Wire End Cutters
Also known as nippers, these cutters have wide, flat jaws that cut steel wire and bolts close to the surface. A spring opens the jaws for quick cutting.
For Max. Dia. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Soft Steel | Medium-Hard Steel | Overall Lg. | Jaw Wd. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | |
| 1/8" | 1/16" | 8" | 0.59" | Steel | Steel | Plastic | Spring Assisted | 0000000 | 000000 |
Precision Wire End Cutters
Make accurate, flush cuts through small wire with these tweezer-style cutters. The smallest of our wire end cutters, they cut close to the surface with such high precision that they’re often used by jewelers to make watch repairs.
Stainless steel cutters are corrosion resistant for use in damp or humid environments. Cutters with a tungsten carbide tip stay sharp longer than any other precision wire end cutters. However, the tip is brittle and can chip from accidental impact.
Tip | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Max. Wire Dia. | Overall Lg. | Material | Lg. | Angle | Handle Material | Opening Style | Each | |
For Use On Medium-Hard Steel, Copper | ||||||||
| 0.004" | 4 1/2" | Tungsten Carbide | 3/8" | 110° | Stainless Steel | Manual | 0000000 | 0000000 |
Static-Control Wire End Cutters
Snip wire close against circuit boards and other electronic components without building up electrostatic discharge (ESD). These cutters have grips that drain static away from the blades to prevent damage to sensitive equipment. Also known as nippers, they have wide, flat jaws that make flush cuts, so you don’t nick anything beneath your wire. The box-joint design helps them maintain their jaw alignment, even after frequent use. A spring opens the jaws for quick cutting. Since the grips are plastic, they're comfortable when you're making repeat cuts and won't slip from your hands.
| For Max. Wire Dia. | Overall Lg. | Jaw Wd. | Jaw Material | Handle Material | Grip Material | Opening Style | Electrical Properties | Each | |
For Use On Medium-Hard Steel, Copper | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.046" | 4 1/2" | 7/16" | Steel | Steel | Plastic | Spring Assisted | Antistatic | 0000000 | 000000 |
Compact Bolt Cutters
Make one-handed cuts with these small cutters. Because they’re shorter than standard bolt cutters, they’re best for cutting thin bolts and wire. For more leverage, choose longer cutters. Not for use on wire rope.
All have jaws that are riveted onto the handles except cutters with aluminum handles. Riveted jaws are not replaceable.
Serrated jaws grip the material you’re cutting to prevent slipping.
Spring-assisted cutters open automatically when you release the handles to help you make quick cuts.
Cutters with stainless steel jaws and handles resist corrosion in wet and damp areas.
Cutters with aluminum handles are 30% lighter than steel-handled cutters, so they’re more comfortable for repeated cuts. Their cutting head is replaceable, and they have an adjustment screw to align cutting edges.
Cutters | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Jaw | Replacement Cutting Heads | ||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Overall Lg. | Style | Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 3/16" | 1/16" | __ | 8" | Smooth | Stainless Steel | Stainless Steel | Plastic | Spring Assisted | 0000000 | 000000 | 000000 | 00 |
| 3/16" | 1/16" | __ | 8" | Smooth | Steel | Steel | Plastic | Spring Assisted | 0000000 | 00000 | 000000 | 00 |
| 3/16" | 3/16" | 7/64" | 10" | Smooth | Steel | Aluminum | Plastic | Manual | 00000000 | 00000 | 00000000 | 000000 |
| 13/64" | 11/64" | 1/8" | 6 1/4" | Serrated | Steel | Steel | Plastic | Manual | 00000000 | 00000 | 000000 | 00 |
| 1/4" | 13/64" | 9/64" | 8" | Serrated | Steel | Steel | Plastic | Manual | 0000000 | 00000 | 000000 | 00 |
Compact Bolt Cutters with Offset Handles
An angled cutting head keeps handles up and out of the way for trimming bolts, chain, and wire against flat surfaces. Smaller than standard bolt cutters, these cutters can be used one-handed in tight spaces. They can also fit into tool pouches. However, they provide less leverage than larger cutters, so they’re best for slicing through thin bolts and wire. The jaws are riveted onto the handles and are not replaceable. Not for use on wire rope.
For Max. Dia. | Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Soft Steel | Medium-Hard Steel | Hard Steel | Overall Lg. | Head Offset Angle | Style | Material | Handle Material | Grip Material | Opening Style | Each | |
| 1/4" | 3/16" | 1/8" | 7 3/4" | 20° | Smooth | Steel | Steel | Plastic | Manual | 0000000 | 000000 |
Compact Bolt Cutter Sets
Keep a variety of small cutters on hand for cuts in tight spaces. The handles are short enough to make one-handed cuts, but they provide less leverage than standard cutters. They’re best for snipping thin bolts and wire. Use a longer cutter for more leverage. They have serrated jaws that grip the material you’re cutting and prevent it from slipping. Since the jaws are riveted onto the handles, you can’t replace them. Not for use on wire rope.
Jaw | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. of Pieces | Includes | Style | Material | Handle Material | Grip Material | Opening Style | Each | |
| 3 | 6 1/4" Lg. Bolt Cutter for 13/64" Soft Steel, 11/64" Medium-Hard Steel, and 1/8" Hard Steel Dia. 8" Lg. Bolt Cutter for 1/4" Soft Steel, 13/64" Medium-Hard Steel, and 5/32" Hard Steel Dia. 10" Lg. Bolt Cutter for 7/32" Soft Steel, 5/32" Medium-Hard Steel, and 5/32" Hard Steel Dia. | Serrated | Steel | Steel | Plastic | Manual | 0000000 | 0000000 |
Bolt, Hard Chain, and Padlock Cutters
Cut through hard metal bolts, chain, and padlocks with these cutters. All cutters have adjustment screws to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | ||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 5/16" | 3/16" | 3/16" | 1/4" | 3/16" | 14" | Steel | Steel | Rubber | Manual | 00000000 | 000000 | 000000 | 00 |
| 7/16" | 5/16" | 5/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 0000000 | 000000 |
| 7/16" | 5/16" | 5/16" | 3/8" | 5/16" | 30" | Steel | Steel | Rubber | Manual | 00000000 | 000000 | 000000 | 00 |
| 5/8" | 7/16" | 7/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 0000000 | 000000 |
| 3/4" | 1/2" | 1/2" | 1/2" | 1/2" | 42" | Steel | Steel | Rubber | Manual | 000000 | 000000 | 0000000 | 000000 |
Easy-Cut Bolt and Chain Cutters
Leverage points on the jaws and handles let you cut through bolts, chains, and rods with 30% less effort than standard bolt cutters. These cutters help reduce hand fatigue when you’re snipping through thick, hard metal or making repeated cuts. All have an adjustment screw to align cutting edges. For more leverage, choose cutters with longer handles. Not for use on wire rope.
Bolt and Chain Cutters
 A |  |  B |
 C |
Cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, wire, and rebar. All cutters have an adjustment screw to align cutting edges. For more leverage, choose a cutter with a longer handle. Not for use on wire rope.
Cutters with aluminum handles are 30% lighter than steel-handled cutters, so they’re more comfortable for repeated cuts.
Cutters with telescoping handles let you adjust to longer lengths for more leverage, or to shorter lengths for easy transport.
Cutters | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | |||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Overall Lg. | Jaw Material | Handle Material | Grip Material | Opening Style | Features | Each | Each | |||
| A | 3/16" | 1/8" | 1/8" | __ | 12" | Steel | Aluminum | Plastic | Manual | __ | 00000000 | 000000 | 00000000 | 000000 |
| A | 1/4" | 3/16" | 3/16" | __ | 14" | Steel | Aluminum | Plastic | Manual | __ | 00000000 | 00000 | 00000000 | 00000 |
| A | 5/16" | 1/4" | 1/4" | __ | 18" | Steel | Aluminum | Plastic | Manual | __ | 00000000 | 00000 | 00000000 | 00000 |
| B | 5/16" | 5/16" | 3/16" | 3/16" | 14" | Steel | Steel | Rubber | Manual | __ | 0000000 | 000000 | 0000000 | 000000 |
| B | 3/8" | 3/8" | 1/4" | 1/4" | 18" | Steel | Steel | Rubber | Manual | __ | 0000000 | 000000 | 0000000 | 000000 |
| B | 7/16" | 7/16" | 5/16" | 5/16" | 24" | Steel | Steel | Rubber | Manual | __ | 0000000 | 000000 | 0000000 | 000000 |
| B | 1/2" | 1/2" | 3/8" | 3/8" | 30" | Steel | Steel | Rubber | Manual | __ | 0000000 | 000000 | 0000000 | 000000 |
| B | 9/16" | 9/16" | 7/16" | 7/16" | 36" | Steel | Steel | Rubber | Manual | __ | 0000000 | 000000 | 0000000 | 000000 |
| B | 11/16" | 11/16" | 1/2" | __ | 42" | Steel | Steel | Rubber | Manual | __ | 000000 | 000000 | 000000 | 000000 |
| C | 5/16" | 3/16" | 3/16" | __ | 14" | Steel | Steel | Plastic | Manual | Telescoping Handles | 00000000 | 00000 | 00000000 | 00000 |
| C | 7/16" | 5/16" | 5/16" | __ | 24" | Steel | Steel | Plastic | Manual | Telescoping Handles | 00000000 | 000000 | 00000000 | 00000 |
Electrical-Insulating Bolt and Chain Cutters
Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use to cut medium steel chain and hard steel bolts, rods, screws, rivets, nails, bars, and wire. Cutters have an adjustment screw to align cutting edges. Not for use on wire rope.
Air-Powered Bolt and Chain Cutters
Slice through bolts and chain with low effort. A spring opens the jaws for quick cuts. Not for use on wire rope.
Cutters | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Overall | Replacement Cutting Heads | ||||||||||||||||
| Soft Steel | Medium-Hard Steel | Hard Steel | Rebar | Hard Chain | Lg. | Ht. | Jaw Material | Grip Material | Air Pressure | For Air Hose ID | Air Hose Included | Thread Type | Pipe Size | Gender | Each | Each | ||
| 3/8" | 3/8" | 5/16" | 5/16" | 5/16" | 15" | 7 1/4" | Steel | Rubber | 80-120psi | 3/8" | No | NPT | 3/8 | Female | 0000000 | 000000000 | 0000000 | 0000000 |
| 1/2" | 1/2" | 3/8" | 3/8" | 3/8" | 17 1/2" | 10" | Steel | Rubber | 90-130psi | 3/8" | No | NPT | 3/8 | Female | 0000000 | 00000000 | 0000000 | 000000 |
Bolt and Chain Cutters with Offset Handles
The cutting head is angled 30° from the handles, so you can cut close to a surface or in a tight space without the handles getting in your way. For example, you could use these cutters to remove a bolt end that’s sticking out the side of your machinery. They’re also great for cutting chains, rods, and wire mesh. All have an adjustment screw to align the cutting edges. For more leverage, choose a longer cutter. Not for use on wire rope.
Cutters | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Dia. | Replacement Cutting Heads | ||||||||||
| Soft Steel | Medium-Hard Steel | Overall Lg. | Head Offset Angle | Jaw Material | Handle Material | Grip Material | Opening Style | Each | Each | ||
| 3/16" | 1/8" | 12" | 30° | Steel | Steel | PVC Plastic | Manual | 0000000 | 000000 | 0000000 | 000000 |
| 1/4" | 3/16" | 18" | 30° | Steel | Steel | PVC Plastic | Manual | 0000000 | 000000 | 0000000 | 00000 |
| 3/8" | 1/4" | 24" | 30° | Steel | Steel | PVC Plastic | Manual | 0000000 | 000000 | 0000000 | 00000 |
Bench-Mount Bolt, Hard Chain, and Padlock Cutters
Make repeated cuts in hard materials with this cutter. It mounts for stability and provides extra leverage. It has a short-nosed jaw that forces the material being cut deep into the jaw and also allows you to cut one side of a chain link or padlock hasp without hitting the other side. Align cutting edges with the adjustment screw. Not for use on wire rope.