Length Length |
|---|
Finish Finish |
|---|
|
Minimum Hardness Minimum Hardness |
|---|
|
Breaking Strength Breaking Strength |
|---|
|
|
Grip Length Grip Length |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Shoulder Length Shoulder Length |
|---|
|
|
|
Threading Threading |
|---|
 | Partially Threaded |
 | Fully Threaded |
Breaking Torque Breaking Torque |
|---|
|
For Minimum Shaft Diameter For Minimum Shaft Diameter |
|---|
About Thumb Screw and Binding Post Materials
More
About Shoulder Screws
More
About Hex Head Screws and Bolts
More
Dowel Pins
Use dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. For a tight fit, your hole should be equal to or slightly smaller than the diameter shown. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
Steel pins are the strongest dowel pins. Steel pins are precision ground except for 1/32" diameter pins. Pins with a black-oxide finish have some corrosion resistance. 1215 carbon steel pins are easier to machine than other steel pins.
400 nickel pins and grade 2 titanium pins resist salt water and caustic chemicals. 400 nickel, also known as Monel, may be mildly magnetic. Titanium pins are about as strong as steel pins, but 40% lighter. They are not magnetic.
Brass pins are softer than other materials, so they’re often used as shear pins. They resist corrosion and are nonmagnetic.
Aluminum pins are one-third the weight of steel pins, but not as strong. They resist corrosion and are nonmagnetic.
Some pins meet material and dimensional standards set by ASME, Mil. Spec., DIN, or ISO.
For technical drawings and 3-D models, click on a part number.
4037 Alloy Steel, 4140 Alloy Steel
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/2" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 7/8" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
5/8" Dia. | |||||||
| 2 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 6" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
7/8" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | Rockwell C47 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | Rockwell C47 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 3 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | Rockwell C47 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
4140 Alloy Steel
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/2" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 0.0001" to 0.0003" | Rockwell C50 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 000000 |
| 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 1/8" | 0.0001" to 0.0003" | Rockwell C50 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 1 3/8" | 0.0001" to 0.0003" | Rockwell C50 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 5/8" | 0.0001" to 0.0003" | Rockwell C50 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 4 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 5" | 0.0001" to 0.0003" | Rockwell C47 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 6" | 0.0001" to 0.0003" | Rockwell C50 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 8" | 0.0001" to 0.0003" | Rockwell C50 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 10" | 0.0001" to 0.0003" | Rockwell C50 | 42,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
9/16" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | __ | 1 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | __ | 1 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | __ | 1 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | __ | 1 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | __ | 1 | 000000000 | 00000 |
5/8" Dia. | |||||||
| 5/8" | 0.0001" to 0.0003" | Rockwell C50 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 7/8" | 0.0001" to 0.0003" | Rockwell C50 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 1/8" | 0.0001" to 0.0003" | Rockwell C50 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 3/8" | 0.0001" to 0.0003" | Rockwell C50 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3 1/4" | 0.0001" to 0.0003" | Rockwell C50 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3 3/4" | 0.0001" to 0.0003" | Rockwell C50 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 5" | 0.0001" to 0.0003" | Rockwell C47 | 65,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
3/4" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | Rockwell C50 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 1 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 2 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 4 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 5" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 6" | 0.0001" to 0.0003" | Rockwell C47 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 8" | 0.0001" to 0.0003" | Rockwell C50 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 10" | 0.0001" to 0.0003" | Rockwell C50 | 94,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
7/8" Dia. | |||||||
| 7/8" | 0.0001" to 0.0003" | Rockwell C50 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | Rockwell C50 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C50 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 5" | 0.0001" to 0.0003" | Rockwell C50 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 6" | 0.0001" to 0.0003" | Rockwell C50 | 120,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
1" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | Rockwell C50 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C50 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 1 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/4" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 2 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 2 3/4" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 0000 |
| 3" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 3 1/4" | 0.0001" to 0.0003" | Rockwell C50 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 3 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 4 1/2" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 5" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 6" | 0.0001" to 0.0003" | Rockwell C47 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 8" | 0.0001" to 0.0003" | Rockwell C50 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 10" | 0.0001" to 0.0003" | Rockwell C50 | 160,000 | ASME B18.8.2 | 1 | 000000000 | 00000 |
1 1/4" Dia. | |||||||
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 4" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | ASME B18.8.2 | 1 | 000000000 | 00000 |
| 6" | 0.0001" to 0.0003" | Rockwell C50 | Not Rated | ASME B18.8.2 | 1 | 000000000 | 00000 |
Black-Oxide Alloy Steel
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 3/8" | 0.0001" to 0.0003" | Rockwell C60 | 2,600 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 2,600 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 5/8" | 0.0001" to 0.0003" | Rockwell C60 | 2,600 | ASME B18.8.2 | 25 | 000000000 | 0000 |
| 3/4" | 0.0001" to 0.0003" | Rockwell C60 | 2,600 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Rockwell C60 | 2,600 | ASME B18.8.2 | 25 | 000000000 | 00000 |
3/16" Dia. | |||||||
| 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 5,900 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Rockwell C60 | 5,900 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Rockwell C60 | 5,900 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C60 | 5,900 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 5,900 | ASME B18.8.2 | 25 | 000000000 | 00000 |
1/4" Dia. | |||||||
| 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 10,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Rockwell C60 | 10,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Rockwell C60 | 10,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C60 | 10,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 10,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Rockwell C60 | 10,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
5/16" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | Rockwell C60 | 16,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Rockwell C60 | 16,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C60 | 16,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 16,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Rockwell C60 | 16,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
3/8" Dia. | |||||||
| 3/4" | 0.0001" to 0.0003" | Rockwell C60 | 23,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Rockwell C60 | 23,000 | ASME B18.8.2 | 25 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Rockwell C60 | 23,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 23,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Rockwell C60 | 23,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
1/2" Dia. | |||||||
| 1" | 0.0001" to 0.0003" | Rockwell C60 | 42,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 42,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Rockwell C60 | 42,000 | ASME B18.8.2 | 10 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | Rockwell C60 | 42,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
5/8" Dia. | |||||||
| 2" | 0.0001" to 0.0003" | Rockwell C60 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
| 3" | 0.0001" to 0.0003" | Rockwell C60 | 65,000 | ASME B18.8.2 | 5 | 000000000 | 00000 |
1215 Carbon Steel
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength | Pkg. Qty. | Pkg. | |
1/8" Dia. | ||||||
|---|---|---|---|---|---|---|
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 000000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
3/16" Dia. | ||||||
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
1/4" Dia. | ||||||
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 50 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
5/16" Dia. | ||||||
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
3/8" Dia. | ||||||
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
1/2" Dia. | ||||||
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 2 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
400 Nickel
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength | Each | |
1/8" Dia. | |||||
|---|---|---|---|---|---|
| 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/16" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 0000 |
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 0000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/16" Dia. | |||||
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1/4" Dia. | |||||
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
Grade 2 Titanium
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength | Each | |
1/8" Dia. | |||||
|---|---|---|---|---|---|
| 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 000000 |
| 5/16" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/16" Dia. | |||||
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1/4" Dia. | |||||
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
360 Brass
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength | Pkg. Qty. | Pkg. | |
1/16" Dia. | ||||||
|---|---|---|---|---|---|---|
| 1/4" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
3/32" Dia. | ||||||
| 1/4" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
1/8" Dia. | ||||||
| 3/8" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | 0" to 0.0002" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 5/8" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 3/4" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
3/16" Dia. | ||||||
| 1/2" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 0000 |
| 5/8" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
1/4" Dia. | ||||||
| 1/2" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1" | 0" to 0.0002" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
5/16" Dia. | ||||||
| 3/4" | 0" to 0.0002" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
| 1" | 0" to 0.0002" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
| 1 1/4" | 0" to 0.0002" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1 1/2" | 0" to 0.0002" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
3/8" Dia. | ||||||
| 3/4" | 0" to 0.0002" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1" | 0" to 0.0002" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1 1/4" | 0" to 0.0002" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1 1/2" | 0" to 0.0002" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
6061 Aluminum
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength | Pkg. Qty. | Pkg. | |
1/16" Dia. | ||||||
|---|---|---|---|---|---|---|
| 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 000000 |
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
3/32" Dia. | ||||||
| 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
1/8" Dia. | ||||||
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 25 | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
3/16" Dia. | ||||||
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 10 | 000000000 | 00000 |
1/4" Dia. | ||||||
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
5/16" Dia. | ||||||
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 5 | 000000000 | 00000 |
| 1 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
3/8" Dia. | ||||||
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 1 | 000000000 | 0000 |
Pins for Shear Hubs
For use with Browning shear hubs, these pins are designed to fail at specific loads to protect heavy duty machinery from torque overload. Pins will be either 12L14 or 1215 carbon steel.
For technical drawings and 3-D models, click on a part number.
| Groove Dia. | For Min. Shaft Dia. | Browning Shear Pin Number | Breaking Torque, in.-lbs. | Each | |
1/4" Dia. | |||||
|---|---|---|---|---|---|
1 1/8" Lg. | |||||
| 3/32" | 3/4" | 1H | 930 | 000000000 | 00000 |
| 1/8" | 7/8" | 2H | 1,600 | 000000000 | 0000 |
| 5/32" | 1" | 3H | 2,590 | 000000000 | 0000 |
| 3/16" | 1 1/8" | 4H | 3,730 | 000000000 | 0000 |
3/8" Dia. | |||||
1 1/8" Lg. | |||||
| 3/32" | 7/8" | 1P | 1,340 | 000000000 | 0000 |
| 1/8" | 1" | 2P | 2,390 | 000000000 | 0000 |
| 5/32" | 1 1/8" | 3P | 3,740 | 000000000 | 0000 |
| 3/16" | 1 3/8" | 4P | 5,380 | 000000000 | 0000 |
| 7/32" | 1 1/2" | 5P | 7,330 | 000000000 | 0000 |
| 1/4" | 1 5/8" | 6P | 9,570 | 000000000 | 0000 |
| 9/32" | 1 3/4" | 7P | 12,100 | 000000000 | 0000 |
| 5/16" | 1 3/4" | 8P | 14,950 | 000000000 | 0000 |
1/2" Dia. | |||||
1 5/8" Lg. | |||||
| 3/16" | 1 1/2" | 1Q | 7,140 | 000000000 | 00000 |
| 7/32" | 1 5/8" | 2Q | 9,720 | 000000000 | 00000 |
| 1/4" | 1 3/4" | 3Q | 12,700 | 000000000 | 00000 |
| 9/32" | 1 7/8" | 4Q | 16,060 | 000000000 | 00000 |
| 5/16" | 2" | 5Q | 19,840 | 000000000 | 0000 |
| 11/32" | 2 1/8" | 6Q | 24,010 | 000000000 | 00000 |
| 3/8" | 2 1/4" | 7Q | 28,590 | 000000000 | 00000 |
| 13/32" | 2 1/2" | 8Q | 33,530 | 000000000 | 00000 |
| 7/16" | 2 1/2" | 9Q | 38,890 | 000000000 | 0000 |
3/4" Dia. | |||||
1 7/8" Lg. | |||||
| 9/32" | 2 1/4" | 1R | 26,080 | 000000000 | 00000 |
| 5/16" | 2 3/8" | 2R | 32,210 | 000000000 | 00000 |
| 11/32" | 2 1/2" | 3R | 38,970 | 000000000 | 00000 |
| 3/8" | 2 3/4" | 4R | 46,410 | 000000000 | 00000 |
| 13/32" | 2 7/8" | 5R | 54,430 | 000000000 | 00000 |
| 7/16" | 3" | 6R | 63,120 | 000000000 | 00000 |
| 15/32" | 3 1/8" | 7R | 72,490 | 000000000 | 00000 |
| 1/2" | 3 1/4" | 8R | 82,480 | 000000000 | 00000 |
| 17/32" | 3 1/2" | 9R | 93,110 | 000000000 | 00000 |
| 9/16" | 3 1/2" | 10R | 104,370 | 000000000 | 00000 |
| 19/32" | 3 5/8" | 11R | 116,290 | 000000000 | 00000 |
| 5/8" | 3 5/8" | 12R | 128,850 | 000000000 | 00000 |
| 21/32" | 3 5/8" | 13R | 142,040 | 000000000 | 00000 |
| 11/16" | 3 5/8" | 14R | 155,900 | 000000000 | 00000 |
2 1/8" Lg. | |||||
| 11/32" | 2 5/8" | 1S | 44,540 | 000000000 | 00000 |
| 3/8" | 2 7/8" | 2S | 53,040 | 000000000 | 00000 |
| 13/32" | 3" | 3S | 62,200 | 000000000 | 00000 |
| 7/16" | 3 1/8" | 4S | 72,140 | 000000000 | 00000 |
| 15/32" | 3 1/4" | 5S | 82,840 | 000000000 | 00000 |
| 1/2" | 3 1/2" | 6S | 94,270 | 000000000 | 00000 |
| 17/32" | 3 5/8" | 7S | 106,410 | 000000000 | 00000 |
| 9/16" | 3 3/4" | 8S | 119,280 | 000000000 | 00000 |
| 19/32" | 3 7/8" | 9S | 132,910 | 000000000 | 00000 |
| 5/8" | 4" | 10S | 147,250 | 000000000 | 00000 |
| 21/32" | 4 1/8" | 11S | 162,330 | 000000000 | 00000 |
| 11/16" | 4 1/4" | 12S | 178,170 | 000000000 | 00000 |
1" Dia. | |||||
2 5/8" Lg. | |||||
| 3/8" | 3" | 1U | 59,670 | 000000000 | 00000 |
| 13/32" | 3 1/8" | 2U | 69,980 | 000000000 | 00000 |
| 7/16" | 3 1/4" | 3U | 81,160 | 000000000 | 00000 |
| 15/32" | 3 1/2" | 4U | 93,200 | 000000000 | 00000 |
| 1/2" | 3 5/8" | 5U | 106,050 | 000000000 | 00000 |
| 17/32" | 3 3/4" | 6U | 119,710 | 000000000 | 00000 |
| 9/16" | 3 7/8" | 7U | 134,190 | 000000000 | 00000 |
| 19/32" | 4" | 8U | 149,520 | 000000000 | 00000 |
| 5/8" | 4 1/8" | 9U | 165,670 | 000000000 | 00000 |
| 21/32" | 4 1/4" | 10U | 182,620 | 000000000 | 00000 |
| 11/16" | 4 1/2" | 11U | 200,440 | 000000000 | 00000 |
| 23/32" | 4 5/8" | 12U | 219,070 | 000000000 | 00000 |
| 3/4" | 4 3/4" | 13U | 238,570 | 000000000 | 00000 |
| 25/32" | 4 7/8" | 14U | 258,870 | 000000000 | 00000 |
Cotter Pin-Lockable Hex Head Screws
Place a cotter pin through the hole in the shank to keep a nut from loosening (pins and nuts sold separately). These screws have a stronger hold than screws with thread lockers or lock washers. Screws are made to stringent Army-Navy specifications that ensure performance and reliability. They have a precisely measured unthreaded portion (grip). For added strength, place this portion in joints subjected to sideways forces. The cadmium plating provides good corrosion resistance to salt water. Screws have fine threads, which are closely spaced to prevent loosening from vibration; they are not compatible with coarse or extra-fine threads. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Threading | Thread Spacing | Thread Lg. | Grip Lg. | Wd. | Ht. | Hole Dia. | For Cotter Pin Dia. | Tensile Strength, psi | Specifications Met | Pkg. Qty. | Pkg. | |
Cadmium-Plated Steel | |||||||||||||
1/4"-28 | |||||||||||||
| 17/32" | Partially Threaded | Fine | 15/32" | 1/16" | 7/16" | 11/64" | 0.076" | 1/16" | 120,000 | AN4-4 | 10 | 000000000 | 00000 |
| 21/32" | Partially Threaded | Fine | 15/32" | 3/16" | 7/16" | 11/64" | 0.076" | 1/16" | 120,000 | AN4-5 | 10 | 000000000 | 00000 |
| 25/32" | Partially Threaded | Fine | 15/32" | 5/16" | 7/16" | 11/64" | 0.076" | 1/16" | 120,000 | AN4-6 | 10 | 000000000 | 00000 |
| 1 1/32" | Partially Threaded | Fine | 15/32" | 9/16" | 7/16" | 11/64" | 0.076" | 1/16" | 120,000 | AN4-10 | 10 | 000000000 | 00000 |
| 1 9/32" | Partially Threaded | Fine | 15/32" | 13/16" | 7/16" | 11/64" | 0.076" | 1/16" | 120,000 | AN4-12 | 10 | 000000000 | 00000 |
| 1 17/32" | Partially Threaded | Fine | 15/32" | 1 1/16" | 7/16" | 11/64" | 0.076" | 1/16" | 120,000 | AN4-14 | 10 | 000000000 | 00000 |
| 2 1/32" | Partially Threaded | Fine | 15/32" | 1 9/16" | 7/16" | 11/64" | 0.076" | 1/16" | 120,000 | AN4-20 | 10 | 000000000 | 00000 |
5/16"-24 | |||||||||||||
| 27/32" | Partially Threaded | Fine | 17/32" | 5/16" | 1/2" | 13/64" | 0.076" | 1/16" | 120,000 | AN5-6 | 5 | 000000000 | 0000 |
| 1 3/32" | Partially Threaded | Fine | 17/32" | 9/16" | 1/2" | 13/64" | 0.076" | 1/16" | 120,000 | AN5-10 | 5 | 000000000 | 00000 |
| 1 11/32" | Partially Threaded | Fine | 17/32" | 13/16" | 1/2" | 13/64" | 0.076" | 1/16" | 120,000 | AN5-12 | 5 | 000000000 | 0000 |
| 1 19/32" | Partially Threaded | Fine | 17/32" | 1 1/16" | 1/2" | 13/64" | 0.076" | 1/16" | 120,000 | AN5-14 | 5 | 000000000 | 00000 |
| 2 3/32" | Partially Threaded | Fine | 17/32" | 1 9/16" | 1/2" | 13/64" | 0.076" | 1/16" | 120,000 | AN5-20 | 5 | 000000000 | 00000 |
3/8"-24 | |||||||||||||
| 53/64" | Partially Threaded | Fine | 41/64" | 3/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-6 | 5 | 000000000 | 00000 |
| 1 5/64" | Partially Threaded | Fine | 41/64" | 7/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-10 | 5 | 000000000 | 00000 |
| 1 21/64" | Partially Threaded | Fine | 41/64" | 11/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-12 | 5 | 000000000 | 00000 |
| 1 37/64" | Partially Threaded | Fine | 41/64" | 15/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-14 | 5 | 000000000 | 00000 |
| 1 53/64" | Partially Threaded | Fine | 41/64" | 1 3/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-16 | 5 | 000000000 | 00000 |
| 2 5/64" | Partially Threaded | Fine | 41/64" | 1 7/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-20 | 5 | 000000000 | 00000 |
| 2 37/64" | Partially Threaded | Fine | 41/64" | 1 15/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-24 | 5 | 000000000 | 00000 |
| 3 5/64" | Partially Threaded | Fine | 41/64" | 2 7/16" | 9/16" | 15/64" | 0.106" | 3/32" | 120,000 | AN6-30 | 5 | 000000000 | 00000 |
1/2"-20 | |||||||||||||
| 1 3/32" | Partially Threaded | Fine | 25/32" | 5/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-10 | 1 | 000000000 | 00000 |
| 1 11/32" | Partially Threaded | Fine | 25/32" | 9/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-12 | 1 | 000000000 | 0000 |
| 1 19/32" | Partially Threaded | Fine | 25/32" | 13/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-14 | 1 | 000000000 | 0000 |
| 1 27/32" | Partially Threaded | Fine | 25/32" | 1 1/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-16 | 1 | 000000000 | 0000 |
| 2 3/32" | Partially Threaded | Fine | 25/32" | 1 5/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-20 | 1 | 000000000 | 0000 |
| 2 19/32" | Partially Threaded | Fine | 25/32" | 1 13/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-24 | 1 | 000000000 | 0000 |
| 3 3/32" | Partially Threaded | Fine | 25/32" | 2 5/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-30 | 1 | 000000000 | 0000 |
| 3 19/32" | Partially Threaded | Fine | 25/32" | 2 13/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-34 | 1 | 000000000 | 00000 |
| 4 3/32" | Partially Threaded | Fine | 25/32" | 3 5/16" | 3/4" | 19/64" | 0.106" | 3/32" | 120,000 | AN8-40 | 1 | 000000000 | 00000 |
Stainless Steel Hex-Head Thumb Screws
Made from 18-8 stainless steel, these thumb screws are chemical resistant and may be mildly magnetic. Tighten them with a wrench for more torque while fastening. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Head | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Tensile Strength, psi | Hardness | Each | |
18-8 Stainless Steel | ||||||
4-40 | ||||||
| 1/2" | 3/8" | 1/4" | 80,000 | Rockwell B83 | 000000000 | 00000 |
6-32 | ||||||
| 1/2" | 5/16" | 1/4" | 80,000 | Rockwell B83 | 000000000 | 0000 |
8-32 | ||||||
| 1/2" | 3/8" | 1/4" | 80,000 | Rockwell B83 | 000000000 | 0000 |
| 3/4" | 3/8" | 1/4" | 80,000 | Rockwell B83 | 000000000 | 0000 |
10-32 | ||||||
| 1/2" | 3/8" | 1/4" | 80,000 | Rockwell B83 | 000000000 | 0000 |
| 5/8" | 3/8" | 1/4" | 80,000 | Rockwell B83 | 000000000 | 0000 |
| 3/4" | 1/2" | 3/8" | 80,000 | Rockwell B83 | 000000000 | 0000 |
1/4"-20 | ||||||
| 5/8" | 1/2" | 3/8" | 80,000 | Rockwell B83 | 000000000 | 0000 |
| 3/4" | 1/2" | 3/8" | 80,000 | Rockwell B83 | 000000000 | 0000 |
| 1" | 5/8" | 7/16" | 80,000 | Rockwell B83 | 000000000 | 0000 |
| 1 1/4" | 5/8" | 7/16" | 80,000 | Rockwell B83 | 000000000 | 0000 |
Steel Hex Head Shoulder Screws
A zinc plating provides mild corrosion resistance. Also known as wheel and axle bolts, these shoulder screws have a hex head that can be gripped with a wrench. A standard shoulder with an undersized tolerance allows them to fit most machinery and equipment.
For technical drawings and 3-D models, click on a part number.
Each | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Shoulder Lg. | Thread Size | Thread Lg. | Head Wd. | Head Ht. | Finish | Tensile Strength, psi | 1-4 | 5-Up | |
3/8" Shoulder Dia.—Standard Fit (-0.004" to 0" Dia. Tolerance) | |||||||||
| 1 5/16" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 00000 | 00000 |
| 1 3/8" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 7/16" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 1/2" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 9/16" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 5/8" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 3/4" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 00000 | 0000 |
| 1 7/8" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 00000 | 0000 |
| 2" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 00000 | 0000 |
| 2 1/8" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 00000 | 00000 |
| 2 1/4" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 00000 | 00000 |
| 2 1/2" | 1/4"-20 | 3/4" | 5/8" | 3/16" | Zinc Plated | 70,000 | 000000000 | 00000 | 00000 |
1/2" Shoulder Dia.—Standard Fit (-0.004" to 0" Dia. Tolerance) | |||||||||
| 1 5/16" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 3/8" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 7/16" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 1/2" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 9/16" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 5/8" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 3/4" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 1 7/8" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 2" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 2 1/8" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 2 1/4" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |
| 2 1/2" | 3/8"-16 | 3/4" | 3/4" | 1/4" | Zinc Plated | 70,000 | 000000000 | 0000 | 0000 |