McMaster-Carr logo
    Filter by
    Hardness Rating
    Tolerance Rating
    Heat Treatment
    Maximum Temperature
    DFARS Specialty Metals
    Industrial Info Compare
    Mechanical Finish
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Appearance
    Melting Point Temperature
    Modulus of Elasticity
    Minimum Temperature
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    100 Products

    High-Strength Grade 5 Titanium Rods and Discs

    Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. It's often used for turbine blades, fasteners, and spacer rings.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Rods
    Image of Product. Front orientation. Titanium. High-Strength Grade 5 Titanium Rods and Discs.
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    1/8"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K51
    00000
    000000
    000000
    000000
    000000
    3/16"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K52
    00000
    00000
    00000
    00000
    00000
    1/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K53
    00000
    00000
    00000
    00000
    000000
    5/16"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K54
    00000
    00000
    00000
    000000
    000000
    3/8"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K55
    00000
    00000
    00000
    000000
    000000
    1/2"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K56
    00000
    00000
    000000
    000000
    000000
    5/8"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K57
    00000
    00000
    000000
    000000
    000000
    3/4"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K58
    00000
    000000
    000000
    000000
    000000
    7/8"-0.002" to 0.002"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K59
    00000
    000000
    000000
    000000
    000000
    1"-0.0025" to 0.0025"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K61
    000000
    000000
    000000
    000000
    000000
    1 1/4"-0.0025" to 0.0025"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K62
    000000
    000000
    000000
    000000
    00000000
    1 1/2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K63
    000000
    000000
    000000
    000000
    00000000
    1 3/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K64
    000000
    000000
    000000
    00000000
    00000000
    2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K65
    000000
    000000
    00000000
    00000000
    00000000
    2 1/4"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K66
    000000
    000000
    00000000
    00000000
    00000000
    2 1/2"-0.003" to 0.003"Ground1/8"/5 ft.120,000Rockwell C30 (Hard)AnnealedASTM B34889055K67
    000000
    000000
    00000000
    00000000
    00000000

    Ultra-Corrosion-Resistant Grade 2 Titanium Rods

    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 2 Titanium Rods.
    Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical-processing equipment, heat exchangers, and marine hardware.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    1/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K28
    00000
    00000
    00000
    00000
    000000
    1/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K11
    0000
    00000
    00000
    00000
    00000
    3/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K12
    0000
    00000
    00000
    00000
    00000
    1/4"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K13
    00000
    00000
    00000
    00000
    00000
    5/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K14
    00000
    00000
    00000
    00000
    000000
    3/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K15
    00000
    00000
    00000
    00000
    000000
    7/16"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K91
    00000
    00000
    00000
    000000
    000000
    1/2"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K16
    00000
    00000
    000000
    000000
    000000
    5/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K17
    00000
    00000
    000000
    000000
    000000
    3/4"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K18
    00000
    000000
    000000
    000000
    000000
    7/8"-0.002" to 0.002"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K19
    00000
    000000
    000000
    000000
    000000
    1"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K21
    000000
    000000
    000000
    000000
    000000
    1 1/4"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K22
    000000
    000000
    000000
    000000
    00000000
    1 1/2"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K23
    000000
    000000
    000000
    000000
    00000000
    1 3/4"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K24
    000000
    000000
    000000
    00000000
    00000000
    2"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K25
    000000
    000000
    00000000
    00000000
    00000000
    2 1/4"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K26
    000000
    000000
    00000000
    00000000
    00000000
    2 1/2"-0.003" to 0.003"1/16"/5 ft.40,000Rockwell B65 (Medium)AnnealedASTM B34889145K27
    000000
    000000
    00000000
    00000000
    00000000

    Dowel Pins

    Precisely align machine parts and prevent movement during assembly. These dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. They can also be used as a pivot, shaft, or hinge to join moving components. Since dowel pins can be hard to remove, they are best suited for permanent fixtures that don't require frequent adjustments or disassembly.
    Lightweight Corrosion-Resistant Titanium
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head.
    Grade 2 Titanium—The best of both worlds, these pins are lightweight like aluminum and as corrosion resistant as 316 stainless steel. Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. This makes them ideal for use in chemical-processing and water-treatment facilities since they stand up to strong acids and other harsh chemicals.
    Lg.
    Dia. Tolerance
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Each
    Grade 2 Titanium
     
    1/8" Diameter
    1/4"0.0001" to 0.0003"Not RatedNot Rated97395A861000000
    5/16"0.0001" to 0.0003"Not RatedNot Rated97395A86200000
    3/8"0.0001" to 0.0003"Not RatedNot Rated97395A86300000
    1/2"0.0001" to 0.0003"Not RatedNot Rated97395A86400000
    5/8"0.0001" to 0.0003"Not RatedNot Rated97395A86500000
    3/4"0.0001" to 0.0003"Not RatedNot Rated97395A86600000
    1"0.0001" to 0.0003"Not RatedNot Rated97395A86700000
     
    3/16" Diameter
    3/8"0.0001" to 0.0003"Not RatedNot Rated97395A86800000
    1/2"0.0001" to 0.0003"Not RatedNot Rated97395A86900000
    5/8"0.0001" to 0.0003"Not RatedNot Rated97395A87100000
    3/4"0.0001" to 0.0003"Not RatedNot Rated97395A87200000
    1"0.0001" to 0.0003"Not RatedNot Rated97395A87300000
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"Not RatedNot Rated97395A87900000
    5/8"0.0001" to 0.0003"Not RatedNot Rated97395A87400000
    3/4"0.0001" to 0.0003"Not RatedNot Rated97395A87500000
    1"0.0001" to 0.0003"Not RatedNot Rated97395A87600000
    1 1/2"0.0001" to 0.0003"Not RatedNot Rated97395A87700000
    2"0.0001" to 0.0003"Not RatedNot Rated97395A87800000
     

    Ultra-Corrosion-Resistant Grade 4 Titanium Rods

    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 4 Titanium Rods.
    These titanium rods are the strongest of the commercially pure titanium alloys, Grades 1 through 4, and resist corrosion better than Grade 5 titanium. However, they’re not as strong as Grade 5, and they won’t bend or form as easily as lower grades. Use them in chemical processing and marine environments. Nearly 99% pure, these rods won’t corrode from chlorides or oxidizing acids, such as hydrochloric and sulfuric acids. They also stand up to alkalis, such as hydroxide and ammonia. With more iron and oxygen than lower grade titanium, these rods are lightweight as well as strong. They also withstand impacts at low temperatures.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs.
    Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    6 ft.
    Long
    1/8"-0.005" to 0.005"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3484242N1
    00000
    000000
    000000
    000000
    000000
    3/16"-0.005" to 0.005"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3484242N2
    00000
    00000
    00000
    00000
    00000
    1/4"-0.005" to 0.005"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3484242N3
    00000
    00000
    00000
    00000
    000000
    3/8"-0.006" to 0.006"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3484242N5
    00000
    00000
    00000
    000000
    000000
    1/2"-0.007" to 0.007"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3484242N7
    00000
    00000
    000000
    000000
    000000
    3/4"-0.008" to 0.008"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3484242N9
    00000
    000000
    000000
    000000
    000000
    1"-0.009" to 0.009"1/8"/5 ft.70,000Rockwell B100 (Hard)AnnealedASTM B3484242N12
    000000
    000000
    000000
    000000
    000000

    Easy-Weld Grade 9 Titanium

    Image of Product. Front orientation. Titanium. Easy-Weld Grade 9 Titanium.
    Grade 9 titanium has less aluminum and vanadium than Grade 5, so it's easier to weld but not as strong.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Wall
    Thk.
    OD
    OD
    Tolerance
    ID
    ID Tolerance
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Temper
    Rating
    Fabrication
    Specs. Met
    1 ft.
    Long
    3 ft.
    Long
    5 ft.
    Long
    0.016"1/4"0" to 0.004"0.218"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T11
    000000
    0000000
    0000000
    0.019"3/8"0" to 0.004"0.337"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T15
    00000
    000000
    000000
    0.02"1/4"0" to 0.004"0.21"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T13
    00000
    000000
    000000
    0.026"1/2"0" to 0.004"0.448"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T19
    00000
    000000
    000000
    0.028"3/8"0" to 0.004"0.319"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T17
    00000
    000000
    000000
    0.032"5/8"0" to 0.004"0.561"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T21
    00000
    000000
    000000
    0.039"3/4"0" to 0.004"0.672"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T23
    000000
    000000
    000000
    0.051"1"0" to 0.004"0.898"-0.003" to 0.003"0.025"/1 ft.105,000 Not RatedNot RatedStress RelievedSAE AMS49458806T25
    000000
    000000
    000000

    Fatigue-Resistant Grade 23 Titanium Rods

    Image of Product. Front orientation. Titanium. Fatigue-Resistant Grade 23 Titanium Rods.
    Purer than Grade 5 titanium, these long-lasting rods resist fracturing from use even when cracked. They’re also easier to form into shapes than Grade 5 titanium and lighter in weight than steel. Thanks to their aluminum and vanadium content, these rods are stronger than pure titanium, though they’re not as strong as Grade 5. They won’t rust, even in marine or saltwater environments. All meet ASTM F136 and ISO standards for biomedical use. They also meet ASTM B348 standards for titanium alloys. Grade 23 titanium is also known as 6-4 ELI and Ti-6Al-4V ELI titanium.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Dia.
    Dia. Tolerance
    Mechanical
    Finish
    Straightness
    Tolerance
    Yield Strength,
    psi
    Hardness
    Heat
    Treatment
    Specs. Met
    1/2 ft.
    Long
    1 ft.
    Long
    2 ft.
    Long
    3 ft.
    Long
    1/8"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N11
    0000000
    0000000
    0000000
    0000000
    3/16"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N12
    000000
    000000
    000000
    000000
    1/4"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N13
    000000
    000000
    000000
    000000
    5/16"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N14
    000000
    000000
    000000
    000000
    7/16"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N16
    000000
    000000
    000000
    000000
    1/2"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N17
    000000
    000000
    000000
    000000
    5/8"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N18
    000000
    000000
    000000
    000000
    3/4"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N19
    000000
    000000
    000000
    000000
    1"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N22
    000000
    000000
    000000
    000000
    1 1/4"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N23
    000000
    000000
    000000
    000000
    1 1/2"-0.003" to 0.003"GroundNot Rated120,000Rockwell C34 (Hard)AnnealedASTM B348, ASTM F136, ISO 5832-35061N24
    000000
    000000
    000000
    000000

    Ultra-Corrosion-Resistant Grade 2 Titanium Wire

    Image of Product. Front orientation. Titanium. Ultra-Corrosion-Resistant Grade 2 Titanium Wire.
    Bend this wire and it will stay in place. Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical-processing equipment, heat exchangers, and marine hardware.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    1/8 lb. Coil
    1/4 lb. Coil
    Dia.
    Dia. Tolerance
    Max. Temp.,
    ° F
    Heat
    Treatment
    Tensile Strength,
    psi
    Specs.
    Met
    Lg.,
    ft.
    Each
    Lg.,
    ft.
    Each
    Matte
    0.025"-0.003" to 0.003"500Annealed50,000ASTM B86313090455K31000000026090455K490000000
    0.031"-0.003" to 0.003"500Annealed50,000ASTM B8638490455K320000016590455K51000000
    0.046"-0.003" to 0.003"500Annealed50,000ASTM B8633890455K33000007690455K52000000
    0.051"-0.003" to 0.003"500Annealed50,000ASTM B8633190455K34000006290455K53000000
    0.08"-0.003" to 0.003"500Annealed50,000ASTM B8631290455K36000002590455K55000000
    0.125"-0.003" to 0.003"500Annealed50,000ASTM B863690455K37000001290455K56000000
     

    Threaded Rods

    Anchor, connect, or hang components in a wide variety of applications, from mounting I-beams to suspending light fixtures.
    Titanium
    Image of Product. Front orientation. Threaded Rods. Threaded Rods.
    Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium—The best of both worlds, these rods are lightweight like aluminum and more corrosion resistant than 316 stainless steel. Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9.
    Lg.,
    ft.
    Tensile Strength,
    psi
    Hardness
    Specs.
    Met
    Each
    Ultra-Corrosion-Resistant Lightweight Grade 2 Titanium
     
    8-32
    150,000Rockwell B80ASTM B34896095A145000000
    350,000Rockwell B80ASTM B34896095A120000000
     
    10-24
    150,000Rockwell B80ASTM B34896095A15000000
    350,000Rockwell B80ASTM B34896095A125000000
     
    1/4"-20
    150,000Rockwell B80ASTM B34896095A15500000
    350,000Rockwell B80ASTM B34896095A130000000
     
    5/16"-18
    150,000Rockwell B80ASTM B34896095A16000000
    350,000Rockwell B80ASTM B34896095A135000000
     
    3/8"-16
    150,000Rockwell B80ASTM B34896095A16500000
    350,000Rockwell B80ASTM B34896095A140000000
     
    back to top