Use these general purpose shafts with bearings, sprockets, and gears to transmit rotary motion.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as gears, axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

This material has tighter tolerances than standard 304 stainless steel.

This material has tighter tolerances than standard 303 stainless steel.

Hardened for improved strength and wear resistance, these rods are precision ground to a strict diameter tolerance. Use them for turning applications in your lathe.

This material is precision ground to offer tighter tolerances than standard 316 stainless steel.

These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits.

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.

These rods and discs are precision ground to offer tighter tolerances than standard 6061 rods and discs.

With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.

Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.

Use these metal dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts.