per Turn Travel Distance per Turn |
---|
|
Length Length |
---|
|
Thread Direction Thread Direction |
---|
![]() | Right Hand |
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
---|
|
Material Material |
---|
|
Number of Thread Starts Number of Thread Starts |
---|
|
Flange Hardness Flange Hardness |
---|
|
Flange Height Flange Height |
---|
|
Flange Thickness Flange Thickness |
---|
|
Flange Width Flange Width |
---|
|
Hardness Hardness |
---|
|
Maximum Backlash Maximum Backlash |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Mounting Hole Center-to-Center Height Mounting Hole Center-to-Center Height |
---|
|
More
Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts. To ensure compatibility, select components that have the same thread size and pitch. Ball nuts are furnished with a tube to keep ball bearings in place. Do not remove the tube until you are ready to install the nuts onto the screws.
Travel distance per turn, also known as screw lead, is the distance a ball nut moves with one revolution of the ball screw.
For technical drawings and 3-D models, click on a part number.
Flange | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Pitch, mm | Lg., mm | Dia., mm | Wd., mm | Ht., mm | Thick., mm | No. of Thread Starts | Travel Distance per Turn, mm | Hardness | Dynamic Thrust Load Cap., lbs. | Max. Backlash, mm | Temperature Range, °F | Each | |
Alloy Steel | ||||||||||||||
M25 | 5 | 40 | 43 | 67 | 50 | 10 | 1 | 5 | Rockwell C58 | 1,500 | 0.1 | 5° to 175° | 0000000 | 0000000 |