For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Cutting Pattern Cutting Pattern |
|---|
|
For Cutting For Cutting |
|---|
|
Blade Material Blade Material |
|---|
|
For Maximum Stainless Steel Thickness For Maximum StainlessSteel Thickness |
|---|
|
|
Opening Style Opening Style |
|---|
|
Overall Length Overall Length |
|---|
|
|
|
Grip Material Grip Material |
|---|
|
Specifications Met Specifications Met |
|---|
|
For Maximum Aluminum Thickness For MaximumAluminum Thickness |
|---|
|
|
|
Plug Type Plug Type |
|---|
|
For Texture For Texture |
|---|
|
About Powered Nibblers and Powered Cutters
More
High-Force Sheet Metal Cutters
Straight, Right
Curves, Left Curves
- Straight,
Right Curves
- Straight,
Left Curves
A double hinge provides high cutting force with low gripping pressure. These cutters are also known as aviation snips. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. Blades are serrated to prevent slipping.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 11 1/2" | 3" | 1/32" | 1/64" | Steel | Steel | Blue | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 000000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||||
| 9 1/4" | 7/8" | 1/16" | __ | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
| 9 3/4" | 1 1/2" | 3/64" | __ | Steel | Steel | Yellow | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Cutting Pattern—Straight, Right Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||||
| 9 3/4" | 1 3/8" | 3/64" | __ | Steel | Steel | Green | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Cutting Pattern—Straight, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||||
| 9 3/4" | 1 3/8" | 3/64" | __ | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
High-Force Sheet Metal Cutters with Offset Handles
Straight, Right
Curves, Left Curves
- Straight,
Right Curves
- Straight,
Left Curves
Keep your hands clear of the material being cut with the offset handles on these cutters. Also known as aviation snips, they have a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. Blades are serrated to prevent slipping.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 9 5/8" | 1 1/2" | 3/64" | 1/64" | Steel | Steel | Yellow | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 000000 |
Cutting Pattern—Straight, Right Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 9 3/4" | 1 3/8" | 3/64" | 3/64" | Steel | Steel | Blue | Plastic | Spring Assisted | Serrated × Serrated | Latch | 000000 | 00000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||||
| 9 1/4" | 1 1/4" | 3/64" | __ | Steel | Steel | Green | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Cutting Pattern—Straight, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 9 3/4" | 1 3/8" | 3/64" | 3/64" | Steel | Steel | Blue | Plastic | Spring Assisted | Serrated × Serrated | Latch | 000000 | 00000 |
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||||
| 9 1/4" | 1 1/4" | 3/64" | __ | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
High-Force Sheet Metal Cutters with
Offset Handles for Tight Spaces
- Straight,
Right Curves
- Straight,
Left Curves
The handles are angled 90° from the blade so you can cut material from directly above in tight spaces. Also known as aviation snips, these cutters have a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use. Blades are serrated to prevent slipping.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 8 3/4" | 1 1/4" | 1/64" | 1/64" | Steel | Steel | Green | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 000000 |
Cutting Pattern—Straight, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 8 3/4" | 1 1/4" | 1/64" | 1/64" | Steel | Steel | Red | Plastic | Spring Assisted | Serrated × Serrated | Latch | 0000000 | 00000 |
Smooth-Edge High-Force Sheet Metal Cutters
Straight, Right
Curves, Left Curves
This cutter has two blades that cut a 13/64" wide strip—peel it back for smooth edges with little distortion. Also known as aviation snips, this cutter has a double hinge that provides high cutting force with low gripping pressure. A spring opens the jaws for quick cutting, and a locking latch holds them together when the cutter is not in use.
| Overall Lg. | Cut Lg. | Cut Wd. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Lock Type | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | ||||||||||||
| 9 1/4" | 9/16" | 13/64" | 1/32" | Steel | Steel | Gray | Plastic | Spring Assisted | Straight × Straight | Latch | 0000000 | 000000 |
Sheet Metal Cutters
Straight, Right
Curves, Left Curves
Also known as tinners' snips, these cutters make straight cuts and curves.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 8" | 1 3/4" | 1/32" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ANSI/ASME B107.16M, Fed. Spec. GGG-S-291F | 000000 | 000000 |
| 10" | 2 1/2" | 1/32" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ANSI/ASME B107.16M, Fed. Spec. GGG-S-291F | 000000 | 00000 |
| 12" | 3" | 1/32" | 1/32" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ANSI/ASME B107.16M, Fed. Spec. GGG-S-291F | 000000 | 00000 |
| 14" | 3 7/8" | 3/64" | 1/32" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ANSI/ASME B107.16M, Fed. Spec. GGG-S-291F | 000000 | 00000 |
Sheet Metal Cutters for Tight Spots
Straight, Right
Curves, Left Curves
Blades are tapered to give you more control when cutting straight lines, tight curves, and circles, and they're serrated to prevent slipping. These cutters are also known as duckbill snips.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 7" | 1 3/4" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Serrated × Serrated | ANSI/ASME B107.163M, Fed. Spec. GGG-S-291F | 000000 | 000000 |
| 10" | 2 1/2" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Serrated × Serrated | ANSI/ASME B107.163M, Fed. Spec. GGG-S-291F | 000000 | 00000 |
| 12" | 3" | 1/64" | 1/64" | Steel | Steel | Blue | Plastic | Manual | Serrated × Serrated | ANSI/ASME B107.163M, Fed. Spec. GGG-S-291F | 000000 | 00000 |
Sheet Metal Cutters with Replaceable Blades
Straight, Right
Curves, Left Curves
Replace blades as they wear. These cutters are also known as tinners' snips.
Cutters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Blade Kit | ||||||||||||
| Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Opening Style | Blade Edge | Specifications Met | Each | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | |||||||||||||
| 13" | 3 1/2" | 1/32" | 1/64" | Steel | Magnesium | Gray | Manual | Straight × Straight | ANSI/ASME B107.16M, Fed. Spec. GGG-S-291F | 000000 | 000000 | 000000 | 000000 |
Sheet Metal Cutters for Notching and Nibbling
Straight, Right
Curves, Left Curves
Also known as bulldog snips, these have long handles and short blades for cutting heavy material in any direction.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Cut Lg. | Steel | Stainless Steel | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||
| 16" | 2 1/2" | 1/16" | 3/64" | Steel | Steel | Blue | Plastic | Manual | Straight × Straight | ANSI/ASME B107.16M, Fed. Spec. GGG-S-291F | 000000 | 000000 |
Heavy Duty Sheet Metal Cutters
Straight, Right
Curves, Left Curves
Blades are heat treated then sharpened for increased performance and durability. Also known as tinners' snips, these cutters make straight cuts and curves.
| Overall Lg. | Cut Lg. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||
| 14 1/2" | 4" | 3/64" | Steel | Steel | Red | Plastic | Manual | Straight × Straight | 000000 | 000000 |
Heavy Duty Sheet Metal Cutters with Offset Handles
Straight, Right
Curves, Left Curves
Handles are angled to keep your hand away from the material as you cut straight lines and curves. The blades are heat treated then sharpened for increased performance and durability. These cutters are also known as tinners' snips.
| Overall Lg. | Cut Lg. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Opening Style | Blade Edge | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | |||||||||
| 14 1/4" | 4" | 3/64" | Steel | Steel | Gray | Manual | Straight × Straight | 00000000 | 000000 |
Heavy Duty Sheet Metal Cutters for Notching and Nibbling
Straight, Right
Curves, Left Curves
These cutters have long handles and short blades for cutting heavy material in any direction. The blades are heat treated then sharpened for increased performance and durability. These cutters are also known as bulldog snips.
| Overall Lg. | Cut Lg. | For Max. Steel Thick. | Blade Material | Handle Material | Handle Color | Grip Material | Opening Style | Blade Edge | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Steel, Tin | ||||||||||
| 16 1/2" | 2 1/2" | 3/64" | Steel | Steel | Red | Plastic | Manual | Straight × Straight | 0000000 | 000000 |
Smooth-Edge Electric Sheet Metal Cutters
Straight, Right
Curves, Left Curves
A double blade creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion. These cutters are also known as slotting shears. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Starting Hole Dia. | Voltage | Current, A | Cord Lg., ft. | Plug Type | Includes | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | ||||||||||||||||
| A | 1/16" | 3/64" | 3/32" | 7/32" | 7" | 14" | Steel | 2,500 | 1/2" | 120V AC | 5 | 8 | Two Prong | Lubricant, Head-Adjusting Wrench | 0000000 | 0000000 |
Electric Sheet Metal Cutters
Straight, Right
Curves, Left Curves
Use to cut patterns in flat material with minimal material loss and less effort compared to manual cutters.
Style A have an adjustable lower blade to accommodate various metal thicknesses.
Cutters | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Material | Replacement Blades | ||||||||||||||
| Steel | Stainless Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade | Housing | No-Load Strokes per Minute | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Each | Pair | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | ||||||||||||||||
| 3/64" | 3/64" | 3/64" | 1/2" | 10 1/4" | Steel | Plastic | 4,000 | 120V DC 120V AC | 4 | 8 | Two Prong | UL Listed, C-UL Listed, CSA Certified, Meets OSHA Requirements | 00000000 | 0000000 | 00000000 | 000000 |
| 1/16" | 3/64" | 1/16" | 3/4" | 10 1/4" | Steel | Plastic | 4,000 | 120V DC 120V AC | 5 | 8 | Two Prong | UL Listed, C-UL Listed, CSA Certified, Meets OSHA Requirements | 00000000 | 000000 | 00000000 | 00000 |
Electric Sheet Metal Nibblers
Straight, Right
Curves, Left Curves
Punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
Style D can also cut aluminum with the punch, die, and stripper for use on aluminum (sold separately).
For Max. Thick. | Material | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Voltage | Current, A | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | ||||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin | ||||||||||||||||
| 1/16" | 3/64" | 7/64" | 1/4" | 1 3/4" | 10 1/4" | Steel | Polycarbonate | 2,200 | 74 | 1/2" | Corrugated, Flat | Push Button | 120V DC | 5 | 0000000 | 0000000 |
(B) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 1/8" | 3/32" | 5/64" | 0.24" | 2 1/2" | 12 1/4" | Steel | Magnesium | 1,000 | 105 | 1 21/32" | Corrugated, Flat | Toggle | 120V DC 120V AC | 4 | 0000000 | 00000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 11/64" | 1/8" | 3/16" | 0.21" | 6" | 13" | Steel | Aluminum | 260 | 48 | 2 1/2" | Flat | Trigger with Lock | 110V AC | 3-5 | 0000000 | 000000 |
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 8" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | 0000000 | 00000000 |
Cutting Pattern—Straight | ||||||||||||||||
(D) For Use On Brass, Copper, Iron, Stainless Steel, Steel, Tin, Nickel | ||||||||||||||||
| 1/4" | 11/64" | 3/8" | 1/4" | 32" | 14 1/4" | Steel | Aluminum | 240 | 48 | 3 1/2" | Flat | Trigger with Lock | 120V AC | 15 | 000000 | 00000000 |
Punches | |||
|---|---|---|---|
| Replacement Punch for Style A | 00000000 | Each | 000000 |
| Optional Punch for Style D (Required for cutting aluminum) | 0000000 | Each | 00000 |
| Replacement Punch for Style D | 0000000 | Each | 00000 |
| Optional Punch for Style D (Recommended for cutting stainless steel) | 0000000 | Each | 00000 |
| Replacement Punch for Style C | 0000000 | Each | 00000 |
| Replacement Punch for Style B | 0000000 | Each | 00000 |
Dies | |||
|---|---|---|---|
| Replacement Die for Style A | 00000000 | Each | 000000 |
| Optional Die for Style D (Required for cutting aluminum) | 0000000 | Each | 00000 |
| Replacement Die for Style D | 0000000 | Each | 00000 |
| Replacement Die for Style C | 0000000 | Each | 00000 |
| Replacement Die for Style B | 0000000 | Each | 000000 |
Grease Fittings | |||
|---|---|---|---|
| Replacement Grease Fitting for Style D | 00000000 | Each | 00000 |
Strippers | |||
|---|---|---|---|
| Replacement Stripper for Style D | 00000000 | Each | 000000 |
| Optional Stripper for Style D (Required for cutting aluminum) | 0000000 | Each | 00000 |
| Replacement Stripper for Style C | 00000000 | Each | 00000 |
Assembly Screws | |||
|---|---|---|---|
| Replacement Assembly Screw for Style D | 00000000 | Each | 00000 |
Bearings | |||
|---|---|---|---|
| Replacement Bearing for Style D | 00000000 | Each | 000000 |
Cords | |||
|---|---|---|---|
| Replacement Cord for Style D | 00000000 | Each | 000000 |
| Replacement Cord for Style C | 00000000 | Each | 00000 |
| Replacement Cord for Style B | 0000000 | Each | 0000 |
Switches | |||
|---|---|---|---|
| Replacement Toggle Switch for Style B | 0000000 | Each | 000000 |
Retainers | |||
|---|---|---|---|
| Replacement Retainer for Style B | 0000000 | Each | 000000 |
Die Holders | |||
|---|---|---|---|
| Replacement Die Holder for Style B | 0000000 | Each | 0000000 |
Springs | |||
|---|---|---|---|
| Replacement Spring for Style B | 0000000 | Each | 00000 |
Electric Sheet Metal Cutters for Thin Metal
Straight, Right
Curves, Left Curves
Minimize material loss and edge distortion with these scissor-like cutters that cut metal up to 1/64" thick. Also known a scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut.
For Max. Thick. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Switch Type | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | |||||||||||||
| 1/64" | 1/64" | 7" | 16" | Steel | 2,500 | Variable Speed Trigger | 120V AC | 5 | 8 | Two Prong | Meets OSHA Requirements | 0000000 | 0000000 |
Air-Powered Sheet Metal Cutters
Straight, Right
Curves, Left Curves
Also known as slotting shears, these cutters have a double blade that creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Starting Hole Dia. | Air Consumption, cfm | Air Pressure, psi | Includes | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | ||||||||||||||
| A | 3/64" | 1/32" | 3/64" | 7/32" | 6" | 10" | Steel | 2,500 | 1/2" | 4 | 90 | Wrench, Lubricant | 0000000 | 0000000 |
| B | 1/16" | 3/64" | 3/32" | 7/32" | 7" | 10 1/2" | Steel | 2,200 | 1/2" | 4 | 90 | Wrench, Lubricant | 0000000 | 000000 |
Air-Powered Sheet Metal Nibblers
Straight, Right
Curves, Left Curves
These nibblers punch small pieces out of material to create an almost burr-free cut with no material distortion. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Punch | Housing | No-Load Strokes per Minute | Flat Stock Cutting Speed, in./min. | Starting Hole Dia. | For Texture | Switch Type | Air Consumption, cfm | Each | |
Cutting Pattern—Right Curves, Straight, Left Curves | |||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin, Plastic | |||||||||||||||
| 3/64" | __ | 1/32" | 1/4" | 1/4" | 7 1/16" | Steel | Aluminum | 3,200 | 62 | 1/2" | Corrugated | Lever | 21 | 00000000 | 0000000 |
(C) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 3/32" | 5/64" | 1/8" | 1/4" | 2" | 12" | Steel | Aluminum | 192 | 55 | 1 1/2" | Corrugated, Flat | Lever | 27 | 000000 | 000000 |
Cutting Pattern—Straight | |||||||||||||||
(D) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||
| 11/64" | 1/8" | 11/64" | 3/16" | 6" | 12" | Steel | Aluminum | 192 | 48 | 2 1/2" | Flat | Trigger with Lock | 21-23 | 00000000 | 000000 |
Air-Powered Sheet Metal Cutters for Thin Metal
Straight, Right
Curves, Left Curves
Also known a scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut metal up to 1/64" thick with minimal material loss and edge distortion.
For Max. Thick. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Air Consumption, cfm | Air Pressure, psi | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | ||||||||||||||
| 1/64" | 1/64" | 7" | 11" | Steel | 2,200 | 4 | 90 | 1/4"-1/2" | No | NPT | 1/4 | Female | 0000000 | 0000000 |
Punch Cutter Attachment for Portable Drills
Straight, Right
Curves, Left Curves
Turn your portable drill into a punch cutter for cutting curved and straight shapes in flat and corrugated sheet metal and plastic. To start cuts in the center of material, drill a starting hole.
Punch Cutter | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Replacement Punches | |||||||||||||
| Steel | Stainless Steel | Aluminum | Min. Cut Radius | Overall Lg. | For Max. Drill Speed, rpm | Shank Size | Shank Shape | Punch Material | Housing Material | Starting Hole Dia. | Each | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||||
| 1/32" | 1/32" | 1/32" | 3/16" | 5 5/8" | 3,000 | 1/4" | Hex | Steel | Plastic | 1/2" | 0000000 | 0000000 | 0000000 | 000000 |
Notch-Cutting Bench-Mount Sheet Metal Cutters
Notch, cut, and pierce a variety of materials including metal, plastic, and vinyl. These versatile cutters have an adjustable stroke length for piercing and knockout operations.
Cutters | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Overall | Mounting Holes | Replacement Blades | ||||||||||||||||||
| Notch Angle | Steel | Stainless Steel | Aluminum | Tin | Brass | Copper | Iron | Nickel | Overall Lg. | Notch Dp. | Ht. | Wd. | Handle Lg. | Weight, lbs. | No. of | Dia. | Fasteners Included | Each | Set | ||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | |||||||||||||||||||||
| 90° | 3/64" | 1/32" | 1/8" | 3/64" | 1/16" | 1/16" | 3/64" | 1/32" | 19" | 4 1/4" | 15" | 18" | 22 1/4" | 170 | 4 | 1/2" | No | 000000 | 000000000 | 000000 | 0000000 |
| Optional Floor Stand | 0000000 | Each | 0000000 |
Floor-Mount Sheet Metal Cutters
Make straight cuts in sheets. These cutters are foot operated so your hands are free to position the material.
Cutters | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Material | Overall | Max. Gauge Reading | Replacement Blades | ||||||||||||||||
| Cut Lg. | Steel | Stainless Steel | Aluminum | Tin | Brass | Copper | Iron | Nickel | Blade | Frame | Ht. | Wd. | Front | Back | Front | Back | Each | Pair | ||
Cutting Pattern—Straight | ||||||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Tin | ||||||||||||||||||||
| 37" | 3/64" | 1/32" | 1/8" | 3/64" | 1/16" | 1/16" | 3/64" | 1/32" | Steel | Cast Iron | 42" | 27" | 30" | 30" | 37" | 30" | 000000 | 000000000 | 0000000 | 0000000 |
| 52 1/4" | 3/64" | 1/32" | 1/8" | 3/64" | 1/16" | 1/16" | 3/64" | 1/32" | Steel | Cast Iron | 42" | 36" | 30" | 30" | 37" | 30" | 000000 | 00000000 | 0000000 | 000000 |
Hard-Wire Cutters
These powerful cutters make diagonal cuts with a nipping action to cut extra-hard wire with ease.