Filter by
System of Measurement
Thread Size
Component
Thread Direction
Threading
Head Width
Hardness
Fastener Strength Grade/Class
Number of Thread Starts
Export Control Classification Number (ECCN)
Tensile Strength
Speed Ratio
DFARS Specialty Metals
Travel Distance per Turn
Fastener Head Type
Precision Acme Lead Screws and Nuts
 |
Pair with a motor in automated motion and positioning applications. A tight thread fit allows these lead screws and nuts to make accurate, repeatable starts and stops. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. To ensure compatibility, please select components that have the same thread direction, thread size, and number of thread starts.
Lead Screws—Right-Hand Thread
 |  |
Right-Hand Threads |
1018 Low-Carbon Steel—Carbon steel lead screws and flanges have good machinability.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
Thread Size | Lg., ft. | Thread Type | Speed Ratio | No. of Thread Starts | Travel Distance per Turn | Accuracy for Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1018 Low-Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | 3 | Acme | 1:1 | 1 | 0.167" | ±0.009"/1 ft. | Acme Class 2C | Not Rated | Not Rated | 99030A966 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | 6 | Acme | 1:1 | 1 | 0.167" | ±0.009"/1 ft. | Acme Class 2C | Not Rated | Not Rated | 99030A967 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Round Nuts—Right-Hand Thread
 |
Iron—Iron nuts have good machinability and high strength.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
Thread Size | Lg. | Dia. | Thread Type | Speed Ratio | No. of Thread Starts | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Dynamic Thrust Load Cap. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Iron | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | 2" | 2.985" | Acme | 1:1 | 1 | 0.167" | Acme Class 2C | Not Rated | Not Rated | Not Rated | 95365A631 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Externally Threaded Nuts—Right-Hand Thread
 |
Combine externally threaded nuts with a flange to create a custom flange nut.
673 Bronze—932 bearing bronze and 673 bronze nuts are wear resistant. They have good machinability and fair corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
External Thread | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Lg. | Dia. | Thread Type | Speed Ratio | No. of Thread Starts | Travel Distance per Turn | Size | Lg. | Thread Fit | Hardness | Tensile Strength | Dynamic Thrust Load Cap. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
673 Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | 1 1/2" | 1.5" | Acme | 1:1 | 1 | 0.167" | 1 3/8"-16 | 1/2" | Acme Class 2C | Not Rated | Not Rated | Not Rated | 95072A883 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flanges
 |  |
Flange Thread Size | Flange Dia. | Flange Thk. | Bolt Circle Dia. | Flange Hardness | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Black-Oxide 1117 Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1 3/8"-16 | 2 49/64" | 33/64" | 2 17/64" | Brinell 135 | 1329K104 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Acme Lead Screws and Nuts
 |
Found in hand-powered clamps, vises, grates, doors, and work tables, lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects. To ensure compatibility, please select components that have the same thread direction, thread size, and number of thread starts.
Lead Screws—Right-Hand Thread
|
Carbon Steel—Carbon steel components are easier to machine than alloy steel components.
Alloy Steel—Alloy steel components are harder and stronger than carbon steel components.
18-8 Stainless Steel—18-8 stainless steel components have good corrosion resistance.
316 Stainless Steel—316 stainless steel components have excellent corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Lg. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Fastener Strength Grade/Class | Hardness | Tensile Strength, psi | Specs. Met | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 12" | 1 | 1:1 | 0.167" | Acme Class 2G | SAE Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A739 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 3 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | SAE Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A846 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 6 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | SAE Grade 2 | Rockwell B61 | 53,000 | ASTM A108 | 98935A037 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 12 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | SAE Grade 2 | Rockwell B61 | 64,000 | ASTM A108 | 98935A662 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Alloy Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 12" | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B7 | Rockwell C35 | 125,000 | ASTM A193 | 93410A948 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 3 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B7 | Rockwell C35 | 125,000 | ASTM A193 | 93410A630 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 6 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B7 | Rockwell C35 | 125,000 | ASTM A193 | 93410A160 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18-8 Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 12" | 1 | 1:1 | 0.167" | Acme Class 2G | — | Rockwell B96 | Not Rated | — | 95061A633 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 3 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | — | Rockwell B96 | Not Rated | — | 95061A837 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 6 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | — | Rockwell B96 | Not Rated | — | 95061A193 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 12 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | — | Rockwell B96 | Not Rated | — | 95061A947 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
316 Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 12" | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B8M | Rockwell B97 | 75,000 | ASTM A193 | 97014A637 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 3 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B8M | Rockwell B97 | 75,000 | ASTM A193 | 97014A638 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 6 ft. | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B8M | Rockwell B97 | 75,000 | ASTM A193 | 97014A639 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lead Screws—Left-Hand Thread
|
Carbon Steel—Carbon steel components are easier to machine than alloy steel components.
Alloy Steel—Alloy steel components are harder and stronger than carbon steel components.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Lg., ft. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Fastener Strength Grade/Class | Hardness | Tensile Strength, psi | Specs. Met | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 3 | 1 | 1:1 | 0.167" | Acme Class 2G | SAE Grade 2 | Rockwell B61 | 53,000 | ASTM A108 | 98935A459 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 6 | 1 | 1:1 | 0.167" | Acme Class 2G | SAE Grade 2 | Rockwell B61 | 53,000 | ASTM A108 | 98935A460 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Alloy Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 3 | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B7 | Rockwell C35 | 125,000 | ASTM A193 | 93410A464 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 6 | 1 | 1:1 | 0.167" | Acme Class 2G | ASTM Grade B7 | Rockwell C35 | 125,000 | ASTM A193 | 93410A465 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hex-Head Screws—Right-Hand Thread
 |
Hex head screws fasten heavy loads. They’re generally shorter than lead screws and can be tightened with a wrench. Length is measured from under the head.
Carbon Steel—Carbon steel components are easier to machine than alloy steel components.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Head | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Type | Lg. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Lg. | Wd. | Ht. | Thread Fit | Fastener Strength Grade/Class | Hardness | Tensile Strength, psi | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 3" | 1 | 1:1 | 0.167" | 2 1/2" to 3" | 1 5/16" | 35/64" | Acme Class 2G | SAE Grade 5 | Rockwell C19 | 105,000 | 93097A270 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 4" | 1 | 1:1 | 0.167" | 3 1/2" to 4" | 1 5/16" | 35/64" | Acme Class 2G | SAE Grade 5 | Rockwell C19 | 105,000 | 93097A280 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 6" | 1 | 1:1 | 0.167" | 5 1/2" to 6" | 1 5/16" | 35/64" | Acme Class 2G | SAE Grade 5 | Rockwell C19 | 105,000 | 93097A290 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Coupling Nuts—Right-Hand Thread
 |
Coupling nuts connect two lead screws.
Carbon Steel—Carbon steel components are easier to machine than alloy steel components.
18-8 Stainless Steel—18-8 stainless steel components have good corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Wd. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 2 1/2" | 1 1/4" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B75 | Not Rated | 93023A665 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18-8 Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 2 1/2" | 1 1/4" | 1 | 1:1 | 0.167" | Acme Class 2G | Not Rated | Not Rated | 93030A115 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Coupling Nuts—Left-Hand Thread
|
Coupling nuts connect two lead screws.
Carbon Steel—Carbon steel components are easier to machine than alloy steel components.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Wd. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 2 1/2" | 1 1/4" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B75 | Not Rated | 93026A304 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flange Nuts—Right-Hand Thread
 |
Flange nuts move objects along the length of a lead screw. Flange nuts have a wide machinable flange for custom mounting.
932 Bearing Bronze—932 bearing bronze components are more wear resistant than brass components. They have good machinability and fair corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Flange | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Type | Ht. | Dia. | Dia. | Thk. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
932 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 1 3/4" | 1 1/4" | 2 1/4" | 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Not Rated | Not Rated | 95120A143 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flange Nuts—Left-Hand Thread
|
Flange nuts move objects along the length of a lead screw. Flange nuts have a wide machinable flange for custom mounting.
932 Bearing Bronze—932 bearing bronze components are more wear resistant than brass components. They have good machinability and fair corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Flange | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Type | Ht. | Dia. | Dia. | Thk. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
932 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 1 3/4" | 1 1/4" | 2 1/4" | 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Not Rated | Not Rated | 95120A543 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Round Nuts—Right-Hand Thread
 |
Round nuts move objects along the length of a lead screw.
360 Brass—360 brass components have excellent machinability and good corrosion resistance.
932 Bearing Bronze—932 bearing bronze components are more wear resistant than brass components. They have good machinability and fair corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Dia. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Specs. Met | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
360 Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 7/8" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B55 | Not Rated | ASTM B16 | 95100A117 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
932 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 1 17/32" | 1 21/32" | 1 | 1:1 | 0.167" | Acme Class 2G | Not Rated | Not Rated | ASTM B505 | 95090A503 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Round Nuts—Left-Hand Thread
|
Round nuts move objects along the length of a lead screw.
360 Brass—360 brass components have excellent machinability and good corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Dia. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Specs. Met | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
360 Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 7/8" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B55 | Not Rated | ASTM B16 | 95100A417 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hex Nuts—Right-Hand Thread
 |
Hex nuts fasten and position lead screw components.
Carbon Steel—Carbon steel components are easier to machine than alloy steel components.
Zinc-Plated Carbon Steel—Zinc-plated carbon steel components have mild corrosion resistance and are easier to machine than alloy steel components.
360 Brass—360 brass components have excellent machinability and good corrosion resistance.
18-8 Stainless Steel—18-8 stainless steel components have good corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Wd. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Specs. Met | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 55/64" | 1 7/16" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B75 | Not Rated | — | 94815A123 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Zinc-Plated Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 55/64" | 1 7/16" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B75 | Not Rated | — | 98948A119 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
360 Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 7/8" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B75 | Not Rated | ASTM B16 | 95155A143 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18-8 Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 55/64" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Not Rated | Not Rated | — | 95066A226 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hex Nuts—Left-Hand Thread
|
Hex nuts fasten and position lead screw components.
Carbon Steel—Carbon steel components are easier to machine than alloy steel components.
360 Brass—360 brass components have excellent machinability and good corrosion resistance.
18-8 Stainless Steel—18-8 stainless steel components have good corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Wd. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Fastener Strength Grade/Class | Hardness | Tensile Strength, psi | Specs. Met | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Carbon Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 55/64" | 1 7/16" | 1 | 1:1 | 0.167" | Acme Class 2G | SAE Grade 2 | Rockwell B85 | 64,000 | — | 91808A120 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
360 Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 7/8" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | — | Rockwell B75 | Not Rated | ASTM B16 | 95155A343 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
18-8 Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 55/64" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | — | Not Rated | Not Rated | — | 95066A426 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Square Nuts—Right-Hand Thread
 |
Square nuts fasten and position lead screw components. Square nuts have large sides, which make them easier to grip with a wrench than hex nuts and keep them from rotating in channels and square holes.
360 Brass—360 brass components have excellent machinability and good corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Wd. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Specs. Met | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
360 Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 7/8" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B55 | Not Rated | ASTM B16 | 95270A143 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Square Nuts—Left-Hand Thread
|
Square nuts fasten and position lead screw components. Square nuts have large sides, which make them easier to grip with a wrench than hex nuts and keep them from rotating in channels and square holes.
360 Brass—360 brass components have excellent machinability and good corrosion resistance.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Wd. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Specs. Met | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
360 Brass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 7/8" | 1 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B55 | Not Rated | ASTM B16 | 95270A543 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flat Handles—Right-Hand Thread
 |
Handles fasten and position lead screw components. Handles are easy to grip and tighten by hand for quick assembly and disassembly.
Cast Iron—Cast iron components have good machinability and high strength.
Travel Distance per Turn—Travel distance per turn, also known as screw lead, is the distance a nut or handle moves with one revolution of the lead screw.
Thread Size | Thread Type | Ht. | Wd. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Tensile Strength | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cast Iron | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7/8"-6 | Acme | 1 1/8" | 9 1/2" | 1 | 1:1 | 0.167" | Acme Class 2G | Rockwell B72 | Not Rated | 92428A744 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
